D-Link devices DAP-2310 v2.10rc036 and earlier, DAP-2330 v1.06rc020 and earlier, DAP-2360 v2.10rc050 and earlier, DAP-2553 v3.10rc031 and earlier, DAP-2660 v1.15rc093 and earlier, DAP-2690 v3.20rc106 and earlier, DAP-2695 v1.20rc119_beta31 and earlier, DAP-3320 v1.05rc027 beta and earlier, DAP-3662 v1.05rc047 and earlier allows attackers to cause a Denial of Service (DoS) via uploading a crafted firmware after modifying the firmware header.

D-link DIR-816 A2_v1.10CNB04.img reboots the router without authentication via /goform/doReboot. No authentication is required, and reboot is executed when the function returns at the end.

D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.

D-Link DIR820LA1_FW106B02 was discovered to contain a buffer overflow via the nextPage parameter at ping.ccp.

A vulnerability classified as critical was found in D-Link DI-7003GV2 24.04.18D1 R(68125). This vulnerability affects the function sub_4983B0 of the file /H5/backup.asp?opt=reset of the component Factory Reset Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_config function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the content in upload_file variable is NULL in the upload_config function then the strncasecmp would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null pointer dereference vulnerability in D-Link DAP-2310 2,10RC039, DAP-2330 1.10RC036 BETA, DAP-2360 2.10RC055, DAP-2553 3.10rc039 BETA, DAP-2660 1.15rc131b, DAP-2690 3.20RC115 BETA, DAP-2695 1.20RC093, DAP-3320 1.05RC027 BETA and DAP-3662 1.05rc069 in the sbin/httpd binary. The crash happens at the `atoi' operation when a specific network package are sent to the httpd binary.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_certificate function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the strrchr in the upload_certificate function would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi

In D-link DIR-816 A2_v1.10CNB04.img,the network can be reset without authentication via /goform/setMAC.

Null Pointer Dereference vulnerability exists in D-Link DSL-2740R UK_1.01, which could let a remove malicious user cause a denial of service via the send_hnap_unauthorized function. It could be triggered by sending crafted POST request to /HNAP1/. NOTE: The DSL-2740R and all hardware revisions are considered End of Life and as such this issue will not be patched

A hard-coded password vulnerability exists in the Zebra IP Routing Manager functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to a denial of service. An attacker can send a sequence of requests to trigger this vulnerability.

D-link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img is vulnerable to Buffer Overflow via /goform/addRouting.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_800462c4 in /formAdvFirewall. This vulnerability is triggered via a crafted POST request.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualServ. This vulnerability is triggered via a crafted POST request.

D-Link DIR-3040 prog.cgi SetUsersSettings Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21654.

D-Link DIR878 1.30B08 was discovered to contain a stack overflow in the sub_478360 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR878 1.30B08 was discovered to contain a stack overflow in the sub_498308 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been declared as critical. This vulnerability affects the function QoSPortSetup of the file /goform/QoSPortSetup. The manipulation of the argument port0_group/port0_remarker/ssid0_group/ssid0_remarker leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSchedule.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetWanDhcpplus.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the addurlfilter parameter in /goform/websURLFilter.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the MAC parameter in /goform/editassignment.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the lanip parameter in /goform/setNetworkLan.

The LAN-side Web-Configuration Interface has Stack-based Buffer Overflow vulnerability in the D-Link Wi-Fi router firmware DIR-890L DIR890LA1_FW107b09.bin and previous versions. The function created at 0x17958 of /htdocs/cgibin will call sprintf without checking the length of strings in parameters given by HTTP header and can be controlled by users easily. The attackers can exploit the vulnerability to carry out arbitrary code by means of sending a specially constructed payload to port 49152.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the proto parameter in /goform/form2IPQoSTcAdd.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the addhostfilter parameter in /goform/websHostFilter.

D-Link DAP-1330_OSS-firmware_1.00b21 was discovered to contain a stack overflow via the function checkvalidupgrade.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the config.smtp_email_subject parameter at /goform/formSetEmail.

D-Link DIR-859 v1.05 was discovered to contain a stack-based buffer overflow via the function genacgi_main. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted payload.

D-Link G416 httpd API-AUTH Digest Processing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21662.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_475FB0 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formSetWanDhcpplus.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_48AF78 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. Within the handler function of the /goform/DDNS route, a very long password could lead to a stack-based buffer overflow and overwrite the return address.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. A very long password to /goform/formLogin could lead to a stack-based buffer overflow and overwrite the return address.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetACLFilter.

D-Link DAP-2622 DDP Set SSID List PSK Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20101.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the urladd parameter in /goform/websURLFilterAddDel.

D-Link DAP-2622 DDP Set IPv6 Address Primary DNS Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20095.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. The function do_cgi(), which processes cgi requests supplied to the device's web servers, is vulnerable to a remotely exploitable stack-based buffer overflow. Unauthenticated exploitation is possible by combining this vulnerability with CVE-2020-9277.

D-Link DAP-1330_OSS-firmware_1.00b21 was discovered to contain a heap overflow via the devicename parameter in /goform/setDeviceSettings.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the IPADDR and nvmacaddr parameters in /goform/form2Dhcpip.

fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup_Wizard webpage parameter when f_radius_ip1 is malformed.

A stack-based buffer overflow was found on the D-Link DIR-842 REVC with firmware v3.13B09 HOTFIX due to the use of strcpy for LOGINPASSWORD when handling a POST request to the /MTFWU endpoint.

A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.