Buffer overflow vulnerability in mujs before 1.0.8 due to recursion in the GC scanning phase, allows remote attackers to cause a denial of service.

USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in a large heap buffer overrun error, an attacker may exploit the vulnerability by a malicious certificate, resulting a denial of service on the affected products.

ScadaApp for iOS 1.1.4.0 contains a denial of service vulnerability that allows attackers to crash the application by inputting an oversized buffer in the Servername field. Attackers can paste a 257-character buffer during login to trigger an application crash on iOS devices.

Foscam Video Management System 1.1.4.9 contains a denial of service vulnerability in the username input field that allows attackers to crash the application. Attackers can overwrite the username with a 520-byte buffer of repeated 'A' characters to trigger an application crash during device login.

libvncclient/sockets.c in LibVNCServer before 0.9.13 has a buffer overflow via a long socket filename.

An issue was discovered in EFS Easy Chat Server 3.1. There is a buffer overflow via a long body2.ghp message parameter.

Memcached 1.6.x before 1.6.2 allows remote attackers to cause a denial of service (daemon crash) via a crafted binary protocol header to try_read_command_binary in memcached.c.

An issue was discovered in Foxit PhantomPDF before 8.3.11. It has a buffer overflow because a looping correction does not occur after JavaScript updates Field APs.

A buffer overflow vulnerability in FTPDMIN 0.96 allows attackers to crash the server via a crafted packet.

engine.c in slaacd in OpenBSD 6.9 and 7.0 before 2022-02-21 has a buffer overflow triggerable by an IPv6 router advertisement with more than seven nameservers. NOTE: privilege separation and pledge can prevent exploitation.

A weakness has been identified in Shiguangwu sgwbox N3 2.0.25. Affected by this vulnerability is an unknown functionality of the file /usr/sbin/http_eshell_server of the component WIREDCFGGET Interface. Executing manipulation of the argument params can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

When a BIG-IP APM access policy is configured on a virtual server, undisclosed traffic can cause the apmd process to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

MariaDB Server v10.7 and below was discovered to contain a global buffer overflow in the component decimal_bin_size, which is exploited via specially crafted SQL statements.

nginx njs 0.7.2 is vulnerable to Buffer Overflow. Type confused in Array.prototype.concat() when a slow array appended element is fast array.

A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

SICK FX0-GPNT00000 and FX0-GENT00000 devices through 3.4.0 have a Buffer Overflow

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability was found in PCMan FTP Server 2.0.7 and classified as problematic. This issue affects some unknown processing of the component STOR Command Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251555.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

stb_truetype.h v1.26 was discovered to contain a heap-buffer-overflow via the function ttUSHORT() at stb_truetype.h. NOTE: Third party has disputed stating that the source code has also a disclaimer that it should only be used with trusted input.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

An issue was discovered in WinAPRS 2.9.0. A buffer overflow in DIGI address processing for VHF KISS packets allows a remote attacker to cause a denial of service (daemon crash) via a malicious AX.25 packet over the air. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Firebird is an open-source relational database management system. In versions prior to 5.0.4, 4.0.7 and 3.0.14, when deserializing a slice packet, the xdr_datum() function does not validate that a cstring length conforms to the slice descriptor bounds, allowing a cstring longer than the allocated buffer to overflow it. An unauthenticated attacker can exploit this by sending a crafted packet to the server, potentially causing a crash or other security impact. This issue has been fixed in versions 5.0.4, 4.0.7 and 3.0.14.

The asn1_signature function in asn1.c in Cameron Hamilton-Rich axTLS through 2.1.5 has a Buffer Overflow that allows remote attackers to cause a denial of service (memory and CPU consumption) via a crafted certificate in the TLS certificate handshake message, because the result of get_asn1_length() is not checked for a minimum or maximum size.

IOWOW is a C utility library and persistent key/value storage engine. Versions 1.4.15 and prior contain a stack buffer overflow vulnerability that allows for Denial of Service (DOS) when it parses scientific notation numbers present in JSON. A patch for this issue is available at commit a79d31e4cff1d5a08f665574b29fd885897a28fd in the `master` branch of the repository. There are no workarounds other than applying the patch.

A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as problematic. This vulnerability affects unknown code of the component PUT Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251554 is the identifier assigned to this vulnerability.

