In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix SCSI I/O completion and abort handler deadlock During stress I/O tests with 500+ vports, hard LOCKUP call traces are observed. CPU A: native_queued_spin_lock_slowpath+0x192 _raw_spin_lock_irqsave+0x32 lpfc_handle_fcp_err+0x4c6 lpfc_fcp_io_cmd_wqe_cmpl+0x964 lpfc_sli4_fp_handle_cqe+0x266 __lpfc_sli4_process_cq+0x105 __lpfc_sli4_hba_process_cq+0x3c lpfc_cq_poll_hdler+0x16 irq_poll_softirq+0x76 __softirqentry_text_start+0xe4 irq_exit+0xf7 do_IRQ+0x7f CPU B: native_queued_spin_lock_slowpath+0x5b _raw_spin_lock+0x1c lpfc_abort_handler+0x13e scmd_eh_abort_handler+0x85 process_one_work+0x1a7 worker_thread+0x30 kthread+0x112 ret_from_fork+0x1f Diagram of lockup: CPUA CPUB ---- ---- lpfc_cmd->buf_lock phba->hbalock lpfc_cmd->buf_lock phba->hbalock Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock first before phba->hbalock.

In the Linux kernel, the following vulnerability has been resolved: drbd: only clone bio if we have a backing device Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case.

In the Linux kernel, the following vulnerability has been resolved: clk: tegra: Fix refcount leak in tegra210_clock_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add a check for attr_names and oatbl Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix memory leak in _samsung_clk_register_pll() If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: ensure the fw_info is not null before using it This resolves the dereference null return value warning reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly When an extended state component is not present in fpstate, but in init state, the function copies from init_fpstate via copy_feature(). But, dynamic states are not present in init_fpstate because of all-zeros init states. Then retrieving them from init_fpstate will explode like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:memcpy_erms+0x6/0x10 ? __copy_xstate_to_uabi_buf+0x381/0x870 fpu_copy_guest_fpstate_to_uabi+0x28/0x80 kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm] ? __this_cpu_preempt_check+0x13/0x20 ? vmx_vcpu_put+0x2e/0x260 [kvm_intel] kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? __fget_light+0xd4/0x130 __x64_sys_ioctl+0xe3/0x910 ? debug_smp_processor_id+0x17/0x20 ? fpregs_assert_state_consistent+0x27/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Adjust the 'mask' to zero out the userspace buffer for the features that are not available both from fpstate and from init_fpstate. The dynamic features depend on the compacted XSAVE format. Ensure it is enabled before reading XCOMP_BV in init_fpstate.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix size validation for non-exclusive domains (v4) Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the requested memory exists, else we get a kernel oops when dereferencing "man". v2: Make the patch standalone, i.e. not dependent on local patches. v3: Preserve old behaviour and just check that the manager pointer is not NULL. v4: Complain if GTT domain requested and it is uninitialized--most likely a bug.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix XDP program unloading while removing the driver The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate the box size for the snooped cursor Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor.

In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: fix crash on ZONE_DEVICE Not all pages may apply to pgtable check. One example is ZONE_DEVICE pages: they map PFNs directly, and they don't allocate page_ext at all even if there's struct page around. One may reference devm_memremap_pages(). When both ZONE_DEVICE and page-table-check enabled, then try to map some dax memories, one can trigger kernel bug constantly now when the kernel was trying to inject some pfn maps on the dax device: kernel BUG at mm/page_table_check.c:55! While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page fault resolutions, skip all the checks if page_ext doesn't even exist in pgtable checker, which applies to ZONE_DEVICE but maybe more.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix null-ptr-deref in ext4_write_info I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping() Our syzkaller report a null pointer dereference, root cause is following: __blk_mq_alloc_map_and_rqs set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs blk_mq_alloc_map_and_rqs blk_mq_alloc_rqs // failed due to oom alloc_pages_node // set->tags[hctx_idx] is still NULL blk_mq_free_rqs drv_tags = set->tags[hctx_idx]; // null pointer dereference is triggered blk_mq_clear_rq_mapping(drv_tags, ...) This is because commit 63064be150e4 ("blk-mq: Add blk_mq_alloc_map_and_rqs()") merged the two steps: 1) set->tags[hctx_idx] = blk_mq_alloc_rq_map() 2) blk_mq_alloc_rqs(..., set->tags[hctx_idx]) into one step: set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs() Since tags is not initialized yet in this case, fix the problem by checking if tags is NULL pointer in blk_mq_clear_rq_mapping().

