An OS command injection vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 do not have a filter or signature check to detect or prevent an upload of malicious files to the server, which may allow an attacker, acting as an administrator, to upload malicious files. This could result in cross-site scripting, deletion of system files, and remote code execution.

A stack-based buffer overflow vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to remote code execution. An attacker can send a sequence of malicious packets to trigger this vulnerability.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to an attacker using a traceroute tool to inject commands into the device. This may allow the attacker to remotely run commands on behalf of the device.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to an attacker using a ping tool to inject commands into the device. This may allow the attacker to remotely run commands on behalf of the device.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12168. This vulnerability is triggered via a crafted packet.

An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component get_cgi_from_memory. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component config_ovpn. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_122D0. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component ipsec_secrets. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_12028. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_10F2C. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component python-lib. This vulnerability is triggered via a crafted packet.

InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the function sub_1791C. This vulnerability is triggered via a crafted packet.

An OS command injection vulnerability exists in the daretools binary functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability exists in the console infactory_net functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability exists in the console infactory_port functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability exists in the console infactory_wlan functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

Improper neutralization of inputs used in an OS command in the FSx Windows File Server volume mounting component in Amazon ECS Agent on Windows before version 1.103.0 might allow a remote authenticated threat actor to execute shell commands with SYSTEM privileges on the underlying host via a specially crafted username field in an ECS task definition. This issue requires permissions to register ECS task definitions or write to the Secrets Manager or SSM Parameter Store credentials used by the FSx volume configuration. To remediate this issue, users should upgrade to version 1.103.0.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

LibreNMS versions before 26.3.0 are affected by an authenticated remote code execution vulnerability by abusing the Binary Locations config and the Netcommand feature. Successful exploitation requires administrative privileges. Exploitation could result in compromise of the underlying web server.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.

HCL DevOps Deploy / HCL Launch could allow a remote privileged authenticated attacker to execute arbitrary commands on the system by sending specially crafted input containing special elements.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

An improper neutralization of special elements vulnerability was identified in GitHub Enterprise Server that allowed an authenticated Management Console administrator to execute arbitrary OS commands via shell metacharacter injection in proxy configuration fields such as http_proxy. Exploitation of this vulnerability required access to the GitHub Enterprise Server instance and administrator privileges to the Management Console. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.1, 3.19.5, 3.18.8, 3.17.14, 3.16.17, 3.15.21, 3.14.26. This vulnerability was reported via the GitHub Bug Bounty program.

A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

Command injection in alerts in CoolerControl/coolercontrold <4.0.0 allows authenticated attackers to execute arbitrary code as root via injected bash commands in alert names

NEC Corporation Aterm WX1500HP Ver.1.4.2 and earlier and WX3600HP Ver.1.5.3 and earlier allows a attacker to execute arbitrary OS commands via the network.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

A vulnerability was found in D-Link DIR-825 and DIR-825R 1.0.5/4.5.1. Affected is the function handler_update_system_time of the file libdeuteron_modules.so of the component NTP Service. The manipulation results in os command injection. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x.x: 6.5.4.18 and below; Aruba Instant 8.5.x.x: 8.5.0.11 and below; Aruba Instant 8.6.x.x: 8.6.0.6 and below; Aruba Instant 8.7.x.x: 8.7.1.0 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

Dell VNX2 OE for File versions 8.1.21.266 and earlier, contain an authenticated remote code execution vulnerability. A remote malicious user with privileges may exploit this vulnerability to execute commands on the system.

A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.6 via the cron_interval parameter. This is due to missing input validation and sanitization. This makes it possible for authenticated attackers, with Administrator-level access and above, to execute code on the server.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

A server side remote code execution vulnerability was found in Foreman project. A authenticated attacker could use Sendmail configuration options to overwrite the defaults and perform command injection. The highest threat from this vulnerability is to confidentiality, integrity and availability of system. Fixed releases are 2.4.1, 2.5.1, 3.0.0.

The affected product permits OS command injection through improperly restricted commands, potentially allowing attackers to execute arbitrary code.

An input validation weakness was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection or cause a recoverable denial of service using a specially crafted file.

The specific CGI of the CAYIN Technology CMS does not properly validate user input, allowing a remote attacker with administrator privileges to inject OS commands into the specific parameter and execute them on the remote server.