An issue was discovered in Open Network Operating System (ONOS) 1.14. In the virtual broadband network gateway application (org.onosproject.virtualbng), the host event listener does not handle the following event types: HOST_MOVED, HOST_REMOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution.

A vulnerability in the call-handling functionality of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and 8800 Series could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete error handling when XML data within a SIP packet is parsed. An attacker could exploit this vulnerability by sending a SIP packet that contains a malicious XML payload to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition.

VP9 in libvpx before 1.13.1 mishandles widths, leading to a crash related to encoding.

An issue was discovered in Open Network Operating System (ONOS) 1.14. In the virtual tenant network application (org.onosproject.vtn), the host event listener does not handle the following event types: HOST_MOVED. In combination with other applications, this could lead to the absence of intended code execution.

quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames.

In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.

An uncaught exception issue discovered in Softing OPC UA C++ SDK before 6.30 for Windows operating system may cause the application to crash when the server wants to send an error packet, while socket is blocked on writing.

An error-handling flaw was found in python-ecdsa before version 0.13.3. During signature decoding, malformed DER signatures could raise unexpected exceptions (or no exceptions at all), which could lead to a denial of service.

When IPSec is configured on a Virtual Server, undisclosed traffic can cause TMM to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Insufficient Verification of Data Authenticity, Improper Handling of Exceptional Conditions vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Heartbeat sync loop, strategy processing modules) allows Protocol Manipulation. This vulnerability is associated with program files src/hbbs_http/sync.Rs and program routines stop-service handler in heartbeat loop. This issue affects RustDesk Client: through 1.4.5.

Volto is a React based frontend for the Plone Content Management System. In versions from 19.0.0-alpha.1 to before 19.0.0-alpha.4, 18.0.0 to before 18.24.0, 17.0.0 to before 17.22.1, and prior to 16.34.0, an anonymous user could cause the NodeJS server part of Volto to quit with an error when visiting a specific URL. The problem has been patched in versions 16.34.0, 17.22.1, 18.24.0, and 19.0.0-alpha.4. To mitigate downtime, have setup automatically restart processes that quit with an error.

Improper input validation in .NET Framework allows an unauthorized attacker to deny service over a network.

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based, unauthenticated attacker to cause Denial of Service (DoS). When a BGP UPDATE with malformed path attribute is received over an established BGP session, rpd crashes and restarts. Continuous receipt of a BGP UPDATE with a specifically malformed path attribute will create a sustained Denial of Service (DoS) condition for impacted devices. While this issue affects systems running 32-bit and 64-bit systems, the probability of impact on 64-bit system is extremely low.  According to KB25803 https://supportportal.juniper.net/s/article/Junos-How-to-check-if-Junos-OS-is-64-or-32-bit-on-a-router , customers can confirm 32-bit or 64-bit system via the ' show version detail ' command:      lab@router> show version detail| match 32      JUNOS 32-bit kernel Software Suite       lab@router> show version detail| match 64      JUNOS 64-bit kernel Software Suite  This issue affects:  Juniper Networks Junos OS:  * All versions before 21.4R3-S8,  * from 22.2 before 22.2R3-S4,  * from 22.4 before 22.4R3-S3,  * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R1-S2, 23.4R2.  Juniper Networks Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.4 before 22.4R3-S3-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

Unhandled exception in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable denial of service via network access.

A flaw was found in the Ceph RGW configuration with Beast as the front end handling client requests. An unauthenticated attacker could crash the Ceph RGW server by sending valid HTTP headers and terminating the connection, resulting in a remote denial of service for Ceph RGW clients.

In Mitsubishi Electric MELSEC-Q series Ethernet module QJ71E71-100 serial number 20121 and prior, an attacker could send crafted TCP packets against the FTP service, forcing the target devices to enter an error mode and cause a denial-of-service condition.

An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS on MX Series allows an unauthenticated network-based attacker to send specific packets to an Aggregated Multiservices (AMS) interface on the device, causing the packet forwarding engine (PFE) to crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue is only triggered by packets destined to a local-interface via a service-interface (AMS). AMS is only supported on the MS-MPC, MS-MIC, and MX-SPC3 cards. This issue is not experienced on other types of interfaces or configurations. Additionally, transit traffic does not trigger this issue. This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S12; 20.2 versions prior to 20.2R3-S8; 20.4 versions prior to 20.4R3-S7; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S5; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S2; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R2-S1, 22.3R3; 22.4 versions prior to 22.4R1-S2, 22.4R2.