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix PM runtime leakage in am65_cpsw_nuss_ndo_slave_open() Ensure pm_runtime_put() is issued in error path.

In the Linux kernel, the following vulnerability has been resolved: x86/coco: Require seeding RNG with RDRAND on CoCo systems There are few uses of CoCo that don't rely on working cryptography and hence a working RNG. Unfortunately, the CoCo threat model means that the VM host cannot be trusted and may actively work against guests to extract secrets or manipulate computation. Since a malicious host can modify or observe nearly all inputs to guests, the only remaining source of entropy for CoCo guests is RDRAND. If RDRAND is broken -- due to CPU hardware fault -- the RNG as a whole is meant to gracefully continue on gathering entropy from other sources, but since there aren't other sources on CoCo, this is catastrophic. This is mostly a concern at boot time when initially seeding the RNG, as after that the consequences of a broken RDRAND are much more theoretical. So, try at boot to seed the RNG using 256 bits of RDRAND output. If this fails, panic(). This will also trigger if the system is booted without RDRAND, as RDRAND is essential for a safe CoCo boot. Add this deliberately to be "just a CoCo x86 driver feature" and not part of the RNG itself. Many device drivers and platforms have some desire to contribute something to the RNG, and add_device_randomness() is specifically meant for this purpose. Any driver can call it with seed data of any quality, or even garbage quality, and it can only possibly make the quality of the RNG better or have no effect, but can never make it worse. Rather than trying to build something into the core of the RNG, consider the particular CoCo issue just a CoCo issue, and therefore separate it all out into driver (well, arch/platform) code. [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: VMCI: Use threaded irqs instead of tasklets The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: regulator: da9121: Fix uninit-value in da9121_assign_chip_model() KASAN report slab-out-of-bounds in __regmap_init as follows: BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841 Read of size 1 at addr ffff88803678cdf1 by task xrun/9137 CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88 print_report.cold+0xcd/0x69b mm/kasan/report.c:313 kasan_report+0x8e/0xc0 mm/kasan/report.c:491 __regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841 __devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266 __devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394 da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039 i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563 This happend when da9121 device is probe by da9121_i2c_id, but with invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later da9121_assign_chip_model() will access 'regmap' without init it. Fix it by return -EINVAL from da9121_assign_chip_model() if 'chip->subvariant_id' is invalid.

In the Linux kernel, the following vulnerability has been resolved: mips: bmips: BCM6358: make sure CBR is correctly set It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix NULL-pointer dereferences There are several places where we can crash the kernel by requesting lines, unbinding the GPIO device, then calling any of the system calls relevant to the GPIO character device's annonymous file descriptors: ioctl(), read(), poll(). While I observed it with the GPIO simulator, it will also happen for any of the GPIO devices that can be hot-unplugged - for instance any HID GPIO expander (e.g. CP2112). This affects both v1 and v2 uAPI. This fixes it partially by checking if gdev->chip is not NULL but it doesn't entirely remedy the situation as we still have a race condition in which another thread can remove the device after the check.

In the Linux kernel, the following vulnerability has been resolved: mm/uffd: fix warning without PTE_MARKER_UFFD_WP compiled in When PTE_MARKER_UFFD_WP not configured, it's still possible to reach pte marker code and trigger an warning. Add a few CONFIG_PTE_MARKER_UFFD_WP ifdefs to make sure the code won't be reached when not compiled in.

In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Lock port->lock when calling uart_handle_cts_change() uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100] RIP: 0010:uart_handle_cts_change+0xa6/0xb0 ... max3100_handlerx+0xc5/0x110 [max3100] max3100_work+0x12a/0x340 [max3100]

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to lpfc_nlp_put() with a null pointer to a nodelist structure. Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon entry.

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE) Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot: BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags)); Return -EINVAL early if COW mapping is detected. This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example: void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0;

In the Linux kernel, the following vulnerability has been resolved: iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() The fsl_pamu_probe() returns directly when create_csd() failed, leaving irq and memories unreleased. Fix by jumping to error if create_csd() returns error.

