An issue was discovered in Libreswan 3.x and 4.x before 4.12. When an IKEv1 ISAKMP SA Informational Exchange packet contains a Delete/Notify payload followed by further Notifies that act on the ISAKMP SA, such as a duplicated Delete/Notify message, a NULL pointer dereference on the deleted state causes the pluto daemon to crash and restart.

The Libreswan Project was notified of an issue causing libreswan to restart when using IKEv1 without specifying an esp= line. When the peer requests AES-GMAC, libreswan's default proposal handler causes an assertion failure and crashes and restarts. IKEv2 connections are not affected.

An issue was discovered in Libreswan before 4.12. When an IKEv2 Child SA REKEY packet contains an invalid IPsec protocol ID number of 0 or 1, an error notify INVALID_SPI is sent back. The notify payload's protocol ID is copied from the incoming packet, but the code that verifies outgoing packets fails an assertion that the protocol ID must be ESP (2) or AH(3) and causes the pluto daemon to crash and restart. NOTE: the earliest affected version is 3.20.

Libreswan 4.9 allows remote attackers to cause a denial of service (assert failure and daemon restart) via crafted TS payload with an incorrect selector length.

libreswan before 3.18 allows remote attackers to cause a denial of service (NULL pointer dereference and pluto daemon restart).

In Libreswan 3.27 an assertion failure can lead to a pluto IKE daemon restart. An attacker can trigger a NULL pointer dereference by initiating an IKEv2 IKE_SA_INIT exchange, followed by a bogus INFORMATIONAL exchange instead of the normallly expected IKE_AUTH exchange. This affects send_v2N_spi_response_from_state() in programs/pluto/ikev2_send.c that will then trigger a NULL pointer dereference leading to a restart of libreswan.

Libreswan 4.2 through 4.5 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted IKEv1 packet because pluto/ikev1.c wrongly expects that a state object exists. This is fixed in 4.6.

A vulnerability, which was classified as problematic, was found in D-Link DIR-823X 240126/240802. This affects the function set_wifi_blacklists of the file /goform/set_wifi_blacklists of the component HTTP POST Request Handler. The manipulation of the argument macList leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Kubernetes CSI snapshot-controller prior to v2.1.3 and v3.0.2 could panic when processing a VolumeSnapshot custom resource when: - The VolumeSnapshot referenced a non-existing PersistentVolumeClaim and the VolumeSnapshot did not reference any VolumeSnapshotClass. - The snapshot-controller crashes, is automatically restarted by Kubernetes, and processes the same VolumeSnapshot custom resource after the restart, entering an endless crashloop. Only the volume snapshot feature is affected by this vulnerability. When exploited, users can’t take snapshots of their volumes or delete the snapshots. All other Kubernetes functionality is not affected.

Windows Lightweight Directory Access Protocol (LDAP) Denial of Service Vulnerability

In macrozheng mall-tiny 1.0.1, an attacker can send null data through the resource creation interface resulting in a null pointer dereference occurring in all subsequent operations that require authentication, which triggers a denial-of-service attack and service restart failure.

An attacker who successfully exploited these vulnerabilities could cause the robot to stop, make the robot controller inaccessible. The vulnerability could potentially be exploited to perform unauthorized actions by an attacker. This vulnerability arises under specific condition when specially crafted message is processed by the system. Below are reported vulnerabilities in the Robot Ware versions. * IRC5- RobotWare 6 < 6.15.06 except 6.10.10, and 6.13.07 * OmniCore- RobotWare 7 < 7.14

A flaw was found In 389-ds-base. When the Content Synchronization plugin is enabled, an authenticated user can reach a NULL pointer dereference using a specially crafted query. This flaw allows an authenticated attacker to cause a denial of service. This CVE is assigned against an incomplete fix of CVE-2021-3514.

A NULL pointer dereference, or possible use-after-free flaw was found in Samba AD LDAP server in versions before 4.10.17, before 4.11.11 and before 4.12.4. Although some versions of Samba shipped with Red Hat Enterprise Linux do not support Samba in AD mode, the affected code is shipped with the libldb package. This flaw allows an authenticated user to possibly trigger a use-after-free or NULL pointer dereference. The highest threat from this vulnerability is to system availability.

A vulnerability classified as problematic was found in Tenda FH451, FH1201, FH1202 and FH1206 up to 20241129. Affected by this vulnerability is the function websReadEvent of the file /goform/GetIPTV. The manipulation of the argument Content-Length leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda i9 1.0.0.8(3828) and classified as critical. This issue affects the function websReadEvent of the file /goform/GetIPTV. The manipulation leads to null pointer dereference. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda AC6, AC7, AC8, AC9, AC10, AC10U, AC15, AC18, AC500 and AC1206 up to 20241022. It has been rated as problematic. This issue affects the function websReadEvent of the file /goform/GetIPTV. The manipulation of the argument Content-Length leads to null pointer dereference. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in InspIRCd 2 before 2.0.28 and 3 before 3.3.0. The mysql module contains a NULL pointer dereference when built against mariadb-connector-c 3.0.5 or newer. When combined with the sqlauth or sqloper modules, this vulnerability can be used for remote crashing of an InspIRCd server by any user able to connect to a server.

In the Linux kernel, the following vulnerability has been resolved: nfsd: return -EINVAL when namelen is 0 When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen.

