Command injection is possible in ThinStation through 6.1.1 via shell metacharacters after the cgi-bin/CdControl.cgi action= substring, or after the cgi-bin/VolControl.cgi OK= substring.

In OpenWrt LuCI through 0.10, the endpoints admin/status/realtime/bandwidth_status and admin/status/realtime/wireless_status of the web application are affected by a command injection vulnerability.

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 3 of 6).

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 4 of 6).

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability.

Zeroshell 3.9.0 is prone to a remote command execution vulnerability. Specifically, this issue occurs because the web application mishandles a few HTTP parameters. An unauthenticated attacker can exploit this issue by injecting OS commands inside the vulnerable parameters.

Apcupsd 0.3.91_5, as used in pfSense through 2.4.4-RELEASE-p3 and other products, has an Arbitrary Command Execution issue in apcupsd_status.php.

A vulnerability in significant-gravitas/autogpt version 0.5.1 allows an attacker to bypass the shell commands denylist settings. The issue arises when the denylist is configured to block specific commands, such as 'whoami' and '/bin/whoami'. An attacker can circumvent this restriction by executing commands with a modified path, such as '/bin/./whoami', which is not recognized by the denylist.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function startRmtAssist in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

Citrix SD-WAN Center 10.2.x before 10.2.1 and NetScaler SD-WAN Center 10.0.x before 10.0.7 allow Command Injection.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function downloadFirmware in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

Voice Builder Prior to commit c145d4604df67e6fc625992412eef0bf9a85e26b and f6660e6d8f0d1d931359d591dbdec580fef36d36 is affected by: CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'). The impact is: Remote code execution with the same privileges as the servers. The component is: Two web servers in the projects expose three vulnerable endpoints that can be accessed remotely. The endpoints are defined at: - /tts: https://github.com/google/voice-builder/blob/3a449a3e8d5100ff323161c89b897f6d5ccdb6f9/merlin_model_server/api.js#L34 - /alignment: https://github.com/google/voice-builder/blob/3a449a3e8d5100ff323161c89b897f6d5ccdb6f9/festival_model_server/api.js#L28 - /tts: https://github.com/google/voice-builder/blob/3a449a3e8d5100ff323161c89b897f6d5ccdb6f9/festival_model_server/api.js#L65. The attack vector is: Attacker sends a GET request to the vulnerable endpoint with a specially formatted query parameter. The fixed version is: After commit f6660e6d8f0d1d931359d591dbdec580fef36d36.

utils/find-opencv.js in node-opencv (aka OpenCV bindings for Node.js) prior to 6.1.0 is vulnerable to Command Injection. It does not validate user input allowing attackers to execute arbitrary commands.

An issue was discovered in ClipBucket before 4.0.0 Release 4902. Any OS commands can be injected via shell metacharacters in the file_name parameter to /api/file_uploader.php or /actions/file_downloader.php.

A remote code execution issue was discovered in Zoho ManageEngine Applications Manager before 13.6 (build 13640). The publicly accessible testCredential.do endpoint takes multiple user inputs and validates supplied credentials by accessing a specified system. This endpoint calls several internal classes, and then executes a PowerShell script. If the specified system is OfficeSharePointServer, then the username and password parameters to this script are not validated, leading to Command Injection.

The MediaTek Embedded Multimedia Card (eMMC) subsystem for Android on MT65xx, MT66xx, and MT8163 SoC devices allows attackers to execute arbitrary commands as root via shell metacharacters in a filename under /data, because clear_emmc_nomedia_entry in platform/mt6577/external/meta/emmc/meta_clr_emmc.c invokes 'system("/system/bin/rm -r /data/' followed by this filename upon an eMMC clearance from a Meta Mode boot. NOTE: compromise of Fire OS on the Amazon Echo Dot would require a second hypothetical vulnerability that allows creation of the required file under /data.

The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).

An issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5. An attacker can exploit OS Command Injection in the filename parameter for remote code execution as root. This occurs in the Mainproc executable file, which can be run from the HTTPD web server.

A server auth command injection authentication bypass vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.3 and below could allow remote attackers to escalate privileges on vulnerable installations.

The Crestron Console service running on DGE-100, DM-DGE-200-C, and TS-1542-C devices with default configuration and running firmware versions 1.3384.00049.001 and lower are vulnerable to command injection that can be used to gain root-level access.