In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Fix TLBI RANGE operand KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty pages are collected by VMM and the page table entries become write protected during live migration. Unfortunately, the operand passed to the TLBI RANGE instruction isn't correctly sorted out due to the commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()"). It leads to crash on the destination VM after live migration because TLBs aren't flushed completely and some of the dirty pages are missed. For example, I have a VM where 8GB memory is assigned, starting from 0x40000000 (1GB). Note that the host has 4KB as the base page size. In the middile of migration, kvm_tlb_flush_vmid_range() is executed to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to __kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3 and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop in the __flush_tlb_range_op() until the variable @scale underflows and becomes -9, 0xffff708000040000 is set as the operand. The operand is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to invalid @scale and @num. Fix it by extending __TLBI_RANGE_NUM() to support the combination of SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can be returned from the macro, meaning the TLBs for 0x200000 pages in the above example can be flushed in one shoot with SCALE#3 and NUM#31. The macro TLBI_RANGE_MASK is dropped since no one uses it any more. The comments are also adjusted accordingly.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential memory leak in ext4_fc_record_regions() As krealloc may return NULL, in this case 'state->fc_regions' may not be freed by krealloc, but 'state->fc_regions' already set NULL. Then will lead to 'state->fc_regions' memory leak.

In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK>

In the Linux kernel, the following vulnerability has been resolved: staging: greybus: audio_helper: remove unused and wrong debugfs usage In the greybus audio_helper code, the debugfs file for the dapm has the potential to be removed and memory will be leaked. There is also the very real potential for this code to remove ALL debugfs entries from the system, and it seems like this is what will really happen if this code ever runs. This all is very wrong as the greybus audio driver did not create this debugfs file, the sound core did and controls the lifespan of it. So remove all of the debugfs logic from the audio_helper code as there's no way it could be correct. If this really is needed, it can come back with a fixup for the incorrect usage of the debugfs_lookup() call which is what caused this to be noticed at all.

In the Linux kernel, the following vulnerability has been resolved: fuse: clear FR_SENT when re-adding requests into pending list The following warning was reported by lee bruce: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300 fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 Modules linked in: CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 ...... Call Trace: <TASK> fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334 fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367 call_read_iter include/linux/fs.h:2104 [inline] new_sync_read fs/read_write.c:395 [inline] vfs_read+0x85b/0xba0 fs/read_write.c:476 ksys_read+0x12f/0x260 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ...... </TASK> The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write() syscall in the reproducer program and it happens as follows: (1) calls fuse_dev_read() to read the INIT request The read succeeds. During the read, bit FR_SENT will be set on the request. (2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify The resend notify will resend all processing requests, so the INIT request is moved from processing list to pending list again. (3) calls fuse_dev_read() with an invalid output address fuse_dev_read() will try to copy the same INIT request to the output address, but it will fail due to the invalid address, so the INIT request is ended and triggers the warning in fuse_request_end(). Fix it by clearing FR_SENT when re-adding requests into pending list.