Null pointer dereference in Windows Local Security Authority (LSA) allows an authorized attacker to deny service over a network.

3S-Smart CODESYS SP Realtime NT before V2.3.7.28, CODESYS Runtime Toolkit 32 bit full before V2.4.7.54, and CODESYS PLCWinNT before V2.4.7.54 allow a NULL pointer dereference.

A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver, causing kernel panic and a denial of service.

In the __mdiff function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate big integers, however no check is performed to verify if the allocation succeeded or not. The access to _wds and _sign will trigger a null pointer dereference bug in case of a memory allocation failure.

In the __lshift function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access to b1 will trigger a null pointer dereference bug in case of a memory allocation failure.

A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper validation of user-supplied requests to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the device to stop responding, requiring manual intervention for recovery.

A flaw was found in the QEMU built-in VNC server while processing ClientCutText messages. The qemu_clipboard_request() function can be reached before vnc_server_cut_text_caps() was called and had the chance to initialize the clipboard peer, leading to a NULL pointer dereference. This could allow a malicious authenticated VNC client to crash QEMU and trigger a denial of service.

In the __multadd function of the newlib libc library, prior to versions 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. This will trigger a null pointer dereference bug in case of a memory allocation failure.

A NULL pointer dereference was found in the libvirt API responsible introduced in upstream version 3.10.0, and fixed in libvirt 6.0.0, for fetching a storage pool based on its target path. In more detail, this flaw affects storage pools created without a target path such as network-based pools like gluster and RBD. Unprivileged users with a read-only connection could abuse this flaw to crash the libvirt daemon, resulting in a potential denial of service.

In the __i2b function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access of _ x[0] will trigger a null pointer dereference bug in case of a memory allocation failure.

The _dtoa_r function of the newlib libc library, prior to version 3.3.0, performs multiple memory allocations without checking their return value. This could result in NULL pointer dereference.

The REENT_CHECK macro (see newlib/libc/include/sys/reent.h) as used by REENT_CHECK_TM, REENT_CHECK_MISC, REENT_CHECK_MP and other newlib macros in versions prior to 3.3.0, does not check for memory allocation problems when the DEBUG flag is unset (as is the case in production firmware builds).

In the __d2b function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. Accessing _x will trigger a null pointer dereference bug in case of a memory allocation failure.

A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver and causing kernel panic and a denial of service.

3S-Smart Software Solutions GmbH CODESYS V3 OPC UA Server, all versions 3.5.11.0 to 3.5.15.0, allows an attacker to send crafted requests from a trusted OPC UA client that cause a NULL pointer dereference, which may trigger a denial-of-service condition.

In removeUnusedPackagesLPw of PackageManagerService.java, there is a possible permanent denial-of-service due to a missing package dependency test. This could lead to remote denial of service with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-141413692

A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver, causing kernel panic and a denial of service.

The PKCS#7 parser in OpenVPN 3 Core Library versions through 3.8.3 did not properly validate the parsed data, which would result in the application crashing.

ImageMagick is free and open-source software used for editing and manipulating digital images. Versions 14.10.1 and below have a NULL pointer dereference vulnerability in the MSL (Magick Scripting Language) parser when processing <comment> tags before images are loaded. This can lead to DoS attack due to assertion failure (debug builds) or NULL pointer dereference (release builds). This issue is fixed in version 14.10.2.

VMware ESXi (6.7 before ESXi670-201806401-BG, 6.5 before ESXi650-201806401-BG, 6.0 before ESXi600-201806401-BG and 5.5 before ESXi550-201806401-BG), Workstation (14.x before 14.1.2), and Fusion (10.x before 10.1.2) contain a denial-of-service vulnerability due to NULL pointer dereference issue in RPC handler. Successful exploitation of this issue may allow attackers with normal user privileges to crash their VMs.

A vulnerability was found in D-Link DI-8400 16.07.26A1. It has been classified as problematic. This affects an unknown part of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument share_enable leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

In Octopus Deploy before 2019.10.6, an authenticated user with TeamEdit permission could send a malformed Team API request that bypasses input validation and causes an application level denial of service condition. (The fix for this was also backported to LTS 2019.9.8 and LTS 2019.6.14.)

Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy crashes when JWT authentication is configured with the remote JWKS fetching, allow_missing_or_failed is enabled, multiple JWT tokens are present in the request headers and the JWKS fetch fails. This is caused by a re-entry bug in the JwksFetcherImpl. When the first token's JWKS fetch fails, onJwksError() callback triggers processing of the second token, which calls fetch() again on the same fetcher object. The original callback's reset() then clears the second fetch's state (receiver_ and request_) which causes a crash when the async HTTP response arrives.

A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to launch a denial-of-service (DoS) attack via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later

Samba from version 4.0.0 and before versions 4.7.12, 4.8.7, 4.9.3 is vulnerable to a denial of service. During the processing of an LDAP search before Samba's AD DC returns the LDAP entries to the client, the entries are cached in a single memory object with a maximum size of 256MB. When this size is reached, the Samba process providing the LDAP service will follow the NULL pointer, terminating the process. There is no further vulnerability associated with this issue, merely a denial of service.

A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

Null pointer dereference in Windows Local Security Authority Subsystem Service (LSASS) allows an authorized attacker to deny service over a network.

A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5018 and later

A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later