In the Linux kernel, the following vulnerability has been resolved: macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done.

In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix use-after-free on disconnect In usb6fire_chip_abort(), the chip struct is allocated as the card's private data (via snd_card_new with sizeof(struct sfire_chip)). When snd_card_free_when_closed() is called and no file handles are open, the card and embedded chip are freed synchronously. The subsequent chip->card = NULL write then hits freed slab memory. Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ... hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953 Fix by moving the card lifecycle out of usb6fire_chip_abort() and into usb6fire_chip_disconnect(). The card pointer is saved in a local before any teardown, snd_card_disconnect() is called first to prevent new opens, URBs are aborted while chip is still valid, and snd_card_free_when_closed() is called last so chip is never accessed after the card may be freed.

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0

In the Linux kernel, the following vulnerability has been resolved: gpib: fix use-after-free in IO ioctl handlers The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor pointer after board->big_gpib_mutex has been released. A concurrent IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during this window, causing a use-after-free. The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly release big_gpib_mutex before calling their handler. wait_ioctl() is called with big_gpib_mutex held, but ibwait() releases it internally when wait_mask is non-zero. In all four cases, the descriptor pointer obtained from handle_to_descriptor() becomes unprotected. Fix this by introducing a kernel-only descriptor_busy reference count in struct gpib_descriptor. Each handler atomically increments descriptor_busy under file_priv->descriptors_mutex before releasing the lock, and decrements it when done. close_dev_ioctl() checks descriptor_busy under the same lock and rejects the close with -EBUSY if the count is non-zero. A reference count rather than a simple flag is necessary because multiple handlers can operate on the same descriptor concurrently (e.g. IBRD and IBWAIT on the same handle from different threads). A separate counter is needed because io_in_progress can be cleared from unprivileged userspace via the IBWAIT ioctl (through general_ibstatus() with set_mask containing CMPL), which would allow an attacker to bypass a check based solely on io_in_progress. The new descriptor_busy counter is only modified by the kernel IO paths. The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex) and the handlers only hold descriptors_mutex briefly during the lookup, so there is no deadlock risk and no impact on IO throughput.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed.

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL If we fail to copy the just created file descriptor to userland, we try to clean up by putting back 'fd' and freeing 'ib'. The code uses put_unused_fd() for the former which is wrong, as the file descriptor was already published by fd_install() which gets called internally by anon_inode_getfd(). This makes the error handling code leaving a half cleaned up file descriptor table around and a partially destructed 'file' object, allowing userland to play use-after-free tricks on us, by abusing the still usable fd and making the code operate on a dangling 'file->private_data' pointer. Instead of leaving the kernel in a partially corrupted state, don't attempt to explicitly clean up and leave this to the process exit path that'll release any still valid fds, including the one created by the previous call to anon_inode_getfd(). Simply return -EFAULT to indicate the error.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Prevent use after free on completion memory On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device.

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: move xa_alloc to prevent UAF Evil user can guess the next id of the vm before the ioctl completes and then call vm destroy ioctl to trigger UAF since create ioctl is still referencing the same vm. Move the xa_alloc all the way to the end to prevent this. v2: - Rebase (cherry picked from commit dcfd3971327f3ee92765154baebbaece833d3ca9)