In the Linux kernel, the following vulnerability has been resolved: arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: sched: fix memory leak in tcindex_set_parms Syzkaller reports a memory leak as follows: ==================================== BUG: memory leak unreferenced object 0xffff88810c287f00 (size 256): comm "syz-executor105", pid 3600, jiffies 4294943292 (age 12.990s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814cf9f0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff839c9e07>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff839c9e07>] kmalloc_array include/linux/slab.h:627 [inline] [<ffffffff839c9e07>] kcalloc include/linux/slab.h:659 [inline] [<ffffffff839c9e07>] tcf_exts_init include/net/pkt_cls.h:250 [inline] [<ffffffff839c9e07>] tcindex_set_parms+0xa7/0xbe0 net/sched/cls_tcindex.c:342 [<ffffffff839caa1f>] tcindex_change+0xdf/0x120 net/sched/cls_tcindex.c:553 [<ffffffff8394db62>] tc_new_tfilter+0x4f2/0x1100 net/sched/cls_api.c:2147 [<ffffffff8389e91c>] rtnetlink_rcv_msg+0x4dc/0x5d0 net/core/rtnetlink.c:6082 [<ffffffff839eba67>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2540 [<ffffffff839eab87>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff839eab87>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff839eb046>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff8383e796>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff8383e796>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8383eb08>] ____sys_sendmsg+0x178/0x410 net/socket.c:2482 [<ffffffff83843678>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff838439c5>] __sys_sendmmsg+0x105/0x330 net/socket.c:2622 [<ffffffff83843c14>] __do_sys_sendmmsg net/socket.c:2651 [inline] [<ffffffff83843c14>] __se_sys_sendmmsg net/socket.c:2648 [inline] [<ffffffff83843c14>] __x64_sys_sendmmsg+0x24/0x30 net/socket.c:2648 [<ffffffff84605fd5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84605fd5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ==================================== Kernel uses tcindex_change() to change an existing filter properties. Yet the problem is that, during the process of changing, if `old_r` is retrieved from `p->perfect`, then kernel uses tcindex_alloc_perfect_hash() to newly allocate filter results, uses tcindex_filter_result_init() to clear the old filter result, without destroying its tcf_exts structure, which triggers the above memory leak. To be more specific, there are only two source for the `old_r`, according to the tcindex_lookup(). `old_r` is retrieved from `p->perfect`, or `old_r` is retrieved from `p->h`. * If `old_r` is retrieved from `p->perfect`, kernel uses tcindex_alloc_perfect_hash() to newly allocate the filter results. Then `r` is assigned with `cp->perfect + handle`, which is newly allocated. So condition `old_r && old_r != r` is true in this situation, and kernel uses tcindex_filter_result_init() to clear the old filter result, without destroying its tcf_exts structure * If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL according to the tcindex_lookup(). Considering that `cp->h` is directly copied from `p->h` and `p->perfect` is NULL, `r` is assigned with `tcindex_lookup(cp, handle)`, whose value should be the same as `old_r`, so condition `old_r && old_r != r` is false in this situation, kernel ignores using tcindex_filter_result_init() to clear the old filter result. So only when `old_r` is retrieved from `p->perfect` does kernel use tcindex_filter_result_init() to clear the old filter result, which triggers the above memory leak. Considering that there already exists a tc_filter_wq workqueue to destroy the old tcindex_d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix the issue of CMDQ memory leaks When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is not released correctly. Fix it.

In the Linux kernel, the following vulnerability has been resolved: thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash When CPU 0 is offline and intel_powerclamp is used to inject idle, it generates kernel BUG: BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687 caller is debug_smp_processor_id+0x17/0x20 CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 check_preemption_disabled+0xdd/0xe0 debug_smp_processor_id+0x17/0x20 powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp] ... ... Here CPU 0 is the control CPU by default and changed to the current CPU, if CPU 0 offlined. This check has to be performed under cpus_read_lock(), hence the above warning. Use get_cpu() instead of smp_processor_id() to avoid this BUG. [ rjw: Subject edits ]

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Reload only IB representors upon lag disable/enable On lag disable, the bond IB device along with all of its representors are destroyed, and then the slaves' representors get reloaded. In case the slave IB representor load fails, the eswitch error flow unloads all representors, including ethernet representors, where the netdevs get detached and removed from lag bond. Such flow is inaccurate as the lag driver is not responsible for loading/unloading ethernet representors. Furthermore, the flow described above begins by holding lag lock to prevent bond changes during disable flow. However, when reaching the ethernet representors detachment from lag, the lag lock is required again, triggering the following deadlock: Call trace: __switch_to+0xf4/0x148 __schedule+0x2c8/0x7d0 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x28 __mutex_lock.isra.13+0x2b8/0x570 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x4c/0x68 mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core] mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core] mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core] mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core] mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core] mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core] mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core] mlx5_disable_lag+0x130/0x138 [mlx5_core] mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0xdc/0x180 genl_family_rcv_msg_doit.isra.17+0xe8/0x138 genl_rcv_msg+0xe4/0x220 netlink_rcv_skb+0x44/0x108 genl_rcv+0x40/0x58 netlink_unicast+0x198/0x268 netlink_sendmsg+0x1d4/0x418 sock_sendmsg+0x54/0x60 __sys_sendto+0xf4/0x120 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x8c/0x120 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Thus, upon lag enable/disable, load and unload only the IB representors of the slaves preventing the deadlock mentioned above. While at it, refactor the mlx5_esw_offloads_rep_load() function to have a static helper method for its internal logic, in symmetry with the representor unload design.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd: fix potential integer overflow on shift of a int The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then passed as a 64 bit function argument. In the case where i is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clean up si_domain in the init_dmars() error path A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path.

