LS ELECTRIC XBC-DN32U with operating system version 01.80 does not properly control access to the PLC over its internal XGT protocol. An attacker could control and tamper with the PLC by sending the packets to the PLC over its XGT protocol.

Attacker can use the IMAP SETACL command to inject the anyone permission to user's dovecot-acl file even if imap_acl_allow_anyone=no. This causes folders to be spammed to all users. The impact is limited to being able to spam folders to other users, no unexpected access is gained. Install to fixed version. No publicly available exploits are known.

An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. In cgi_check_ability the Format API does not have a specific case, the user permission will default to 7. This will give non-administrative users the possibility to format the SD card and reboot the device.

A denial of service vulnerability exists in the cgiserver.cgi Upgrade API functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices improperly manage access control for read-only users. This could allow an attacker to cause a temporary denial of service condition.

py-cord is a an API wrapper for Discord written in Python. Bots creating using py-cord version 2.0.0 are vulnerable to remote shutdown if they are added to the server with the `application.commands` scope without the `bot` scope. Currently, it appears that all public bots that use slash commands are affected. This issue has been patched in version 2.0.1. There are currently no recommended workarounds - please upgrade to a patched version.

An issue was discovered in Archibus Web Central 2022.03.01.107. A service exposed by the application allows a basic user to cancel (delete) a booking, created by someone else - even if this basic user is not a member of the booking

Zoom On-Premise Meeting Connector MMR before version 4.8.20220916.131 contains an improper access control vulnerability. As a result, a malicious actor in a meeting or webinar they are authorized to join could prevent participants from receiving audio and video causing meeting disruptions.

JFrog Artifactory before 7.29.3 and 6.23.38, is vulnerable to Broken Access Control, a low-privileged user is able to delete other known users OAuth token, which will force a reauthentication on an active session or in the next UI session.

A flaw was discovered in Kibana, allowing view-only users of alerting to use the run_soon API making the alerting rule run continuously, potentially affecting the system availability if the alerting rule is running complex queries.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

Incorrect access control in the Identity Provider service of usememos memos v0.25.2 allows attackers with low-level privileges to arbitrarily modify or delete registered identity providers, leading to an account takeover or Denial of Service (DoS).

pluginsGLPI's Database Inventory Plugin "manages" the Teclib' inventory agents in order to perform an inventory of the databases present on the workstation. In versions prior to 1.0.3, any authenticated user could send requests to agents. This issue has been patched in version 1.0.3.

Dify is an open-source LLM app development platform. Prior to version 0.6.12, a vulnerability was identified in the DIFY where normal users can enable or disable apps through the API, even though the web UI button for this action is disabled and normal users are not permitted to make such changes. This access control flaw allows non-admin users to make unauthorized changes, which can disrupt the functionality and availability of the APPS. This issue has been patched in version 0.6.12. A workaround for this vulnerability involves updating the API access control mechanisms to enforce stricter user role permissions and implementing role-based access controls (RBAC) to ensure that only users with admin privileges can send enable or disable requests for apps.

A flaw was found in the Wildfly Server Role Based Access Control (RBAC) provider. When authorization to control management operations is secured using the Role Based Access Control provider, a user without the required privileges can suspend or resume the server. A user with a Monitor or Auditor role is supposed to have only read access permissions and should not be able to suspend the server. The vulnerability is caused by the Suspend and Resume handlers not performing authorization checks to validate whether the current user has the required permissions to proceed with the action.

An issue in Tormach xsTECH CNC Router, PathPilot Controller v2.9.6 allows attackers to erase a critical sector of the flash memory, causing the machine to lose network connectivity and suffer from firmware corruption.

An issue was discovered in Appsmith before 1.51. A user on Appsmith that doesn't have admin permissions can trigger the restart API on Appsmith, causing a server restart. This is still within the Appsmith container, and the impact is limited to Appsmith's own server only, but there is a denial of service because it can be continually restarted. This is due to incorrect access control checks, which should check for super user permissions on the incoming request.

The Royal Elementor Addons plugin for WordPress is vulnerable to insufficient access control in the 'wpr_fix_royal_compatibility' AJAX action in versions up to, and including, 1.3.59. This allows any authenticated user, including those with subscriber-level permissions, to deactivate every plugin on the site unless it is part of an extremely limited hardcoded selection. This also switches the site to the 'royal-elementor-kit' theme, potentially resulting in availability issues.

The Royal Elementor Addons plugin for WordPress is vulnerable to insufficient access control in the 'wpr_reset_previous_import' AJAX action in versions up to, and including, 1.3.59. This allows any authenticated user, including those with subscriber-level permissions, to reset previously imported data.

A vulnerability was found in Codezips Free Exam Hall Seating Management System 1.0. It has been declared as problematic. This vulnerability affects unknown code of the file profile.php of the component Profile Image Handler. The manipulation of the argument image leads to unrestricted upload. The attack can be initiated remotely. The researcher submit confuses the vulnerability class of this issue.