Null pointer dereference in subsystem for Intel(R) AMT before versions 15.0.35 may allow an authenticated user to potentially enable denial of service via network access.

Wazuh is a free and open source platform used for threat prevention, detection, and response. A NULL pointer dereference was detected during fuzzing of the analysis engine, allowing malicious clients to DoS the analysis engine. The bug occurs when `analysisd` receives a syscollector message with the `hotfix` `msg_type` but lacking a `timestamp`. It uses `cJSON_GetObjectItem()` to get the `timestamp` object item and dereferences it without checking for a `NULL` value. A malicious client can DoS the analysis engine. This vulnerability is fixed in 4.7.1.

A Denial-of-Service (DoS) vulnerability was discovered in F-Secure Linux Security whereby the FSAVD component used in certain F-Secure products can crash while scanning larger packages/fuzzed files. The exploit can be triggered remotely by an attacker. A successful attack will result in Denial-of-Service (DoS) of the Anti-Virus engine.

ZNC 1.8.0 up to 1.8.1-rc1 allows authenticated users to trigger an application crash (with a NULL pointer dereference) if echo-message is not enabled and there is no network.

res_pjsip_t38 in Sangoma Asterisk 15.x before 15.7.4 and 16.x before 16.5.1 allows an attacker to trigger a crash by sending a declined stream in a response to a T.38 re-invite initiated by Asterisk. The crash occurs because of a NULL session media object dereference.

3S-Smart Software Solutions GmbH CODESYS V3 OPC UA Server, all versions 3.5.11.0 to 3.5.15.0, allows an attacker to send crafted requests from a trusted OPC UA client that cause a NULL pointer dereference, which may trigger a denial-of-service condition.

Nullptr dereference when a null char is present in a proto symbol. The symbol is parsed incorrectly, leading to an unchecked call into the proto file's name during generation of the resulting error message. Since the symbol is incorrectly parsed, the file is nullptr. We recommend upgrading to version 3.15.0 or greater.

A NULL pointer dereference, or possible use-after-free flaw was found in Samba AD LDAP server in versions before 4.10.17, before 4.11.11 and before 4.12.4. Although some versions of Samba shipped with Red Hat Enterprise Linux do not support Samba in AD mode, the affected code is shipped with the libldb package. This flaw allows an authenticated user to possibly trigger a use-after-free or NULL pointer dereference. The highest threat from this vulnerability is to system availability.

A NULL pointer dereference was found in the libvirt API responsible introduced in upstream version 3.10.0, and fixed in libvirt 6.0.0, for fetching a storage pool based on its target path. In more detail, this flaw affects storage pools created without a target path such as network-based pools like gluster and RBD. Unprivileged users with a read-only connection could abuse this flaw to crash the libvirt daemon, resulting in a potential denial of service.

In the __i2b function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access of _ x[0] will trigger a null pointer dereference bug in case of a memory allocation failure.

A null pointer dereference in FortiOS versions 7.4.0 through 7.4.1, 7.2.0 through 7.2.5, 7.0 all versions, 6.4 all versions , 6.2 all versions and 6.0 all versions allows attacker to trigger a denial of service via a crafted http request.

A null pointer dereference in FortiOS versions 7.4.0 through 7.4.1, 7.2.0 through 7.2.5, 7.0 all versions, 6.4 all versions , 6.2 all versions and 6.0 all versions allows attacker to trigger a denial of service via a crafted http request.

Kubernetes CSI snapshot-controller prior to v2.1.3 and v3.0.2 could panic when processing a VolumeSnapshot custom resource when: - The VolumeSnapshot referenced a non-existing PersistentVolumeClaim and the VolumeSnapshot did not reference any VolumeSnapshotClass. - The snapshot-controller crashes, is automatically restarted by Kubernetes, and processes the same VolumeSnapshot custom resource after the restart, entering an endless crashloop. Only the volume snapshot feature is affected by this vulnerability. When exploited, users can’t take snapshots of their volumes or delete the snapshots. All other Kubernetes functionality is not affected.

A vulnerability was found in D-Link DI-8400 16.07.26A1. It has been classified as problematic. This affects an unknown part of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument share_enable leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-only credentials can use a malformed OID in a `GET-NEXT` to the `nsVacmAccessTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range.

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can use a malformed OID in a `SET` request to `NET-SNMP-AGENT-MIB::nsLogTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range.

Amcrest cameras and NVR are vulnerable to a null pointer dereference over port 37777. An authenticated remote attacker can abuse this issue to crash the device.

Null pointer dereference in Windows Local Security Authority Subsystem Service (LSASS) allows an authorized attacker to deny service over a network.

Null pointer dereference in Windows Local Security Authority (LSA) allows an authorized attacker to deny service over a network.

Integer underflow in some Zoom Workplace Apps may allow an authenticated user to conduct a denial of service via network access.

Null pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.

NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.

NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.

NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.

Null pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.

In removeUnusedPackagesLPw of PackageManagerService.java, there is a possible permanent denial-of-service due to a missing package dependency test. This could lead to remote denial of service with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-141413692

An issue was discovered in OpenNDS Captive Portal before version 10.1.2. It has a NULL pointer dereference in preauthenticated() that can be triggered with a crafted GET HTTP request with a missing redirect query string parameter. Triggering this issue results in crashing OpenNDS (a Denial-of-Service condition). Affected OpenNDS Captive Portal before version 10.1.2 fixed infixed in OpenWrt master, OpenWrt 23.05 and OpenWrt 22.03 on28. August 2023 by updating OpenNDS to version 10.1.3.