A Buffer Overflow vulnerability in the PFE of Juniper Networks Junos OS on SRX series allows an unauthenticated network based attacker to cause a Denial of Service (DoS). The PFE will crash when specific traffic is scanned by Enhanced Web Filtering safe-search feature of UTM (Unified Threat management). Continued receipt of this specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: 20.2 versions prior to 20.2R3-S4 on SRX Series; 20.3 versions prior to 20.3R3-S3 on SRX Series; 20.4 versions prior to 20.4R3-S3 on SRX Series; 21.1 versions prior to 21.1R3-S1 on SRX Series; 21.2 versions prior to 21.2R2-S2, 21.2R3 on SRX Series; 21.3 versions prior to 21.3R2 on SRX Series; 21.4 versions prior to 21.4R2 on SRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 20.2R1.

Vulnerability exists in SCI IEC 60870-5-104 and HCI IEC 60870-5-104 that affects the RTU500 series product versions listed below. Specially crafted messages sent to the mentioned components are not validated properly and can result in buffer overflow and as final consequence to a reboot of an RTU500 CMU.

A vulnerability exists in the HCI Modbus TCP function included in the product versions listed above. If the HCI Modbus TCP is enabled and configured, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500 in a high rate, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a lack of flood control which eventually if exploited causes an internal stack overflow in the HCI Modbus TCP function.

tftpd_file.c in atftp through 0.7.4 has a buffer overflow because buffer-size handling does not properly consider the combination of data, OACK, and other options.

Some Huawei products have a buffer error vulnerability. An unauthenticated, remote attacker could send specific MPLS Echo Request messages to the target products. Due to insufficient input validation of some parameters in the messages, successful exploit may cause the device to reset.

OpenAirInterface Version 2.2.0 has a Buffer Overflow vulnerability in processing UplinkNASTransport containing Authentication Response containing a NAS PDU with oversize response (For example 100 byte). The response is decoded by AMF and passed to the AUSF component for verification. AUSF crashes on receiving this oversize response. This can prohibit users from further registration and verification and can cause Denial of Services (DoS).

Pinkie 2.15 allows remote attackers to cause a denial of service (daemon crash) via a TFTP read (RRQ) request, aka opcode 1.

An issue was discovered in Foxit Reader and PhantomPDF before 9.6. It has a buffer overflow because a looping correction does not occur after JavaScript updates Field APs.

There is a vulnerability in DHCPv6 packet parsing code that could be explored by remote attacker to craft a packet that could cause buffer overflow in a memcpy call, leading to out-of-bounds memory write that would cause dhcp6relay to crash. Dhcp6relay is a critical process and could cause dhcp relay docker to shutdown. Discovered by Eugene Lim of GovTech Singapore.

NBMonitor 1.6.8 contains a denial of service vulnerability that allows attackers to crash the application by overflowing the registration code input field. Attackers can paste a 256-character buffer into the registration key field to trigger an application crash and potential system instability.

Nsauditor 3.2.3 contains a denial of service vulnerability in the registration code input field that allows attackers to crash the application. Attackers can paste a large buffer of 256 repeated characters into the 'Key' field to trigger an application crash.

A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 26.4 and iPadOS 26.4. A remote attacker may be able to cause a denial-of-service.

fast-xml-parser allows users to validate XML, parse XML to JS object, or build XML from JS object without C/C++ based libraries and no callback. Prior to version 5.3.8, the application crashes with stack overflow when user use XML builder with `preserveOrder:true`. Version 5.3.8 fixes the issue. As a workaround, use XML builder with `preserveOrder:false` or check the input data before passing to builder.

Tenda AC10-1200 v15.03.06.23_EN was discovered to contain a buffer overflow in the setSmartPowerManagement function.

Backup Key Recovery 2.2.7 contains a denial of service vulnerability that allows attackers to crash the application by overflowing the registration code input field. Attackers can paste a large buffer of 256 repeated characters into the registration key field to trigger application instability and potential crash.

A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. An app may be able to cause unexpected system termination.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

Leawo Prof. Media 11.0.0.1 contains a denial of service vulnerability that allows attackers to crash the application by supplying an oversized payload in the activation keycode field. Attackers can generate a 6000-byte buffer of repeated characters to trigger an application crash when pasted into the registration interface.

Buffer Overflow vulnerability in PX4-Autopilot allows attackers to cause a denial of service via handler function handling msgid 332.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.