A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could cause a stack-based buffer overflow, potentially leading to remote code execution when an attacker sends specially crafted alarm data messages. Affected Products: IGSS Data Server - IGSSdataServer.exe (Versions prior to V15.0.0.22170)

Buffer overflow in the mipsnet_receive function in hw/net/mipsnet.c in QEMU, when the guest NIC is configured to accept large packets, allows remote attackers to cause a denial of service (memory corruption and QEMU crash) or possibly execute arbitrary code via a packet larger than 1514 bytes.

A LoadLibraryEX vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to load an attacker-controlled DLL into a key executable, leading to execution of attacker-supplied code under the context of SYSTEM on affected installations.

TOTOLINK A950RG V4.1.2cu.5204_B20210112 contains a buffer overflow vulnerability in the setUrlFilterRules interface of /lib/cste_modules/firewall.so. The vulnerability occurs because the `url` parameter is not properly validated for length, allowing remote attackers to trigger a buffer overflow, potentially leading to arbitrary code execution or denial of service.

A buffer overflow vulnerability exists in TOTOLINK A950RG V4.1.2cu.5204_B20210112. The issue resides in the setRadvdCfg interface of the /lib/cste_modules/ipv6.so module. The function fails to properly validate the length of the user-controlled radvdinterfacename parameter, allowing remote attackers to trigger a stack buffer overflow.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When copying the contents of the first fragment (offset=0) into the reassembly buffer, no size check is performed. It is possible to force the creation of a small reassembly buffer by first sending a shorter fragment (also with offset=0). Overflowing the reassembly buffer corrupts the state of other packet buffers which an attacker might be able to used to achieve further memory corruption (potentially resulting in remote code execution). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be included and the attacker must be able to send arbitrary IPv6 packets to the victim. Version 2025.10 fixes the issue.

A Buffer overflow vulnerability in function fromAdvSetMacMtuWan of bin httpd in Tenda AC10V4.0 V16.03.10.20 allows remote attackers to cause denial of service and possibly code execution by sending a post request with a crafted payload (field `serviceName`) to /goform/AdvSetMacMtuWan.

A vulnerability in the management interface of MiVoice Business through 9.3 PR1 and MiVoice Business Express through 8.0 SP3 PR3 could allow an unauthenticated attacker (that has network access to the management interface) to conduct a buffer overflow attack due to insufficient validation of URL parameters. A successful exploit could allow arbitrary code execution.

Capstone is a disassembly framework. In versions 6.0.0-Alpha5 and prior, an unchecked vsnprintf return in SStream_concat lets a malicious cs_opt_mem.vsnprintf drive SStream’s index negative or past the end, leading to a stack buffer underflow/overflow when the next write occurs. Commit 2c7797182a1618be12017d7d41e0b6581d5d529e fixes the issue.

Prime95 30.7 build 9 suffers from a Buffer Overflow vulnerability that could lead to Remote Code Execution.

nfs_lookup_reply in net/nfs.c in Das U-Boot through 2022.04 (and through 2022.07-rc2) has an unbounded memcpy with a failed length check, leading to a buffer overflow. NOTE: this issue exists because of an incorrect fix for CVE-2019-14196.

Meltytech Shotcut 25.10.31 is vulnerable to Buffer Overflow. A memory access violation occurs when processing MLT project files with manipulated width and height parameters. By setting these values to extremely large numbers, the application attempts to allocate excessive memory during image processing, triggering a buffer overflow in the mlt_image_fill_white function.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. The firmware contains a potential buffer overflow by calling strcpy() without checking the string length beforehand.

Tenda AC18 V15.03.3.10_EN was discovered to contain a stack-based buffer overflow vulnerability via the deviceId parameter at ip/goform/saveParentControlInfo.

free5gc v4.1.0 and before is vulnerable to Buffer Overflow. When AMF receives an UplinkRANConfigurationTransfer NGAP message from a gNB, the AMF process crashes.

Memory corruption while handling payloads from remote ESL.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions prior to and including 2.12.1 a stack buffer overflow vulnerability affects PJSIP users that use STUN in their applications, either by: setting a STUN server in their account/media config in PJSUA/PJSUA2 level, or directly using `pjlib-util/stun_simple` API. A patch is available in commit 450baca which should be included in the next release. There are no known workarounds for this issue.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetEnableWizard.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formLanSetupRouterSettings.

