Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

In Spring Boot versions 3.0.0 - 3.0.5, 2.7.0 - 2.7.10, and older unsupported versions, an application that is deployed to Cloud Foundry could be susceptible to a security bypass. Users of affected versions should apply the following mitigation: 3.0.x users should upgrade to 3.0.6+. 2.7.x users should upgrade to 2.7.11+. Users of older, unsupported versions should upgrade to 3.0.6+ or 2.7.11+.

VMware Aria Operations for Logs contains an authentication bypass vulnerability. An unauthenticated, malicious actor can inject files into the operating system of an impacted appliance which can result in remote code execution.

vCenter Server contains an out-of-bounds write vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger an out-of-bounds write potentially leading to remote code execution.

A security filter misconfiguration exists in VMware Hyperic Server 5.8.6. Exploitation of this vulnerability enables a malicious party to bypass some authentication requirements when issuing requests to Hyperic Server. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Spring Tools 4 for Eclipse version 4.16.0 and below as well as VSCode extensions such as Spring Boot Tools, Concourse CI Pipeline Editor, Bosh Editor and Cloudfoundry Manifest YML Support version 1.39.0 and below all use Snakeyaml library for YAML editing support. This library allows for some special syntax in the YAML that under certain circumstances allows for potentially harmful remote code execution by the attacker.

SFCB (Small Footprint CIM Broker) as used in ESXi has an authentication bypass vulnerability. A malicious actor with network access to port 5989 on ESXi may exploit this issue to bypass SFCB authentication by sending a specially crafted request.

The vSphere Web Client (FLEX/Flash) contains an SSRF (Server Side Request Forgery) vulnerability in the vSAN Web Client (vSAN UI) plug-in. A malicious actor with network access to port 443 on vCenter Server may exploit this issue by accessing a URL request outside of vCenter Server or accessing an internal service.

The vCenter Server contains a heap-overflow vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger this vulnerability by sending a specially crafted network packet potentially leading to remote code execution.

VMware Workspace ONE Access and Identity Manager, allow the /cfg web app and diagnostic endpoints, on port 8443, to be accessed via port 443 using a custom host header. A malicious actor with network access to port 443 could tamper with host headers to facilitate access to the /cfg web app, in addition a malicious actor could access /cfg diagnostic endpoints without authentication.

The vSphere Client (HTML5) contains a remote code execution vulnerability in a vCenter Server plugin. A malicious actor with network access to port 443 may exploit this issue to execute commands with unrestricted privileges on the underlying operating system that hosts vCenter Server. This affects VMware vCenter Server (7.x before 7.0 U1c, 6.7 before 6.7 U3l and 6.5 before 6.5 U3n) and VMware Cloud Foundation (4.x before 4.2 and 3.x before 3.10.1.2).

VMware Carbon Black App Control 8.0, 8.1, 8.5 prior to 8.5.8, and 8.6 prior to 8.6.2 has an authentication bypass. A malicious actor with network access to the VMware Carbon Black App Control management server might be able to obtain administrative access to the product without the need to authenticate.

Scheduler for TAS prior to version 1.4.0 was permitting plaintext transmission of UAA client token by sending it over a non-TLS connection. This also depended on the configuration of the MySQL server which is used to cache a UAA client token used by the service. If intercepted the token can give an attacker admin level access in the cloud controller.

vRealize Operations for Horizon Adapter (6.7.x prior to 6.7.1 and 6.6.x prior to 6.6.1) uses a JMX RMI service which is not securely configured. An unauthenticated remote attacker who has network access to vRealize Operations, with the Horizon Adapter running, may be able to execute arbitrary code in vRealize Operations.

VMware VMware Fusion (11.x before 11.0.3) contains a security vulnerability due to certain unauthenticated APIs accessible through a web socket. An attacker may exploit this issue by tricking the host user to execute a JavaScript to perform unauthorized functions on the guest machine where VMware Tools is installed. This may further be exploited to execute commands on the guest machines.

VMware vCenter Server 5.5, 6.0, 6.5 allows vSphere users with certain, limited vSphere privileges to use the VIX API to access Guest Operating Systems without the need to authenticate.

VMware Horizon DaaS (7.x and 8.x before 8.0.1 Update 1) contains a broken authentication vulnerability due to a flaw in the way it handled the first factor authentication. Successful exploitation of this issue may allow an attacker to bypass two-factor authentication process. In order to exploit this issue, an attacker must have a legitimate account on Horizon DaaS.

VMware Workspace ONE Content contains a passcode bypass vulnerability. A malicious actor, with access to a users rooted device, may be able to bypass the VMware Workspace ONE Content passcode.

VMware Workspace ONE Access and Identity Manager contain a broken authentication vulnerability. VMware has evaluated the severity of this issue to be in the Moderate severity range with a maximum CVSSv3 base score of 5.3.

The vCenter Server contains an information disclosure vulnerability due to an unauthenticated appliance management API. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to gain access to sensitive information.

Computing For Good's Basic Laboratory Information System (also known as C4G BLIS) version 3.4 and earlier suffers from an instance of CWE-284, "Improper Access Control." As a result, an unauthenticated user may change the password of any administrator-level user.

