Dell SmartFabric OS10 Software, versions 10.5.6.x, 10.5.5.x, 10.5.4.x, 10.5.3.x, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability leading to code execution.
A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 HF1). Affected applications are vulnerable to command injection due to missing server side input sanitation when loading VxLAN configurations. This could allow an authenticated attacker to execute arbitrary code with root privileges.
In ThreatQuotient ThreatQ before 5.29.3, authenticated users are able to execute arbitrary commands by sending a crafted request to an API endpoint.
On Mitel 6869i 4.5.0.41 devices, the Manual Firmware Update (upgrade.html) page does not perform sanitization on the username and path parameters (sent by an authenticated user) before appending flags to the busybox ftpget command. This leads to $() command execution.
Dell SmartFabric OS10 Software, version(s) 10.5.5.4 through 10.5.5.10 and 10.5.6.x , contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.
Improper neutralization of special elements used in a command ('Command Injection') vulnerability in task management component in Synology Download Station before 3.8.16-3566 allows remote authenticated users to execute arbitrary code via unspecified vectors.
China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.
A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.
An issue was discovered on Mitel 6869i through 4.5.0.41 and 5.x through 5.0.0.1018 devices. A command injection vulnerability exists in the hostname parameter taken in by the provis.html endpoint. The provis.html endpoint performs no sanitization on the hostname parameter (sent by an authenticated user), which is subsequently written to disk. During boot, the hostname parameter is executed as part of a series of shell commands. Attackers can achieve remote code execution in the root context by placing shell metacharacters in the hostname parameter.
In Bender/ebee Charge Controllers in multiple versions are prone to Command injection via Web interface. An authenticated attacker could enter shell commands into some input fields.
ScanCode.io is a server to script and automate software composition analysis with ScanPipe pipelines. Prior to version 32.5.1, the software has a possible command injection vulnerability in the docker fetch process as it allows to append malicious commands in the `docker_reference` parameter. In the function `scanpipe/pipes/fetch.py:fetch_docker_image` the parameter `docker_reference` is user controllable. The `docker_reference` variable is then passed to the vulnerable function `get_docker_image_platform`. However, the `get_docker_image_plaform` function constructs a shell command with the passed `docker_reference`. The `pipes.run_command` then executes the shell command without any prior sanitization, making the function vulnerable to command injections. A malicious user who is able to create or add inputs to a project can inject commands. Although the command injections are blind and the user will not receive direct feedback without logs, it is still possible to cause damage to the server/container. The vulnerability appears for example if a malicious user adds a semicolon after the input of `docker://;`, it would allow appending malicious commands. Version 32.5.1 contains a patch for this issue. The `docker_reference` input should be sanitized to avoid command injections and, as a workaround, one may avoid creating commands with user controlled input directly.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Gerapy is a distributed crawler management framework. Prior to version 0.9.9, an authenticated user could execute arbitrary commands. This issue is fixed in version 0.9.9. There are no known workarounds.
The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/usb_restore_Form?script/.
Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.1, 4000 Assistant V10 R0, 4000 Manager V10 R1 before V10 R1.42.1, and 4000 Manager V10 R0 allow Authenticated Command Injection via AShbr. This is also known as OSFOURK-24039.
An issue in ZenTao Community Edition v.18.6 and before, ZenTao Biz v.8.6 and before, ZenTao Max v.4.7 and before allows an attacker to execute arbitrary code via a crafted script to the Office Conversion Settings function.
The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/.
Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access, via dtb pages of the platform portal. This is also known as OSFOURK-23719.
A command injection vulnerability has been reported to affect certain versions of Video Station. If exploited, this vulnerability allows remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Video Station versions prior to 5.5.4 on QTS 4.5.2; versions prior to 5.5.4 on QuTS hero h4.5.2; versions prior to 5.5.4 on QuTScloud c4.5.4. This issue does not affect: QNAP Systems Inc. Video Station on QTS 4.3.6; on QTS 4.3.3.
Tenda AC7V1.0 v15.03.06.44 firmware contains a command injection vulnerablility in formexeCommand function via the cmdinput parameter.
IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.
A vulnerability has been found in Tenda FH1205 2.0.0.7(775) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258295. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
An issue found in D-Link DSL-3782 v.1.03 and before allows remote authenticated users to execute arbitrary code as root via the Router IP Address fields of the network settings page.
A vulnerability has been found in Tenda FH1202 1.2.0.14(408) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258151. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
Dell vApp Manager, versions prior to 9.2.4.9 contain a Command Injection Vulnerability. An authorized attacker could potentially exploit this vulnerability leading to an execution of an inserted command. Dell recommends customers to upgrade at the earliest opportunity.
Command Injection vulnerability discovered in 4ipnet EAP-767 device v3.42.00 within the web interface of the device allows attackers with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges.
A command injection vulnerability exists in the 'SaveStaticRouteIPv4Params' parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.
A command injection vulnerability exists in the ‘SaveSysLogParams’ parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.
Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability through an url parameter of an authenticated enpoint in Enphase IQ Gateway (formerly known as Envoy) allows OS Command Injection.This issue affects Envoy: from 4.x to 8.x and < 8.2.4225.
Vinchin Backup & Recovery v7.2 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the deleteUpdateAPK function.
Discord-Recon is a Discord bot created to automate bug bounty recon, automated scans and information gathering via a discord server. Discord-Recon is vulnerable to remote code execution. An attacker is able to execute shell commands in the server without having an admin role. This vulnerability has been fixed in version 0.0.8.
Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.
The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device.
Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.
FusionCompute 8.0.0 have a command injection vulnerability. The software does not sufficiently validate certain parameters post from user, successful exploit could allow an authenticated attacker to launch a command injection attack.
We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.
TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds NAPT rules after authentication, and the rule name has an injection point.
A vulnerability, which was classified as critical, has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected by this issue is some unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
The `add_llm` function in `llm_app.py` in infiniflow/ragflow version 0.11.0 contains a remote code execution (RCE) vulnerability. The function uses user-supplied input `req['llm_factory']` and `req['llm_name']` to dynamically instantiate classes from various model dictionaries. This approach allows an attacker to potentially execute arbitrary code due to the lack of comprehensive input validation or sanitization. An attacker could provide a malicious value for 'llm_factory' that, when used as an index to these model dictionaries, results in the execution of arbitrary code.
TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds ACL rules after authentication, and the rule name parameter has injection points.
Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.
Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.
A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
An attacker with access to a Management Console user account with the editor role could escalate privileges through a command injection vulnerability in the Management Console. This vulnerability affected all versions of GitHub Enterprise Server and was fixed in versions 3.11.3, 3.10.5, 3.9.8, and 3.8.13 This vulnerability was reported via the GitHub Bug Bounty program.
A condition exists in FlashArray and FlashBlade Purity whereby a malicious user could execute arbitrary commands remotely through a specifically crafted SNMP configuration.
In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.