In Apache Subversion versions up to and including 1.9.10, 1.10.4, 1.12.0, Subversion's svnserve server process may exit when a client sends certain sequences of protocol commands. This can lead to disruption for users of the server.

The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.

SSL-Proxy feature on SRX devices fails to handle a hardware resource limitation which can be exploited by remote SSL/TLS servers to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition. For this issue to occur, clients protected by the SRX device must initiate a connection to the malicious server. This issue affects: Juniper Networks Junos OS on SRX5000 Series: 12.3X48 versions prior to 12.3X48-D85; 15.1X49 versions prior to 15.1X49-D180; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S6, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to remotely crash the PI Message Subsystem of a PI Server, resulting in a denial-of-service condition.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause denial of service when an invalid private command parameter is sent to the controller over Modbus.

A CWE-248: Uncaught Exception vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum and Modicon Premium which could cause a possible Denial of Service due to improper data integrity check when sending files the controller over Modbus.

An issue was discovered on Samsung mobile devices with N(7.x) software. An attacker can cause a reboot because InputMethodManagerService has an unprotected system service. The Samsung ID is SVE-2017-9995 (January 2018).

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. Prior to 2.57.1, redirect, when called from inside the handle server hook with a location parameter containing characters that are invalid in a HTTP header, will cause an unhandled TypeError. This could result in DoS on some platforms, especially if the location passed to redirect contains unsanitized user input. This vulnerability is fixed in 2.57.1.

An issue was discovered on Samsung mobile devices with M(6.x) and N(7.x) software. Telecom has a System Crash via abnormal exception handling. The Samsung ID is SVE-2017-10906 (January 2018).

nimiq-primitives contains primitives (e.g., block, account, transaction) to be used in Nimiq's Rust implementation. Prior to version 1.3.0, an untrusted p2p peer can cause a node to panic by announcing an election macro block whose `validators` set contains an invalid compressed BLS voting key. Hashing an election macro header hashes `validators` and reaches `Validators::voting_keys()`, which calls `validator.voting_key.uncompress().unwrap()` and panics on invalid bytes. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available.

There is a denial of service vulnerability in some ZTE mobile internet products. Due to insufficient validation of Web interface parameter, an attacker could use the vulnerability to perform a denial of service attack.

On the affected platforms running EOS, a malformed DHCP packet might cause the DHCP relay agent to restart.

In wlan firmware, there is possible system crash due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07664720; Issue ID: ALPS07664720.

Meshtastic device firmware is a firmware for meshtastic devices to run an open source, off-grid, decentralized, mesh network built to run on affordable, low-power devices. Meshtastic device firmware is subject to a denial of serivce vulnerability in MQTT handling, fixed in version 2.4.1 of the Meshtastic firmware and on the Meshtastic public MQTT Broker. It's strongly suggested that all users of Meshtastic, particularly those that connect to a privately hosted MQTT server, update to this or a more recent stable version right away. There are no known workarounds for this vulnerability.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer that assists in deploying microservices. There is a potential vulnerability in Traefik managing HTTP/2 connections. A closing HTTP/2 server connection could hang forever because of a subsequent fatal error. This failure mode could be exploited to cause a denial of service. There has been a patch released in versions 2.8.8 and 2.9.0-rc5. There are currently no known workarounds.

An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service.

An assertion failure discovered in in check_certificate_request() in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers to cause a denial of service.

sys/netinet/tcp_timer.h in FreeBSD before 7.0 contains a denial-of-service (DoS) vulnerability due to improper handling of TSopt on TCP connections. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

detect-character-encoding is an open source character encoding inspection library. In detect-character-encoding v0.6.0 and earlier, data matching no charset causes the Node.js process to crash. The problem has been patched in [detect-character-encoding v0.7.0](https://github.com/sonicdoe/detect-character-encoding/releases/tag/v0.7.0). No workaround are available and all users should update to resolve this issue.