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in async decryption Doing an async decryption (large read) crashes with a slab-use-after-free way down in the crypto API. Reproducer: # mount.cifs -o ...,seal,esize=1 //srv/share /mnt # dd if=/mnt/largefile of=/dev/null ... [ 194.196391] ================================================================== [ 194.196844] BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xc1/0x110 [ 194.197269] Read of size 8 at addr ffff888112bd0448 by task kworker/u77:2/899 [ 194.197707] [ 194.197818] CPU: 12 UID: 0 PID: 899 Comm: kworker/u77:2 Not tainted 6.11.0-lku-00028-gfca3ca14a17a-dirty #43 [ 194.198400] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 [ 194.199046] Workqueue: smb3decryptd smb2_decrypt_offload [cifs] [ 194.200032] Call Trace: [ 194.200191] <TASK> [ 194.200327] dump_stack_lvl+0x4e/0x70 [ 194.200558] ? gf128mul_4k_lle+0xc1/0x110 [ 194.200809] print_report+0x174/0x505 [ 194.201040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 194.201352] ? srso_return_thunk+0x5/0x5f [ 194.201604] ? __virt_addr_valid+0xdf/0x1c0 [ 194.201868] ? gf128mul_4k_lle+0xc1/0x110 [ 194.202128] kasan_report+0xc8/0x150 [ 194.202361] ? gf128mul_4k_lle+0xc1/0x110 [ 194.202616] gf128mul_4k_lle+0xc1/0x110 [ 194.202863] ghash_update+0x184/0x210 [ 194.203103] shash_ahash_update+0x184/0x2a0 [ 194.203377] ? __pfx_shash_ahash_update+0x10/0x10 [ 194.203651] ? srso_return_thunk+0x5/0x5f [ 194.203877] ? crypto_gcm_init_common+0x1ba/0x340 [ 194.204142] gcm_hash_assoc_remain_continue+0x10a/0x140 [ 194.204434] crypt_message+0xec1/0x10a0 [cifs] [ 194.206489] ? __pfx_crypt_message+0x10/0x10 [cifs] [ 194.208507] ? srso_return_thunk+0x5/0x5f [ 194.209205] ? srso_return_thunk+0x5/0x5f [ 194.209925] ? srso_return_thunk+0x5/0x5f [ 194.210443] ? srso_return_thunk+0x5/0x5f [ 194.211037] decrypt_raw_data+0x15f/0x250 [cifs] [ 194.212906] ? __pfx_decrypt_raw_data+0x10/0x10 [cifs] [ 194.214670] ? srso_return_thunk+0x5/0x5f [ 194.215193] smb2_decrypt_offload+0x12a/0x6c0 [cifs] This is because TFM is being used in parallel. Fix this by allocating a new AEAD TFM for async decryption, but keep the existing one for synchronous READ cases (similar to what is done in smb3_calc_signature()). Also remove the calls to aead_request_set_callback() and crypto_wait_req() since it's always going to be a synchronous operation.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync This checks if the ACL connection remains valid as it could be destroyed while hci_enhanced_setup_sync is pending on cmd_sync leading to the following trace: BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60 Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37 CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? hci_enhanced_setup_sync+0x91b/0xa60 print_report+0x152/0x4c0 ? hci_enhanced_setup_sync+0x91b/0xa60 ? __virt_addr_valid+0x1fa/0x420 ? hci_enhanced_setup_sync+0x91b/0xa60 kasan_report+0xda/0x1b0 ? hci_enhanced_setup_sync+0x91b/0xa60 hci_enhanced_setup_sync+0x91b/0xa60 ? __pfx_hci_enhanced_setup_sync+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x167/0x240 worker_thread+0x5b7/0xf60 ? __kthread_parkme+0xac/0x1c0 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x293/0x360 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 34: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __hci_conn_add+0x187/0x17d0 hci_connect_sco+0x2e1/0xb90 sco_sock_connect+0x2a2/0xb80 __sys_connect+0x227/0x2a0 __x64_sys_connect+0x6d/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 37: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x101/0x160 kfree+0xd0/0x250 device_release+0x9a/0x210 kobject_put+0x151/0x280 hci_conn_del+0x448/0xbf0 hci_abort_conn_sync+0x46f/0x980 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 worker_thread+0x5b7/0xf60 kthread+0x293/0x360 ret_from_fork+0x2f/0x70 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: deallocate damon_call() failure leaking damon_ctx damon_stat_start() always allocates the module's damon_ctx object (damon_stat_context). Meanwhile, if damon_call() in the function fails, the damon_ctx object is not deallocated. Hence, if the damon_call() is failed, and the user writes Y to “enabled” again, the previously allocated damon_ctx object is leaked. This cannot simply be fixed by deallocating the damon_ctx object when damon_call() fails. That's because damon_call() failure doesn't guarantee the kdamond main function, which accesses the damon_ctx object, is completely finished. In other words, if damon_stat_start() deallocates the damon_ctx object after damon_call() failure, the not-yet-terminated kdamond could access the freed memory (use-after-free). Fix the leak while avoiding the use-after-free by keeping returning damon_stat_start() without deallocating the damon_ctx object after damon_call() failure, but deallocating it when the function is invoked again and the kdamond is completely terminated. If the kdamond is not yet terminated, simply return -EAGAIN, as the kdamond will soon be terminated. The issue was discovered [1] by sashiko.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context.