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: ssh_css: Fix a null-pointer dereference in load_video_binaries The allocation failure of mycs->yuv_scaler_binary in load_video_binaries() is followed with a dereference of mycs->yuv_scaler_binary after the following call chain: sh_css_pipe_load_binaries() |-> load_video_binaries(mycs->yuv_scaler_binary == NULL) | |-> sh_css_pipe_unload_binaries() |-> unload_video_binaries() In unload_video_binaries(), it calls to ia_css_binary_unload with argument &pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer dereference is triggered.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Can't set dst buffer to done when lat decode error Core thread will call v4l2_m2m_buf_done to set dst buffer done for lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to free dst buffer when lat decode error, core thread will access kernel NULL pointer dereference, then crash.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: add atomic_check to bridge ops DRM commit_tails() will disable downstream crtc/encoder/bridge if both disable crtc is required and crtc->active is set before pushing a new frame downstream. There is a rare case that user space display manager issue an extra screen update immediately followed by close DRM device while down stream display interface is disabled. This extra screen update will timeout due to the downstream interface is disabled but will cause crtc->active be set. Hence the followed commit_tails() called by drm_release() will pass the disable downstream crtc/encoder/bridge conditions checking even downstream interface is disabled. This cause the crash to happen at dp_bridge_disable() due to it trying to access the main link register to push the idle pattern out while main link clocks is disabled. This patch adds atomic_check to prevent the extra frame will not be pushed down if display interface is down so that crtc->active will not be set neither. This will fail the conditions checking of disabling down stream crtc/encoder/bridge which prevent drm_release() from calling dp_bridge_disable() so that crash at dp_bridge_disable() prevented. There is no protection in the DRM framework to check if the display pipeline has been already disabled before trying again. The only check is the crtc_state->active but this is controlled by usermode using UAPI. Hence if the usermode sets this and then crashes, the driver needs to protect against double disable. SError Interrupt on CPU7, code 0x00000000be000411 -- SError CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19 Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __cmpxchg_case_acq_32+0x14/0x2c lr : do_raw_spin_lock+0xa4/0xdc sp : ffffffc01092b6a0 x29: ffffffc01092b6a0 x28: 0000000000000028 x27: 0000000000000038 x26: 0000000000000004 x25: ffffffd2973dce48 x24: 0000000000000000 x23: 00000000ffffffff x22: 00000000ffffffff x21: ffffffd2978d0008 x20: ffffffd2978d0008 x19: ffffff80ff759fc0 x18: 0000000000000000 x17: 004800a501260460 x16: 0441043b04600438 x15: 04380000089807d0 x14: 07b0089807800780 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000438 x10: 00000000000007d0 x9 : ffffffd2973e09e4 x8 : ffffff8092d53300 x7 : ffffff808902e8b8 x6 : 0000000000000001 x5 : ffffff808902e880 x4 : 0000000000000000 x3 : ffffff80ff759fc0 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffff80ff759fc0 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19 Hardware name: Google Lazor (rev3 - 8) (DT) Call trace: dump_backtrace.part.0+0xbc/0xe4 show_stack+0x24/0x70 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 panic+0x14c/0x32c nmi_panic+0x58/0x7c arm64_serror_panic+0x78/0x84 do_serror+0x40/0x64 el1h_64_error_handler+0x30/0x48 el1h_64_error+0x68/0x6c __cmpxchg_case_acq_32+0x14/0x2c _raw_spin_lock_irqsave+0x38/0x4c lock_timer_base+0x40/0x78 __mod_timer+0xf4/0x25c schedule_timeout+0xd4/0xfc __wait_for_common+0xac/0x140 wait_for_completion_timeout+0x2c/0x54 dp_ctrl_push_idle+0x40/0x88 dp_bridge_disable+0x24/0x30 drm_atomic_bridge_chain_disable+0x90/0xbc drm_atomic_helper_commit_modeset_disables+0x198/0x444 msm_atomic_commit_tail+0x1d0/0x374 commit_tail+0x80/0x108 drm_atomic_helper_commit+0x118/0x11c drm_atomic_commit+0xb4/0xe0 drm_client_modeset_commit_atomic+0x184/0x224 drm_client_modeset_commit_locked+0x58/0x160 drm_client_modeset_commit+0x3c/0x64 __drm_fb_helper_restore_fbdev_mode_unlocked+0x98/0xac drm_fb_helper_set_par+0x74/0x80 drm_fb_helper_hotplug_event+0xdc/0xe0 __drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xac drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x2c drm_fb_helper_lastclose+0x20/0x2c drm_lastclose+0x44/0x6c drm_release+0x88/0xd4 __fput+0x104/0x220 ____fput+0x1c/0x28 task_work_run+0x8c/0x100 d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash problem in concurrent scenario When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: WARN on vNMI + NMI window iff NMIs are outright masked When requesting an NMI window, WARN on vNMI support being enabled if and only if NMIs are actually masked, i.e. if the vCPU is already handling an NMI. KVM's ABI for NMIs that arrive simultanesouly (from KVM's point of view) is to inject one NMI and pend the other. When using vNMI, KVM pends the second NMI simply by setting V_NMI_PENDING, and lets the CPU do the rest (hardware automatically sets V_NMI_BLOCKING when an NMI is injected). However, if KVM can't immediately inject an NMI, e.g. because the vCPU is in an STI shadow or is running with GIF=0, then KVM will request an NMI window and trigger the WARN (but still function correctly). Whether or not the GIF=0 case makes sense is debatable, as the intent of KVM's behavior is to provide functionality that is as close to real hardware as possible. E.g. if two NMIs are sent in quick succession, the probability of both NMIs arriving in an STI shadow is infinitesimally low on real hardware, but significantly larger in a virtual environment, e.g. if the vCPU is preempted in the STI shadow. For GIF=0, the argument isn't as clear cut, because the window where two NMIs can collide is much larger in bare metal (though still small). That said, KVM should not have divergent behavior for the GIF=0 case based on whether or not vNMI support is enabled. And KVM has allowed simultaneous NMIs with GIF=0 for over a decade, since commit 7460fb4a3400 ("KVM: Fix simultaneous NMIs"). I.e. KVM's GIF=0 handling shouldn't be modified without a *really* good reason to do so, and if KVM's behavior were to be modified, it should be done irrespective of vNMI support.