In Totolink A3100R V5.9c.4577, multiple pages can be read by curl or Burp Suite without authentication. Additionally, admin configurations can be set without cookies.

upgrademysqlstatus in databases/views.py in CyberPanel (aka Cyber Panel) before 5b08cd6 allows remote attackers to bypass authentication and execute arbitrary commands via /dataBases/upgrademysqlstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

Emerson Dixell XWEB-500 products are affected by arbitrary file write vulnerability in /cgi-bin/logo_extra_upload.cgi, /cgi-bin/cal_save.cgi, and /cgi-bin/lo_utils.cgi. An attacker will be able to write any file on the target system without any kind of authentication mechanism, and this can lead to denial of service and potentially remote code execution. Note: the product has not been supported since 2018 and should be removed or replaced

authentik is an open-source Identity Provider. Prior to versions 2023.8.4 and 2023.10.2, when the default admin user has been deleted, it is potentially possible for an attacker to set the password of the default admin user without any authentication. authentik uses a blueprint to create the default admin user, which can also optionally set the default admin users' password from an environment variable. When the user is deleted, the `initial-setup` flow used to configure authentik after the first installation becomes available again. authentik 2023.8.4 and 2023.10.2 fix this issue. As a workaround, ensure the default admin user (Username `akadmin`) exists and has a password set. It is recommended to use a very strong password for this user, and store it in a secure location like a password manager. It is also possible to deactivate the user to prevent any logins as akadmin.

ONTAP Select Deploy administration utility versions 2.12 & 2.12.1 ship with an HTTP service bound to the network allowing unauthenticated remote attackers to perform administrative actions.

Authentication Bypass Using an Alternate Path or Channel vulnerability in MaanTheme MaanStore API allows Authentication Bypass.This issue affects MaanStore API: from n/a through 1.0.1.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Stacks Stacks Mobile App Builder stacks-mobile-app-builder allows Authentication Bypass.This issue affects Stacks Mobile App Builder: from n/a through 5.2.3.

A vulnerability is in the 'wx.html' page of the WAVLINK AC1200, version WAVLINK-A42W-1.27.6-20180418, which can allow a remote attacker to access this page without any authentication. When an unauthorized user accesses this page directly, it connects to this device as a friend of the device owner.

Sharp and Toshiba Tec MFPs improperly process HTTP authentication requests, resulting in an authentication bypass vulnerability.

Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions.

LightCMS v1.3.7 was discovered to contain a remote code execution (RCE) vulnerability via the image:make function.

Computing For Good's Basic Laboratory Information System (also known as C4G BLIS) version 3.5 and earlier suffers from an instance of CWE-284, "Improper Access Control." As a result, an unauthenticated user may alter several facets of a user account, including promoting any user to an administrator.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Yepas Digital Yepas allows Authentication Bypass.This issue affects Digital Yepas: before 1.0.1.

An unauthenticated remote attacker can execute OS commands via UDP on the device due to missing authentication.

Minio console is a graphical user interface for the for MinIO operator. Minio itself is a multi-cloud object storage project. Affected versions are subject to an authentication bypass issue in the Operator Console when an external IDP is enabled. All users on release v0.12.2 and before are affected and are advised to update to 0.12.3 or newer. Users unable to upgrade should add automountServiceAccountToken: false to the operator-console deployment in Kubernetes so no service account token will get mounted inside the pod, then disable the external identity provider authentication by unset the CONSOLE_IDP_URL, CONSOLE_IDP_CLIENT_ID, CONSOLE_IDP_SECRET and CONSOLE_IDP_CALLBACK environment variable and instead use the Kubernetes service account token.

ABB MicroSCADA Pro SYS600 version 9.3 suffers from an instance of CWE-306: Missing Authentication for Critical Function.

https://gitee.com/mingSoft/MCMS MCMS <=5.2.5 is affected by: RCE. The impact is: execute arbitrary code (remote). The attack vector is: ${"freemarker.template.utility.Execute"?new()("calc")}. ¶¶ MCMS has a pre-auth RCE vulnerability through which allows unauthenticated attacker with network access via http to compromise MCMS. Successful attacks of this vulnerability can result in takeover of MCMS.

In Apache APISIX Dashboard before 2.10.1, the Manager API uses two frameworks and introduces framework `droplet` on the basis of framework `gin`, all APIs and authentication middleware are developed based on framework `droplet`, but some API directly use the interface of framework `gin` thus bypassing the authentication.

Missing authentication for critical function vulnerability in UNIMO Technology digital video recorders (UDR-JA1004/JA1008/JA1016 firmware versions v1.0.20.13 and earlier, and UDR-JA1016 firmware versions v2.0.20.13 and earlier) allows a remote unauthenticated attacker to execute an arbitrary OS command by sending a specially crafted request to the affected device web interface.

AriaNg v0.1.0~v1.2.2 is affected by an incorrect access control vulnerability through not authenticating visitors' access rights.

HCL OneTest UI V9.5, V10.0, and V10.1 does not perform authentication for functionality that either requires a provable user identity or consumes a significant amount of resources.

Missing authentication for critical function in Visual Studio Code extension for Arduino allows an unauthenticated attacker to perform remote code execution through network attack vector.

An issue was discovered in the Responsive Poll through 1.3.4 for Wordpress. It allows an unauthenticated user to manipulate polls, e.g., delete, clone, or view a hidden poll. This is due to the usage of the callback wp_ajax_nopriv function in Includes/Total-Soft-Poll-Ajax.php for sensitive operations.

Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in.

The server permits communication without any authentication procedure, allowing the attacker to initiate a session with the server without providing any form of authentication.