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix a race in rxrpc_exit_net() Current code can lead to the following race: CPU0 CPU1 rxrpc_exit_net() rxrpc_peer_keepalive_worker() if (rxnet->live) rxnet->live = false; del_timer_sync(&rxnet->peer_keepalive_timer); timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay); cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_exit_net() exits while peer_keepalive_timer is still armed, leading to use-after-free. syzbot report was: ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0 WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0 R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __debug_check_no_obj_freed lib/debugobjects.c:992 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023 kfree+0xd6/0x310 mm/slab.c:3809 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176 ops_free_list net/core/net_namespace.c:174 [inline] cleanup_net+0x591/0xb00 net/core/net_namespace.c:598 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK>

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock.

In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix use-after-free on USB disconnect After powerz_disconnect() frees the URB and releases the mutex, a subsequent powerz_read() call can acquire the mutex and call powerz_read_data(), which dereferences the freed URB pointer. Fix by: - Setting priv->urb to NULL in powerz_disconnect() so that powerz_read_data() can detect the disconnected state. - Adding a !priv->urb check at the start of powerz_read_data() to return -ENODEV on a disconnected device. - Moving usb_set_intfdata() before hwmon registration so the disconnect handler can always find the priv pointer.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix trace_marker copy link list updates When the "copy_trace_marker" option is enabled for an instance, anything written into /sys/kernel/tracing/trace_marker is also copied into that instances buffer. When the option is set, that instance's trace_array descriptor is added to the marker_copies link list. This list is protected by RCU, as all iterations uses an RCU protected list traversal. When the instance is deleted, all the flags that were enabled are cleared. This also clears the copy_trace_marker flag and removes the trace_array descriptor from the list. The issue is after the flags are called, a direct call to update_marker_trace() is performed to clear the flag. This function returns true if the state of the flag changed and false otherwise. If it returns true here, synchronize_rcu() is called to make sure all readers see that its removed from the list. But since the flag was already cleared, the state does not change and the synchronization is never called, leaving a possible UAF bug. Move the clearing of all flags below the updating of the copy_trace_marker option which then makes sure the synchronization is performed. Also use the flag for checking the state in update_marker_trace() instead of looking at if the list is empty.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix UAF on iso_sock_timeout conn->sk maybe have been unlinked/freed while waiting for iso_conn_lock so this checks if the conn->sk is still valid by checking if it part of iso_sk_list.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3 Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c Patchwork: https://patchwork.freedesktop.org/patch/483255/ [DB: fixed Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: net: hsr: Fix potential use-after-free The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: Fix the error handling in cx23885_initdev() When the driver fails to call the dma_set_mask(), the driver will get the following splat: [ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50 This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask().

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix use-after-free bug for mm struct Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may represent the last reference held on the task mm. hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed before the final use in hfi1_release_user_pages(). A new task may allocate the mm structure while it is still being used, resulting in problems. One manifestation is corruption of the mmap_sem counter leading to a hang in down_write(). Another is corruption of an mm struct that is in use by another task.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/tracing: Fix a potential TP_printk UAF The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format") exposes potential UAFs in the xe_bo_move trace event. Fix those by avoiding dereferencing the xe_mem_type_to_name[] array at TP_printk time. Since some code refactoring has taken place, explicit backporting may be needed for kernels older than 6.10.

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix potential use-after-free in ravb_rx_gbeth() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid use-after-free in ip6_fragment() Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers. It seems to not be always true, at least for UDP stack. syzbot reported: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618 CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK> Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec n ---truncated---

In the Linux kernel, the following vulnerability has been resolved: lz4: fix LZ4_decompress_safe_partial read out of bound When partialDecoding, it is EOF if we've either filled the output buffer or can't proceed with reading an offset for following match. In some extreme corner cases when compressed data is suitably corrupted, UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial may lead to read out of bound problem during decoding. lz4 upstream has fixed it [2] and this issue has been disscussed here [3] before. current decompression routine was ported from lz4 v1.8.3, bumping lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd better fix it first. [1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/ [2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad# [3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/