A Vulnerability in Brocade Network Advisor versions before 14.1.0 could allow a remote unauthenticated attacker to execute arbitray code. The vulnerability could also be exploited to execute arbitrary OS Commands.

Seagate Media Server in Seagate Personal Cloud has unauthenticated command injection in the uploadTelemetry and getLogs functions in views.py because .psp URLs are handled by the fastcgi.server component and shell metacharacters are mishandled.

Adobe Dreamweaver CC versions 18.0 and earlier have an OS Command Injection vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. The login form passes user input directly to a shell command without any kind of escaping or validation in /usr/share/www/check.lp file. An attacker is able to perform command injection using the "password" parameter in the login form.

The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability.

In the /HNAP1/SetClientInfoDemo message, the AudioMute and AudioEnable parameters are vulnerable, and the vulnerabilities affect D-Link DIR-868L Rev.B 2.05B02 devices. In the SetClientInfoDemo.php source code, the AudioMute and AudioEnble parameters are saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. It needs to bypass the wget command option with a single quote. A vulnerable /HNAP1/SetClientInfoDemo XML message could have single quotes and backquotes in the AudioMute or AudioEnable element, such as the '`telnetd`' string.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string.

Shell Metacharacter Injection in www/modules/save.php in FruityWifi (aka PatatasFritas/PatataWifi) through 2.4 allows remote attackers to execute arbitrary code with root privileges via a crafted mod_name parameter in a POST request. NOTE: unlike in CVE-2018-17317, the attacker does not need a valid session.

CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.480 has Command Injection via shell metacharacters in the admin/index.php service_start, service_restart, service_fullstatus, or service_stop parameter.

In Geutebrueck GmbH E2 Camera Series versions prior to 1.12.0.25 the DDNS configuration (in the Network Configuration panel) is vulnerable to an OS system command injection as root.

An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to execute arbitrary OS commands via the IPv4Address field.

An issue was discovered on Tenda AC9 V15.03.05.19(6318)_CN, AC15 V15.03.05.19_CN, and AC18 V15.03.05.19(6318)_CN devices. They allow remote code execution via shell metacharacters in the usbName field to the __fastcall function with a POST request.

Western Digital WD My Book Live and WD My Book Live Duo (all versions) have a root Remote Command Execution bug via shell metacharacters in the /api/1.0/rest/language_configuration language parameter. It can be triggered by anyone who knows the IP address of the affected device, as exploited in the wild in June 2021 for factory reset commands,

FruityWifi (aka PatatasFritas/PatataWifi) 2.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the io_mode, ap_mode, io_action, io_in_iface, io_in_set, io_in_ip, io_in_mask, io_in_gw, io_out_iface, io_out_set, io_out_mask, io_out_gw, iface, or domain parameter to /www/script/config_iface.php, or the newSSID, hostapd_secure, hostapd_wpa_passphrase, or supplicant_ssid parameter to /www/page_config.php.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/sylogapply route. This could lead to command injection via the syslogIp parameter after /goform/clearlog is invoked.

On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

nmap4j 1.1.0 allows attackers to execute arbitrary commands via shell metacharacters in an includeHosts call.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

OS Command Injection in GitHub repository gogs/gogs prior to 0.12.11.

A command injection vulnerability in libnmapp package for versions <0.4.16 allows arbitrary commands to be executed via arguments to the range options.

The test connection functionality in the NetAudit section of Opsview Monitor before 5.3.1 and 5.4.x before 5.4.2 is vulnerable to command injection due to improper sanitization of the rancid_password parameter.

A command Injection in ps package versions <1.0.0 for Node.js allowed arbitrary commands to be executed when attacker controls the PID.

LogonTracer 1.2.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

An issue was discovered on KONE Group Controller (KGC) devices before 4.6.5. Unauthenticated Remote Code Execution is possible through the open HTTP interface by modifying autoexec.bat, aka KONE-01.

RICOH Interactive Whiteboard D2200 V1.6 to V2.2, D5500 V1.6 to V2.2, D5510 V1.6 to V2.2, and the display versions with RICOH Interactive Whiteboard Controller Type1 V1.6 to V2.2 attached (D5520, D6500, D6510, D7500, D8400) allows remote attackers to execute arbitrary commands via unspecified vectors.

OS command injection in the AP mode settings feature in /cgi-bin/luci /api/misystem/set_router_wifiap on Xiaomi R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data.

System command injection in the /DroboAccess/delete_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.