A flaw was found in Undertow in versions before 2.1.1.Final, regarding the processing of invalid HTTP requests with large chunk sizes. This flaw allows an attacker to take advantage of HTTP request smuggling.

This flaw allows a malicious HTTP server to set "super cookies" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl's function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.

In Go before 1.14.14 and 1.15.x before 1.15.7, crypto/elliptic/p224.go can generate incorrect outputs, related to an underflow of the lowest limb during the final complete reduction in the P-224 field.

In PHP versions 7.2.x below 7.2.34, 7.3.x below 7.3.23 and 7.4.x below 7.4.11, when AES-CCM mode is used with openssl_encrypt() function with 12 bytes IV, only first 7 bytes of the IV is actually used. This can lead to both decreased security and incorrect encryption data.

curl would wrongly reuse an existing HTTP proxy connection doing CONNECT to a server, even if the new request uses different credentials for the HTTP proxy. The proper behavior is to create or use a separate connection.

In GNOME glib-networking through 2.64.2, the implementation of GTlsClientConnection skips hostname verification of the server's TLS certificate if the application fails to specify the expected server identity. This is in contrast to its intended documented behavior, to fail the certificate verification. Applications that fail to provide the server identity, including Balsa before 2.5.11 and 2.6.x before 2.6.1, accept a TLS certificate if the certificate is valid for any host.

libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS. libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).

Linux deployments of StorageGRID (formerly StorageGRID Webscale) versions 11.6.0 through 11.6.0.2 deployed with a Linux kernel version less than 4.7.0 are susceptible to a vulnerability which could allow a remote unauthenticated attacker to view limited metrics information and modify alert email recipients and content.

When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate.

A vulnerability exists in curl <7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop (U+002E) `.`. Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.

In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.

Oncommand Insight versions prior to 7.3.5 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.

Using libcurl, when a custom `Host:` header is first set for an HTTP request and a second request is subsequently done using the same *easy handle* but without the custom `Host:` header set, the second request would use stale information and pass on cookies meant for the first host in the second request. Leak them.

A vulnerability exists where a connection requiring TLS incorrectly reuses an existing unencrypted connection from the same connection pool. If an initial transfer is made in clear-text (via IMAP, SMTP, or POP3), a subsequent request to that same host bypasses the TLS requirement and instead transmit data unencrypted.

When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user's expectations and intentions and without telling the user it happened.

In versions prior to 3.3.0, the NGINX Controller Agent installer script 'install.sh' uses HTTP instead of HTTPS to check and install packages

In versions prior to 3.3.0, the NGINX Controller is configured to communicate with its Postgres database server over unencrypted channels, making the communicated data vulnerable to interception via man-in-the-middle (MiTM) attacks.

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.

A cleartext transmission of sensitive information vulnerability exists in curl <v7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.

A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

ONTAP Select Deploy administration utility versions 2.2 through 2.12.1 transmit credentials in plaintext.

The mincore() implementation in mm/mincore.c in the Linux kernel through 4.19.13 allowed local attackers to observe page cache access patterns of other processes on the same system, potentially allowing sniffing of secret information. (Fixing this affects the output of the fincore program.) Limited remote exploitation may be possible, as demonstrated by latency differences in accessing public files from an Apache HTTP Server.

OnCommand Unified Manager 7-Mode prior to version 5.2.4 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

OnCommand Workflow Automation versions prior to 5.0 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.

iMonitor EAM 9.6394 transmits communication between the EAM client agent and the EAM server, as well as between the EAM monitor management software and the server, in plaintext without authentication or encryption. An attacker with network access can intercept sensitive information (such as credentials, keylogger data, and personally identifiable information) and tamper with traffic. This allows both unauthorized disclosure and modification of data, including issuing arbitrary commands to client agents.

In BIG-IQ 6.0.0-6.1.0, services for stats do not require authentication nor do they implement any form of Transport Layer Security (TLS).

Cleartext Transmission of Sensitive Information between McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 February 2021 Update and McAfee Global Threat Intelligence (GTI) servers using DNS allows a remote attacker to view the requests from ENS and responses from GTI over DNS. By gaining control of an intermediate DNS server or altering the network DNS configuration, it is possible for an attacker to intercept requests and send their own responses.

Cleartext transmission of sensitive information exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier. If the telnet connection is enabled, a remote unauthenticated attacker may eavesdrop on or alter the administrator's communication to the product.

Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains a Cleartext Transmission of Sensitive Information vulnerability in the Fabric Syslog. An unauthenticated attacker with remote access could potentially exploit this vulnerability to intercept and modify information in transit.

Taipy is an open-source Python library for easy, end-to-end application development for data scientists and machine learning engineers. In affected versions session cookies are served without Secure and HTTPOnly flags. This issue has been addressed in release version 4.0.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.