An Improper Handling of Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker sending a specific ICMP packet through a GRE tunnel to cause the PFE to crash and restart. When PowerMode IPsec (PMI) and GRE performance acceleration are enabled and the device receives a specific ICMP packet, a crash occurs in the SRX PFE, resulting in traffic loss. PMI is enabled by default, and GRE performance acceleration can be enabled by running the configuration command shown below. PMI is a mode of operation that provides IPsec performance improvements using Vector Packet Processing. Note that PMI with GRE performance acceleration is only supported on specific SRX platforms. This issue affects Junos OS on the SRX Series: * all versions before 21.4R3-S12,  * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S5,  * from 24.2 before 24.2R2-S3,  * from 24.4 before 24.4R2-S1,  * from 25.2 before 25.2R1-S1, 25.2R2.

ced detects character encoding using Google’s compact_enc_det library. In ced v0.1.0, passing data types other than `Buffer` causes the Node.js process to crash. The problem has been patched in ced v1.0.0. As a workaround, before passing an argument to ced, verify it’s a `Buffer` using `Buffer.isBuffer(obj)`.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to version 4.10.3, Parse Server crashes when if a query request contains an invalid value for the `explain` option. This is due to a bug in the MongoDB Node.js driver which throws an exception that Parse Server cannot catch. There is a patch for this issue in version 4.10.3. No workarounds aside from upgrading are known to exist.

React Router is a router for React. Starting in version 7.2.0 and prior to version 7.5.2, it is possible to force an application to switch to SPA mode by adding a header to the request. If the application uses SSR and is forced to switch to SPA, this causes an error that completely corrupts the page. If a cache system is in place, this allows the response containing the error to be cached, resulting in a cache poisoning that strongly impacts the availability of the application. This issue has been patched in version 7.5.2.

There is a Uncaught Exception vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to remote Denial of Service.

A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.

multiparty@4.2.3 and lower versions are vulnerable to denial of service via uncaught exception. By sending a multipart/form-data request with a Content-Disposition header whose filename* parameter contains a malformed percent-encoding, the parser invokes decodeURI on the value without try/catch. The resulting URIError propagates as an uncaught exception and crashes the process. Impact: any service accepting multipart uploads via multiparty is affected. Workarounds: none. Upgrade to multiparty@4.3.0 or higher.

In CODESYS V2 Runtime Toolkit 32 Bit full and PLCWinNT prior to versions V2.4.7.56 unauthenticated crafted invalid requests may result in several denial-of-service conditions. Running PLC programs may be stopped, memory may be leaked, or further communication clients may be blocked from accessing the PLC.

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition. Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset: BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list) Only systems with segment routing enabled are vulnerable to this issue. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session. This issue affects: Junos OS: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2-EVO before 22.2R3-S4-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S1-EVO, * from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO.

An improper handling of exceptional conditions vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to send specifically crafted traffic to a GlobalProtect interface that causes the service to stop responding. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.21; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h4; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h3; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8-h4; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers are not impacted by this issue.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.

An Improper Handling of Exceptional Conditions vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an attacker to inject a specific BGP update, causing the routing protocol daemon (RPD) to crash and restart, leading to a Denial of Service (DoS). Continued receipt and processing of the BGP update will create a sustained Denial of Service (DoS) condition. This issue affects very specific versions of Juniper Networks Junos OS: 19.3R3-S2; 19.4R3-S3; 20.2 versions 20.2R2-S3 and later, prior to 20.2R3-S2; 20.3 versions 20.3R2 and later, prior to 20.3R3; 20.4 versions 20.4R2 and later, prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS 20.1 is not affected by this issue. This issue also affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S3-EVO, 20.4R3-EVO; 21.1-EVO versions prior to 21.1R2-EVO; 21.2-EVO versions prior to 21.2R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specific BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects systems with BGP traceoptions enabled and requires a BGP session to be already established.  Systems without BGP traceoptions enabled are not affected by this issue. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability. This issue affects: Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S8,  * from 22.2 before 22.2R3-S4,  * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S3,  * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R2;  Junos OS Evolved:  * All versions before 21.2R3-S8-EVO,  * from 21.4-EVO before 21.4R3-S8-EVO,  * from 22.2-EVO before 22.2R3-S4-EVO,  * from 22.3-EVO before 22.3R3-S4-EVO, * from 22.4-EVO before 22.4R3-S3-EVO,  * from 23.2-EVO before 23.2R2-S1-EVO,  * from 23.4-EVO before 23.4R2-EVO.