Pexip Infinity 22.x through 24.x before 24.2 has Improper Input Validation for call setup. An unauthenticated remote attacker can trigger a software abort (temporary loss of service).

A flaw was found in knot-resolver before version 2.3.0. Malformed DNS messages may cause denial of service.

The MMS Interpreter of WagoAppRTU in versions below 1.4.6.0 which is used by the WAGO Telecontrol Configurator is vulnerable to malformed packets. An remote unauthenticated attacker could send specifically crafted packets that lead to a denial-of-service condition until restart of the affected device.

BigBlueButton is an open source web conferencing system. Versions starting with 2.2 and prior to 2.3.19, 2.4.7, and 2.5.0-beta.2 are vulnerable to regular expression denial of service (ReDoS) attacks. By using specific a RegularExpression, an attacker can cause denial of service for the bbb-html5 service. The useragent library performs checking of device by parsing the input of User-Agent header and lets it go through lookupUserAgent() (alias of useragent.lookup() ). This function handles input by regexing and attackers can abuse that by providing some ReDos payload using `SmartWatch`. The maintainers removed `htmlclient/useragent` from versions 2.3.19, 2.4.7, and 2.5.0-beta.2. As a workaround, disable NginX forwarding the requests to the handler according to the directions in the GitHub Security Advisory.

Improper Input Validation vulnerability in the handling of a malformed IEC 104 TCP packet in the Hitachi Energy MicroSCADA X SYS600, MicroSCADA Pro SYS600. Upon receiving a malformed IEC 104 TCP packet, the malformed packet is dropped, however the TCP connection is left open. This may cause a denial-of-service if the affected connection is left open. This issue affects: Hitachi Energy MicroSCADA Pro SYS600 version 9.4 FP2 Hotfix 4 and earlier versions Hitachi Energy MicroSCADA X SYS600 version 10 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.0:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.4:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*

A vulnerability exists in the Rockwell Automation controllers that allows a malformed CIP request to cause a major non-recoverable fault (MNRF) and a denial-of-service condition (DOS).

Improper input validation in the Intel(R) RAID Web Console 3 for Windows* may allow an unauthenticated user to potentially enable denial of service via network access.

python before versions 2.7.15, 3.4.9, 3.5.6rc1, 3.6.5rc1 and 3.7.0 is vulnerable to catastrophic backtracking in pop3lib's apop() method. An attacker could use this flaw to cause denial of service.

Insufficient validation in the IOCTL input/output buffer in AMD μProf may allow an attacker to bypass bounds checks potentially leading to a Windows kernel crash resulting in denial of service.

Palantir Gotham versions prior to 3.22.11.2 included an unauthenticated endpoint that would load portions of maliciously crafted zip files to memory. An attacker could repeatedly upload a malicious zip file, which would allow them to exhaust memory resources on the dispatch server.

Improper input validation in Citrix ADC and Citrix Gateway versions before 11.1-63.9 and 12.0-62.10 allows unauthenticated users to perform a denial of service attack.

nghttp2 version >= 1.10.0 and nghttp2 <= v1.31.0 contains an Improper Input Validation CWE-20 vulnerability in ALTSVC frame handling that can result in segmentation fault leading to denial of service. This attack appears to be exploitable via network client. This vulnerability appears to have been fixed in >= 1.31.1.

Palantir Gotham versions prior to 3.22.11.2 included an unauthenticated endpoint that would have allowed an attacker to exhaust the memory of the Gotham dispatch service.

An issue was discovered in the America's Army Proving Grounds platform for the Unreal Engine. With a false packet sent via UDP, the application server responds with several bytes, giving the possibility of DoS amplification, even being able to be used in DDoS attacks.

A vulnerability has been identified in SCALANCE W1788-1 M12 (All versions < V3.0.0), SCALANCE W1788-2 EEC M12 (All versions < V3.0.0), SCALANCE W1788-2 M12 (All versions < V3.0.0), SCALANCE W1788-2IA M12 (All versions < V3.0.0). Affected devices do not properly handle malformed Multicast LLC frames. This could allow an attacker to trigger a denial of service condition.

