The Booking for Appointments and Events Calendar – Amelia plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 1.2.19 via the 'wpAmeliaApiCall' function. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

A vulnerability was identified in h2oai h2o-3 up to 7402. Affected by this issue is the function importFiles of the file h2o-core/src/main/java/water/persist/PersistNFS.java of the component ImportFile API. Such manipulation leads to information disclosure. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in calcom cal.diy up to 4.9.4. Affected by this issue is the function getServerSideProps of the file apps/web/modules/bookings/views/bookings-single-view.getServerSideProps.tsx of the component Generic React API. This manipulation of the argument cancelledBy/rescheduledBy causes information disclosure. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in NousResearch hermes-agent up to 2026.4.23. This issue affects the function _make_run_env of the file tools/environments/local.py of the component Messaging Gateway Handler. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Verify Privilege On-Premises 11.5 could disclose sensitive information through an HTTP request that could aid an attacker in further attacks against the system. IBM X-Force ID: 240452.

ClipSoft REXPERT 1.0.0.527 and earlier version have an information disclosure issue. When requesting web page associated with session, could leak username via session file path of HTTP response data. No authentication is required.

Sensitive Information Disclosure vulnerability discovered by Quiz And Survey Master plugin <= 7.3.10 on WordPress.

A vulnerability in the web-based management interface of Cisco Application Policy Infrastructure Controller (APIC) Software could allow an unauthenticated, remote attacker to access sensitive system usage information. The vulnerability is due to a lack of proper data protection mechanisms for certain components in the underlying Application Centric Infrastructure (ACI). An attacker could exploit this vulnerability by attempting to observe certain network traffic when accessing the APIC. A successful exploit could allow the attacker to access and collect certain tracking data and usage statistics on an affected device.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

A vulnerability was found in code-projects Online Application System for Admission 1.0. Impacted is an unknown function of the file /enrollment/database/oas.sql. Performing a manipulation results in insecure storage of sensitive information. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

The WhatsOrder – Instant Checkout for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.1 via the yapacdev_generate_order_pdf. This makes it possible for unauthenticated attackers to extract sensitive customer PII and order details — including full name, email address, phone number, billing address, ordered items with quantities and prices, applied coupons, shipping method, and order total — from any customer's invoice by enumerating sequential order IDs. Invoice HTML files are written to the publicly accessible wp-content/uploads/whatsorder_invoices/ directory, which is created without an .htaccess deny rule or index.php guard, making every invoice directly downloadable over HTTP with no authentication check.

A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 18.3 and iPadOS 18.3. An app may be able to enumerate a user's installed apps.

The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.22.1 via a misconfigured capability check in the 'permissionsCheck' function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to extract sensitive data including reports detailing donors and donation amounts.

A security flaw has been discovered in FlowiseAI Flowise up to 3.0.12. Affected is the function Login of the file packages/server/src/enterprise/services/account.service.ts of the component API Response Handler. The manipulation results in information disclosure. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is told to be difficult. You should upgrade the affected component.

The Easy Digital Downloads – eCommerce Payments and Subscriptions made easy plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.3.6.1 via the edd_ajax_get_download_title() function. This makes it possible for unauthenticated attackers to extract private post titles of downloads. The impact here is minimal.

A vulnerability has been found in PicoTronica e-Clinic Healthcare System ECHS 5.7. This affects an unknown function of the file /cdemos/echs/api/v2/ of the component Response Header Handler. Such manipulation leads to information disclosure. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. Upgrading to version 5.7.1 mitigates this issue. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

The Activity Logs, User Activity Tracking, Multisite Activity Log from Logtivity plugin for WordPress is vulnerable to Authentication Bypass to Information Disclosure in versions up to, and including, 3.3.6. This is due to a logic flaw in the verifyAuthorization method where requests without an Authorization header skip Bearer token validation and fall through to an unconditional return true statement, bypassing all authentication checks. This makes it possible for unauthenticated attackers to access the /wp-json/logtivity/v1/options REST API endpoint and retrieve all plugin configuration options, including the logtivity_site_api_key which can be used to impersonate the site in API calls to the Logtivity service.

