** UNSUPPORTED WHEN ASSIGNED ** A vulnerability classified as critical has been found in D-Link DAR-7000 and DAR-8000 up to 20151231. Affected is an unknown function of the file /useratte/web.php. The manipulation of the argument file_upload leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-240246 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DAR-7000 up to 20151231 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /sysmanage/licence.php. The manipulation of the argument file_upload leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-240241 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability has been found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this vulnerability is the function formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DWR-M961 1.1.36 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formStaticDHCP of the component Authorization Interface. The manipulation of the argument Hostname leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.49 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000 up to 20151231. It has been classified as critical. This affects an unknown part of the file /sysmanage/updateos.php. The manipulation of the argument 1_file_upload leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-240243. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000 and DAR-8000 up to 20151231 and classified as critical. Affected by this issue is some unknown functionality of the file /sysmanage/updatelib.php. The manipulation of the argument file_upload leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-240242 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000 and DAR-8000 up to 20151231. It has been declared as critical. This vulnerability affects unknown code of the file /Tool/uploadfile.php. The manipulation of the argument file_upload leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-240244. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been classified as critical. This affects the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

An issue in D-Link DIR-842V2 v1.0.3 allows attackers to execute arbitrary commands via importing a crafted file.

D-Link DIR-842V2 v1.0.3 was discovered to contain a command injection vulnerability via the iperf3 diagnostics function.

An issue was discovered on D-Link DSR-250 3.17 devices. Insufficient validation of configuration file checksums could allow a remote, authenticated attacker to inject arbitrary crontab entries into saved configurations before uploading. These entries are executed as root.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

D-Link DSL-224 firmware version 3.0.10 allows post authentication command execution via an unspecified method.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formWlanGuestSetup.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the wan_connected parameter at /goform/formEasySetupWizard3.

An issue found in D-Link DSL-3782 v.1.03 and before allows remote authenticated users to execute arbitrary code as root via the Router IP Address fields of the network settings page.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formSetWanDhcpplus.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSchedule.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetWanDhcpplus.

An issue in DLINK DPH-400SE FRU 2.2.15.8 allows a remote attacker to escalate privileges via the User Modify function in the Maintenance/Access function component.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DSR-250 3.17 devices. Certain functionality in the Unified Services Router web interface could allow an authenticated attacker to execute arbitrary commands, due to a lack of validation of inputs provided in multipart HTTP POST requests.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L B1 2.06. Affected by this issue is the function formSetLog of the file /goform/formSetLog. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the /SetTriggerWPS/PIN parameter at function SetTriggerWPS.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.

The login page on D-Link DIR-615 T1 20.10 devices allows remote attackers to bypass the CAPTCHA protection mechanism and conduct brute-force attacks.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the IPAddress key.

Buffer Overflow vulnerability in D-Link DIR-605L, hardware version AX, firmware version 1.17beta and below, allows authorized attackers execute arbitrary code via sending crafted data to the webserver service program.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is a stack-based buffer overflow in the httpd binary. It allows an authenticated user to execute arbitrary code via a POST to ntp_sync.cgi with a sufficiently long parameter ntp_server.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.