Dompdf is an HTML to PDF converter for PHP. When parsing SVG images Dompdf performs an initial validation to ensure that paths within the SVG are allowed. One of the validations is that the SVG document does not reference itself. However, prior to version 2.0.4, a recursive chained using two or more SVG documents is not correctly validated. Depending on the system configuration and attack pattern this could exhaust the memory available to the executing process and/or to the server itself. php-svg-lib, when run in isolation, does not support SVG references for `image` elements. However, when used in combination with Dompdf, php-svg-lib will process SVG images referenced by an `image` element. Dompdf currently includes validation to prevent self-referential `image` references, but a chained reference is not checked. A malicious actor may thus trigger infinite recursion by chaining references between two or more SVG images. When Dompdf parses a malicious payload, it will crash due after exceeding the allowed execution time or memory usage. An attacker sending multiple request to a system can potentially cause resource exhaustion to the point that the system is unable to handle incoming request. Version 2.0.4 contains a fix for this issue.

Improper Input Validation vulnerability in the handling of a specially crafted IEC 61850 packet with a valid data item but with incorrect data type in the IEC 61850 OPC Server in the Hitachi Energy MicroSCADA X SYS600, MicroSCADA Pro SYS600. The vulnerability may cause a denial-of-service on the IEC 61850 OPC Server part of the SYS600 product. This issue affects: Hitachi Energy MicroSCADA Pro SYS600 version 9.4 FP2 Hotfix 4 and earlier versions Hitachi Energy MicroSCADA X SYS600 version 10 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.0:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.4:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*

Pexip Infinity 27.x before 27.3 has Improper Input Validation. The client API allows remote attackers to trigger a software abort via a gateway call into Teams.

A vulnerability in the XCP Router service of the Cisco Unified Communications Manager IM & Presence Service (CUCM IM&P) and the Cisco TelePresence Video Communication Server (VCS) and Expressway could allow an unauthenticated, remote attacker to cause a temporary service outage for all IM&P users, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious IPv4 or IPv6 packet to an affected device on TCP port 7400. An exploit could allow the attacker to overread a buffer, resulting in a crash and restart of the XCP Router service. Cisco Bug IDs: CSCvg97663, CSCvi55947.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673.

A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029.

Improper connection handling in the base connection handler in IKTeam BearFTP before v0.3.1 allows a remote attacker to achieve denial of service via a Slowloris approach by sending a large volume of small packets.

An issue in Cesanta mjs 2.20.0 allows a remote attacker to cause a denial of service via the mjs_op_json_parse function in the msj.c file.

All versions of package lite-server are vulnerable to Denial of Service (DoS) when an attacker sends an HTTP request and includes control characters that the decodeURI() function is unable to parse.

A vulnerability in the implementation of Internet Key Exchange Version 1 (IKEv1) functionality in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific IKEv1 packets. An attacker could exploit this vulnerability by sending crafted IKEv1 packets to an affected device during an IKE negotiation. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuj73916.

OX App Suite through 7.10.3 has Improper Input Validation.

Improper Input Validation vulnerability in the cevakrnl.rv0 module as used in the Bitdefender Engines allows an attacker to trigger a denial of service while scanning a specially-crafted sample. This issue affects: Bitdefender Bitdefender Engines versions prior to 7.84063.

A vulnerability in the detection engine parsing of Security Socket Layer (SSL) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input handling of the SSL traffic. An attacker could exploit this vulnerability by sending a crafted SSL traffic to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. Cisco Bug IDs: CSCvi36434.

Vulnerability of input parameter verification in the motor module.Successful exploitation of this vulnerability may affect availability.

sflow decode package does not employ sufficient packet sanitisation which can lead to a denial of service attack. Attackers can craft malformed packets causing the process to consume large amounts of memory resulting in a denial of service.

Incorrect validation of user input in the role name parser may lead to use of uninitialized memory allowing an unauthenticated attacker to use a specially crafted request to cause a denial of service. This issue affects MongoDB Server v4.4 versions prior to 4.4.0-rc12; MongoDB Server v4.2 versions prior to 4.2.9.

A vulnerability exists in the HCI IEC 60870-5-104 function included in certain versions of the RTU500 series product. The vulnerability can only be exploited, if the HCI 60870-5-104 is configured with support for IEC 62351-5 and the CMU contains the license feature ‘Advanced security’ which must be ordered separately. If these preconditions are fulfilled, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a missing input data validation which eventually if exploited causes an internal buffer to overflow in the HCI IEC 60870-5-104 function.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the HTTP headers of incoming requests. This could allow an unauthenticated remote attacker to crash affected devices.