An exposure of sensitive information to an unauthorized actor vulnerability [CWE-200] in FortiNAC 9.4.1 and below, 9.2.6 and below, 9.1.8 and below, 8.8.11 and below, 8.7.6 and below may allow an unauthenticated attacker to access sensitive information via crafted HTTP requests.

IBM Security Verify Privilege On-Premises 11.5 could disclose sensitive information through an HTTP request that could aid an attacker in further attacks against the system. IBM X-Force ID: 240453.

Karotz API 12.07.19.00: Session Token Information Disclosure

The WP Go Maps WordPress plugin before 10.0.10 does not properly enforce the marker approval filter on the admin-ajax fallback for its datatables route, allowing unauthenticated visitors to retrieve marker records that the site owner has not approved for public display, including their title, category, address and description fields.

The WP Go Maps WordPress plugin before 10.0.10 does not perform any approval-state filtering on its public single-marker REST endpoint, allowing unauthenticated users to retrieve marker records that an administrator has not yet approved for public display, including any PII placed in the address and description fields and the marker's geographic coordinates.

A vulnerability was found in code-projects Simple ChatBox 1.0. Affected by this issue is the function SimpleChatbox_PHP of the file chatbox.sql of the component Endpoint. Performing a manipulation results in file and directory information exposure. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

Jenkins Mercurial Plugin 1251.va_b_121f184902 and earlier provides information about which jobs were triggered or scheduled for polling through its webhook endpoint, including jobs the user has no permission to access.

A vulnerability was detected in arnobt78 Hotel Booking Management System up to f8922d0e0f6ac1cc761974c7616f44c2bbc04bea. The impacted element is an unknown function of the file /api/health/detailed of the component Health Check Endpoint. Performing a manipulation results in information disclosure. Remote exploitation of the attack is possible. The exploit is now public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Mattermost Server before 4.2.0, 4.1.1, and 4.0.5. It allows attackers to obtain sensitive information (user statuses) via a REST API version 4 endpoint.

A security vulnerability has been detected in CodeAstro Online Job Portal 1.0. Affected by this vulnerability is an unknown functionality of the file /users/user-cvs/. The manipulation leads to file and directory information exposure. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A vulnerability in the directory permissions of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to access sensitive information on an affected device. This vulnerability exists because the product exposes sensitive information to an actor that is not explicitly authorized to have access to that information. An attacker could exploit this vulnerability by sending a crafted packet to the IP address of a device that has Web Access enabled. A successful exploit could allow the attacker to access sensitive information from the device. Note: To exploit this vulnerability, Web Access must be enabled on the phone. Web Access is disabled by default.

The Slider Revolution plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to, and including, 7.0.9 via the 'get_stream_data()' function. This makes it possible for unauthenticated attackers to extract sensitive data including published password-protected post, page, and product content.

Concrete CMS 9.5.0 and below  is vulnerable to unauthenticated file usage disclosure via missing permission check in the usage controller.  Any unauthenticated visitor can request /ccm/system/dialogs/file/usage/{fID} with any file ID and receive a list of every page that references that file, including page IDs, handles, and full URLs. This includes pages that are otherwise restricted by permissions.The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 6.9 with vector CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N. Thanks Eldudareeno for reporting.

Telean before 1.3.1 contains a full path disclosure vulnerability which could allow remote attackers to obtain sensitive information through a specially crafted URL request.

A vulnerability was found in Acrel Electrical Prepaid Cloud Platform 1.0. This issue affects some unknown processing of the file /bin.rar of the component Backup File Handler. The manipulation results in information disclosure. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in code-projects Online FIR System 1.0. Affected by this issue is some unknown functionality of the file /complaints.sql of the component SQL Database Backup File Handler. The manipulation results in insecure storage of sensitive information. The attack may be performed from remote. The exploit is now public and may be used.

A vulnerability in the packet filtering features of Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to bypass Layer 3 and Layer 4 traffic filters. This vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by sending a crafted packet to the affected device. A successful exploit could allow the attacker to bypass the Layer 3 and Layer 4 traffic filters and inject a crafted packet into the network.