A NULL pointer dereference was found in pkg/proxy/envoy/v2/debug.go getResourceVersion in Istio pilot before 1.5.0-alpha.0. If a particular HTTP GET request is made to the pilot API endpoint, it is possible to cause the Go runtime to panic (resulting in a denial of service to the istio-pilot application).

An issue was discovered in InspIRCd 2 before 2.0.28 and 3 before 3.3.0. The mysql module contains a NULL pointer dereference when built against mariadb-connector-c 3.0.5 or newer. When combined with the sqlauth or sqloper modules, this vulnerability can be used for remote crashing of an InspIRCd server by any user able to connect to a server.

3S-Smart CODESYS SP Realtime NT before V2.3.7.28, CODESYS Runtime Toolkit 32 bit full before V2.4.7.54, and CODESYS PLCWinNT before V2.4.7.54 allow a NULL pointer dereference.

In Octopus Deploy before 2019.10.6, an authenticated user with TeamEdit permission could send a malformed Team API request that bypasses input validation and causes an application level denial of service condition. (The fix for this was also backported to LTS 2019.9.8 and LTS 2019.6.14.)

A missing allocation check in sftp server processing read requests may cause a NULL dereference on low-memory conditions. The malicious client can request up to 4GB SFTP reads, causing allocation of up to 4GB buffers, which was not being checked for failure. This will likely crash the authenticated user's sftp server connection (if implemented as forking as recommended). For thread-based servers, this might also cause DoS for legitimate users. Given this code is not in any released versions, no security releases have been issued.

A null pointer dereference flaw was found in the Linux kernel's DECnet networking protocol. This issue could allow a remote user to crash the system.

A null pointer dereference in Fortinet FortiOS before 7.2.5 and before 7.0.11, FortiProxy before 7.2.3 and before 7.0.9 allows attacker to denial of sslvpn service via specifically crafted request in network parameter.

A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper validation of user-supplied requests to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the device to stop responding, requiring manual intervention for recovery.

The _dtoa_r function of the newlib libc library, prior to version 3.3.0, performs multiple memory allocations without checking their return value. This could result in NULL pointer dereference.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

In the __mdiff function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate big integers, however no check is performed to verify if the allocation succeeded or not. The access to _wds and _sign will trigger a null pointer dereference bug in case of a memory allocation failure.

A null pointer dereference in Fortinet FortiOS before 7.2.5, before 7.0.11 and before 6.4.13, FortiProxy before 7.2.4 and before 7.0.10 allows attacker to denial of sslvpn service via specifically crafted request in bookmark parameter.

In the __multadd function of the newlib libc library, prior to versions 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. This will trigger a null pointer dereference bug in case of a memory allocation failure.

A vulnerability, which was classified as problematic, was found in D-Link DIR-823X 240126/240802. This affects the function set_wifi_blacklists of the file /goform/set_wifi_blacklists of the component HTTP POST Request Handler. The manipulation of the argument macList leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

In the __lshift function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access to b1 will trigger a null pointer dereference bug in case of a memory allocation failure.

In the __multiply function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access of _x[0] will trigger a null pointer dereference bug in case of a memory allocation failure.

In the __d2b function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. Accessing _x will trigger a null pointer dereference bug in case of a memory allocation failure.

A flaw was found In 389-ds-base. When the Content Synchronization plugin is enabled, an authenticated user can reach a NULL pointer dereference using a specially crafted query. This flaw allows an authenticated attacker to cause a denial of service. This CVE is assigned against an incomplete fix of CVE-2021-3514.

In macrozheng mall-tiny 1.0.1, an attacker can send null data through the resource creation interface resulting in a null pointer dereference occurring in all subsequent operations that require authentication, which triggers a denial-of-service attack and service restart failure.

In the Linux kernel, the following vulnerability has been resolved: nfsd: return -EINVAL when namelen is 0 When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen.

The REENT_CHECK macro (see newlib/libc/include/sys/reent.h) as used by REENT_CHECK_TM, REENT_CHECK_MISC, REENT_CHECK_MP and other newlib macros in versions prior to 3.3.0, does not check for memory allocation problems when the DEBUG flag is unset (as is the case in production firmware builds).

VMware ESXi (6.7 before ESXi670-201806401-BG, 6.5 before ESXi650-201806401-BG, 6.0 before ESXi600-201806401-BG and 5.5 before ESXi550-201806401-BG), Workstation (14.x before 14.1.2), and Fusion (10.x before 10.1.2) contain a denial-of-service vulnerability due to NULL pointer dereference issue in RPC handler. Successful exploitation of this issue may allow attackers with normal user privileges to crash their VMs.

Tensorflow is an Open Source Machine Learning Framework. The implementation of `SparseTensorSliceDataset` has an undefined behavior: under certain condition it can be made to dereference a `nullptr` value. The 3 input arguments to `SparseTensorSliceDataset` represent a sparse tensor. However, there are some preconditions that these arguments must satisfy but these are not validated in the implementation. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.