Azure RTOS USBX is a USB host, device, and on-the-go (OTG) embedded stack. Prior to version 6.1.11, he USBX DFU UPLOAD functionality may be utilized to introduce a buffer overflow resulting in overwrite of memory contents. In particular cases this may allow an attacker to bypass security features or execute arbitrary code. The implementation of `ux_device_class_dfu_control_request` function does not assure that a buffer overflow will not occur during handling of the DFU UPLOAD command. When an attacker issues the `UX_SLAVE_CLASS_DFU_COMMAND_UPLOAD` control transfer request with `wLenght` larger than the buffer size (`UX_SLAVE_REQUEST_CONTROL_MAX_LENGTH`, 256 bytes), depending on the actual implementation of `dfu -> ux_slave_class_dfu_read`, a buffer overflow may occur. In example `ux_slave_class_dfu_read` may read 4096 bytes (or more up to 65k) to a 256 byte buffer ultimately resulting in an overflow. Furthermore in case an attacker has some control over the read flash memory, this may result in execution of arbitrary code and platform compromise. A fix for this issue has been included in USBX release 6.1.11. As a workaround, align request and buffer size to assure that buffer boundaries are respected.

A vulnerability was found in Tenda AC7 15.03.06.44 and classified as critical. This issue affects the function formSetPPTPUserList of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow vulnerability exists in the razeraccessory driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromAdvSetMacMtuWan function via the serverName parameter.

A vulnerability has been found in FreeFloat FTP Server 1.0 and classified as critical. This vulnerability affects unknown code of the component SET Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow vulnerability exists in the razerkbd driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the saveParentControlInfo function via the deviceName parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

A vulnerability, which was classified as critical, was found in Tenda AC10 up to 15.03.06.47. This affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg of the component HTTP Handler. The manipulation of the argument startIp/endIp leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Tenda O3V2 1.0.0.12(3880) is vulnerable to Buffer Overflow in the fromSafeSetMacFilter function via the mac parameter.

A vulnerability, which was classified as critical, was found in FreeFloat FTP Server 1.0. This affects an unknown part of the component HOST Command Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromSetSysTime function via the ntpServer parameter.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. Affected by this issue is some unknown functionality of the component PASSIVE Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in WAVLINK QUANTUM D2G, QUANTUM D3G, WL-WN530G3A, WL-WN530HG3, WL-WN532A3 and WL-WN576K1 up to V1410_240222 and classified as critical. Affected by this issue is the function sys_login of the file /cgi-bin/login.cgi of the component HTTP POST Request Handler. The manipulation of the argument login_page leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

RIOT-OS, an operating system that supports Internet of Things devices, has an ineffective size check implemented with `assert()` can lead to buffer overflow in versions up to and including 2025.04. Assertions are usually compiled out in production builds. If assertions are the only defense against untrusted inputs, the software may be exposed to attacks that utilize the lack of proper input checks. In the `l2filter_add()` function shown below, `addr_len` is checked using an assertion and is subsequently used as an argument in a `memcpy()` call. When assertions are disabled, there would be no size check for `addr_len`. As a consequence, if an attacker were to provide an `addr_len` value larger than `CONFIG_L2FILTER_ADDR_MAXLEN`, they can trigger a buffer overflow and write past the `list[i].addr` buffer. If the unchecked input is attacker-controlled, the impact of the buffer overflow can range from a denial of service to arbitrary code execution. Commit f6f7de4ccc107c018630e4c15500825caf02e1c2 contains a patch for the vulnerability.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress() that results in a memory corruption and probably even a remote code execution.

A buffer overflow vulnerability exists in the razermouse driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

Small HTTP Server version 3.06 suffers from a remote buffer overflow vulnerability via long GET request.

There is a buffer overflow vulnerability in CV81-WDM FW 01.70.49.29.46. Successful exploitation of this vulnerability may lead to privilege escalation.

Tenda TX9 Pro 22.03.02.10 devices have a SetNetControlList buffer overflow.

A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as critical. This vulnerability affects unknown code of the component NLST Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component PWD Command Handler. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in FreeFloat FTP Server 1.0. This affects an unknown part of the component RETR Command Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

miniupnp before 4c90b87, as used in Bitcoin Core before 0.12 and other products, lacks checks for snprintf return values, leading to a buffer overflow and significant data leak, a different vulnerability than CVE-2019-12107. In Bitcoin Core before 0.12, remote code execution was possible in conjunction with CVE-2015-6031 exploitation.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. Affected by this issue is some unknown functionality of the component MDIR Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in FreeFloat FTP Server 1.0. Affected is an unknown function of the component PROMPT Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in FreeFloat FTP Server 1.0.0. Affected is an unknown function of the component LITERAL Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.