The web interface in VideoLAN VLC media player before 2.0.7 has no access control which allows remote attackers to view directory listings via the 'dir' command or issue other commands without authenticating.

ezplatform-graphql is a GraphQL server implementation for Ibexa DXP and Ibexa Open Source. Versions prior to 2.3.12 and 1.0.13 are subject to Insecure Storage of Sensitive Information. Unauthenticated GraphQL queries for user accounts can expose password hashes of users that have created or modified content, typically administrators and editors. This issue has been patched in versions 2.3.12, and 1.0.13 on the 1.X branch. Users unable to upgrade can remove the "passwordHash" entry from "src/bundle/Resources/config/graphql/User.types.yaml" in the GraphQL package, and other properties like hash type, email, login if you prefer.

An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03, which could let a malicious user obtain sensitive information. which could let a malicious user obtain sensitive information.

A vulnerability classified as problematic has been found in SourceCodester Book Store Management System 1.0. This affects an unknown part of the file /bsms_ci/index.php/user/edit_user/. The manipulation of the argument password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-214587.

Verax NMS prior to 2.1.0 leaks connection details when any user executes a Repair Table action

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. When changes made by an IP address are reassigned to a user (using reassignEdits.php), the changes will still be attributed to the IP address on Special:Contributions when doing a range lookup.

Capgo before 12.128.2 fails to strip EXIF metadata including GPS geolocation data from uploaded images, allowing information disclosure. Attackers can download uploaded images and extract precise latitude and longitude coordinates revealing user physical location at capture time.

Cap-go capgo before 12.128.2 contains an authorization bypass in several Supabase PostgREST RPC functions (get_app_metrics, get_global_metrics, get_total_metrics) that are granted to the anon role without enforcing org membership or permission checks. An unauthenticated attacker using only the public Supabase API key (sb_publishable_*) can query arbitrary org_id values to disclose cross-tenant usage telemetry (MAU, bandwidth, installs, gets), enumerate app IDs for a target org, and determine org existence via an oracle (valid org returns metrics, invalid returns []).

Capgo before 12.128.2 contains an information disclosure vulnerability in the unauthenticated /replication endpoint that exposes internal PostgreSQL replication telemetry including slot names and WAL LSN positions. Attackers can access this endpoint without authentication to retrieve sensitive infrastructure details such as replication slot names, confirmed_flush_lsn, restart_lsn values, and database error messages for reconnaissance purposes.

IBM Maximo Asset Management 7.6.1.2 and 7.6.1.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 237587.

A vulnerability has been found in Anhui Xufan Information Technology EasyCVR up to 2.7.0 and classified as problematic. This vulnerability affects unknown code of the file /api/v1/getbaseconfig. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Capgo before 12.128.2 contains an information disclosure vulnerability in the public.exist_app_v2 RPC function that allows unauthenticated attackers to enumerate app_ids by calling POST /rest/v1/rpc/exist_app_v2 with arbitrary appid parameters. Remote attackers can exploit this SECURITY DEFINER function to determine whether specific app_ids exist in the public.apps table, enabling cross-tenant app enumeration and privacy violations.

The Magic Import Document Extractor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.4 via the get_frontend_settings() function. This makes it possible for unauthenticated attackers to extract the site's magicimport.ai license key from the page source on any page containing the plugin's shortcode.

A vulnerability classified as problematic has been found in ethitter WP-Print-Friendly up to 0.5.2. This affects an unknown part of the file wp-print-friendly.php. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. Upgrading to version 0.5.3 is able to address this issue. The identifier of the patch is 437787292670c20b4abe20160ebbe8428187f2b4. It is recommended to upgrade the affected component. The identifier VDB-217269 was assigned to this vulnerability.

Capgo before 12.128.2 contains an information disclosure vulnerability in the /private/validate_password_compliance endpoint that returns different error responses for malformed, non-existent, and existing organization IDs. Unauthenticated attackers can enumerate valid organization UUIDs by observing response status codes and error messages, allowing confirmation of organization existence.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. Users without the right to view documents can deduce their existence by repeated Livetable queries. The issue has been patched in XWiki 14.6RC1, 13.10.8, and 14.4.3, the response is not properly cleaned up of obfuscated entries. As a workaround, The patch for the document `XWiki.LiveTableResultsMacros` can be manually applied or a XAR archive of a patched version can be imported, on versions 12.10.11, 13.9-rc-1, and 13.4.4. There are no known workarounds for this issue.