The package muhammara before 2.6.0; all versions of package hummus are vulnerable to Denial of Service (DoS) when PDFStreamForResponse() is used with invalid data.

Cube is a semantic layer for building data applications. Prior to version 0.34.34, it is possible to make the entire Cube API unavailable by submitting a specially crafted request to a Cube API endpoint. The issue has been patched in `v0.34.34` and it's recommended that all users exposing Cube APIs to the public internet upgrade to the latest version to prevent service disruption. There are currently no workaround for older versions, and the recommendation is to upgrade.

An issue in alanclarke URLite v.3.1.0 allows an attacker to cause a denial of service (DoS) via a crafted payload to the parsing function.

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The affected application allows IP configuration change without authentication to the device. This could allow an attacker to cause denial of service condition.

A flaw exists in Trading Technologies Messaging 7.1.28.3 (ttmd.exe) due to improper validation of user-supplied data when processing a type 8 message sent to default TCP RequestPort 10200. An unauthenticated, remote attacker can exploit this issue, via a specially crafted message, to terminate ttmd.exe.

TestingPlatform is a testing platform for Internet Security Standards. Prior to version 2.1.1, user input is not filtered correctly. Nmap options are accepted. In this particular case, the option to create log files is accepted in addition to a host name (and even without). A log file is created at the location specified. These files are created as root. If the file exists, the existing file is being rendered useless. This can result in denial of service. Additionally, input for scanning can be any CIDR blocks passed to nmap. An attacker can scan 0.0.0.0/0 or even local networks. Version 2.1.1 contains a patch for this issue.

Improper input validation in GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier allows remote attackers to cause a denial of service via unspecified vectors.

Dell iDRAC8 versions prior to 2.83.83.83 contain a denial of service vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability to cause resource exhaustion in the webserver, resulting in a denial of service condition.

A denial of service (DoS) vulnerability was discovered in go-git versions prior to v5.11. This vulnerability allows an attacker to perform denial of service attacks by providing specially crafted responses from a Git server which triggers resource exhaustion in go-git clients. Applications using only the in-memory filesystem supported by go-git are not affected by this vulnerability. This is a go-git implementation issue and does not affect the upstream git cli.

Improper input validation vulnerability in EC-CUBE versions from 3.0.5 to 3.0.18 allows a remote attacker to cause a denial-of-service (DoS) condition via unspecified vector.

uap-core before 0.7.3 is vulnerable to a denial of service attack when processing crafted User-Agent strings. Some regexes are vulnerable to regular expression denial of service (REDoS) due to overlapping capture groups. This allows remote attackers to overload a server by setting the User-Agent header in an HTTP(S) request to maliciously crafted long strings. This has been patched in uap-core 0.7.3.

In TensorFlow before 1.15.2 and 2.0.1, converting a string (from Python) to a tf.float16 value results in a segmentation fault in eager mode as the format checks for this use case are only in the graph mode. This issue can lead to denial of service in inference/training where a malicious attacker can send a data point which contains a string instead of a tf.float16 value. Similar effects can be obtained by manipulating saved models and checkpoints whereby replacing a scalar tf.float16 value with a scalar string will trigger this issue due to automatic conversions. This can be easily reproduced by tf.constant("hello", tf.float16), if eager execution is enabled. This issue is patched in TensorFlow 1.15.1 and 2.0.1 with this vulnerability patched. TensorFlow 2.1.0 was released after we fixed the issue, thus it is not affected. Users are encouraged to switch to TensorFlow 1.15.1, 2.0.1 or 2.1.0.

On BIG-IP version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.4, and all versions of 13.1.x and 12.1.x, when a message routing type virtual server is configured with both Diameter Session and Router Profiles, undisclosed traffic can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

The com.eypcnnapps.quickreboot (aka Eyuep Can Yilmaz {ROOT] Quick Reboot) application 1.0.8 for Android has exposed broadcast receivers for PowerOff, Reboot, and Recovery (e.g., com.eypcnnapps.quickreboot.widget.PowerOff) that are susceptible to unauthorized broadcasts because of missing input validation.

IBM Spectrum Protect 7.1 and 8.1 could allow an attacker to cause a denial of service due ti improper validation of user-supplied input. IBM X-Force ID: 183613.