Jiuzhou BCM93383WRG 139.4410mp1.3921132mp1.899.004404.004 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Jenkins ReadyAPI Functional Testing Plugin 1.11 and earlier does not mask SLM License Access Keys, client secrets, and passwords displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins VAddy Plugin 1.2.8 and earlier does not mask Vaddy API Auth Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins QMetry Test Management Plugin 1.13 and earlier does not mask Qmetry Automation API Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins Testsigma Test Plan run Plugin 1.6 and earlier does not mask Testsigma API keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

A vulnerability in the web-based management interface of Cisco AsyncOS software for Cisco Email Security Appliance (ESA), Cisco Content Security Management Appliance (SMA), and Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because an insecure method is used to mask certain passwords on the web-based management interface. An attacker could exploit this vulnerability by looking at the raw HTML code that is received from the interface. A successful exploit could allow the attacker to obtain some of the passwords configured throughout the interface.

In Hazelcast through 5.0.4, 5.1 through 5.1.6, and 5.2 through 5.2.3, configuration routines don't mask passwords in the member configuration properly. This allows Hazelcast Management Center users to view some of the secrets.

In several JetBrains IntelliJ IDEA versions, creating remote run configurations of JavaEE application servers leads to saving a cleartext record of the server credentials in the IDE configuration files. The issue has been fixed in the following versions: 2018.3.5, 2018.2.8, 2018.1.8.

In several versions of JetBrains IntelliJ IDEA Ultimate, creating Task Servers configurations leads to saving a cleartext unencrypted record of the server credentials in the IDE configuration files. The issue has been fixed in the following versions: 2019.1, 2018.3.5, 2018.2.8, and 2018.1.8.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. The application's configuration file contains parameters that represent passwords in cleartext.

Nortek Linear eMerge 50P/5000P devices have Default Credentials.

Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.

Linear eMerge E3-Series devices have Cleartext Credentials in a Database.

An issue was discovered in portier vision 4.4.4.2 and 4.4.4.6. Passwords are stored using reversible encryption rather than as a hash value, and the used Vigenere algorithm is badly outdated. Moreover, the encryption key is static and too short. Due to this, the passwords stored by the application can be easily decrypted.

Fuji Electric V-Server before 6.0.33.0 stores database credentials in project files as plaintext. An attacker that can gain access to the project file can recover the database credentials and gain access to the database server.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. Sensitive Credentials data is transmitted in cleartext.

A missing permission check in Jenkins Azure VM Agents Plugin 852.v8d35f0960a_43 and earlier allows attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins.

Jenkins Google Compute Engine Plugin 4.3.8 and earlier stores private keys unencrypted in cloud agent config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system.

Dynacolor FCM-MB40 v1.2.0.0 use /etc/appWeb/appweb.pass to store administrative web-interface credentials in cleartext. These credentials can be retrieved via cgi-bin/getuserinfo.cgi?mode=info.

LemonLDAP::NG -2.0.3 has Incorrect Access Control.

An issue was discovered in AUO Solar Data Recorder before 1.3.0. The web portal uses HTTP Basic Authentication and provides the account and password in the WWW-Authenticate attribute. By using this account and password, anyone can login successfully.

A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.

Jenkins Azure Event Grid Build Notifier Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

TeamPass version 2.1.27 and earlier contains a Storing Passwords in a Recoverable Format vulnerability in Shared password vaults that can result in all shared passwords are recoverable server side. This attack appears to be exploitable via any vulnerability that can bypass authentication or role assignment and can lead to shared password leakage.

In JetBrains TeamCity before 2024.07.3 password could be exposed via Sonar runner REST API

SickRage before v2018.03.09-1 includes cleartext credentials in HTTP responses.

Jenkins incapptic connect uploader Plugin 1.15 and earlier stores tokens unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system.

Echelon SmartServer 1 all versions, SmartServer 2 all versions prior to release 4.11.007, i.LON 100 all versions, and i.LON 600 all versions. The devices store passwords in plaintext, which may allow an attacker with access to the configuration file to log into the SmartServer web user interface.

If an attacker has access to the firmware from the VGo Robot (Versions 3.0.3.52164 and 3.0.3.53662. Prior versions may also be affected) they may be able to extract credentials.

In TotalAlert Web Application in BeaconMedaes Scroll Medical Air Systems prior to v4107600010.23, an attacker with network access to the integrated web server could retrieve default or user defined credentials stored and transmitted in an insecure manner.

D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

NETWAVE MNG6200 C4835805jrc12FU121413.cpr devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

A vulnerability was found in Portainer before 1.20.0. Portainer stores LDAP credentials, corresponding to a master password, in cleartext and allows their retrieval via API calls.

Kaonmedia CG2001-AN22A 1.2.1, CG2001-UDBNA 3.0.8, and CG2001-UN2NA 3.0.8 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Ubee DVW2108 6.28.1017 and DVW2110 6.28.2012 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

S-A WebSTAR DPC2100 v2.0.2r1256-060303 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Comtrend CM-6200un 123.447.007 and CM-6300n 123.553mp1.005 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Bnmux BCW700J 5.20.7, BCW710J 5.30.6a, and BCW710J2 5.30.16 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Technicolor TC7110.AR STD3.38.03 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.2863.205.10.1.30.4.1.14.1.3.32 and iso.3.6.1.4.1.2863.205.10.1.30.4.2.4.1.2.32 SNMP requests.

Technicolor DPC3928SL D3928SL-PSIP-13-A010-c3420r55105-170214a devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests.

Technicolor CWA0101 CWA0101E-A23E-c7000r5712-170315-SKC devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests.

Technicolor CGA0111 CGA0111E-ES-13-E23E-c8000r5712-170217-0829-TRU devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests.

Skyworth CM5100 V1.1.0, CM5100-440 V1.2.1, CM5100-511 4.1.0.14, CM5100-GHD00 V1.2.2, and CM5100.g2 4.1.0.17 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

iNovo Broadband IB-8120-W21 139.4410mp1.004200.002 and IB-8120-W21E1 139.4410mp1.3921132mp1.899.004404.004 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Zoom 5352 v5.5.8.6Y devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Technicolor TC7200.d1I TC7200.d1IE-N23E-c7000r5712-170406-HAT devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests.

mplus CBC383Z CBC383Z_mplus_MDr026 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

ZyXEL VMG3312-B10B 1.00(AAPP.7) devices have a backdoor root account with the tTn3+Z@!Sr0O+ password hash in the etc/default.cfg file.

Samsung SCX-6545X V2.00.03.01 03-23-2012 devices allows remote attackers to discover cleartext credentials via iso.3.6.1.4.1.236.11.5.11.81.10.1.5.0 and iso.3.6.1.4.1.236.11.5.11.81.10.1.6.0 SNMP requests.

An issue was discovered on Xiaomi Mi A1 tissot_sprout:8.1.0/OPM1.171019.026/V9.6.4.0.ODHMIFE devices. They store cleartext Wi-Fi passwords in logcat during the process of setting up the phone as a hotspot.