In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak In crb_acpi_add(), we get the TPM2 table to retrieve information like start method, and then assign them to the priv data, so the TPM2 table is not used after the init, should be freed, call acpi_put_table() to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: ext4: init quota for 'old.inode' in 'ext4_rename' Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix an information leak in tipc_topsrv_kern_subscr Use a 8-byte write to initialize sub.usr_handle in tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized when issuing setsockopt(..., SOL_TIPC, ...). This resulted in an infoleak reported by KMSAN when the packet was received: ===================================================== BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169 instrument_copy_to_user ./include/linux/instrumented.h:121 copyout+0xbc/0x100 lib/iov_iter.c:169 _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527 copy_to_iter ./include/linux/uio.h:176 simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527 skb_copy_datagram_msg ./include/linux/skbuff.h:3903 packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469 ____sys_recvmsg+0x2c4/0x810 net/socket.c:? ___sys_recvmsg+0x217/0x840 net/socket.c:2743 __sys_recvmsg net/socket.c:2773 __do_sys_recvmsg net/socket.c:2783 __se_sys_recvmsg net/socket.c:2780 __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120 ... Uninit was stored to memory at: tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156 tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375 tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084 tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201 __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 __se_sys_setsockopt net/socket.c:2260 __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120 Local variable sub created at: tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 Bytes 84-87 of 88 are uninitialized Memory access of size 88 starts at ffff88801ed57cd0 Data copied to user address 0000000020000400 ... =====================================================

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd_process_device_init_vm error handling Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Assign dummy when codec not specified for a DAI link MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison.