In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate BOOT sectors_per_clusters When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a shift value. Make sure that the shift value is not too large before using it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large. This prevents negative shift values and shift values that are larger than the field size. Prevents this UBSAN error: UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16 shift exponent -192 is negative

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix cxl_region leak, cleanup targets at region delete When a region is deleted any targets that have been previously assigned to that region hold references to it. Trigger those references to drop by detaching all targets at unregister_region() time. Otherwise that region object will leak as userspace has lost the ability to detach targets once region sysfs is torn down.

In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible memory leak in mISDN_dsp_element_register() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, use put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the kfree() is removed. list_del() is called in mISDN_dsp_dev_release(), so it need be initialized.

In the Linux kernel, the following vulnerability has been resolved: soc: amlogic: Fix refcount leak in meson-secure-pwrc.c In meson_secure_pwrc_probe(), there is a refcount leak in one fail path.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix WARNING in __ip_vs_cleanup_batch() During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn or ip_vs_conn_sync fails to be created, the initialization is successful by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't be found during the remove. The following is the stack information: name 'ip_vs_conn_sync' WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 Call Trace: <TASK> __ip_vs_cleanup_batch+0x7d/0x120 ops_exit_list+0x125/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. a6xx_gmu_init() passes the node to of_find_device_by_node() and of_dma_configure(), of_find_device_by_node() will takes its reference, of_dma_configure() doesn't need the node after usage. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-hdmi: Fix refcount leak in imx_hdmi_probe of_find_device_by_node() takes reference, we should use put_device() to release it. when devm_kzalloc() fails, it doesn't have a put_device(), it will cause refcount leak. Add missing put_device() to fix this.

In the Linux kernel, the following vulnerability has been resolved: driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction Mounting NFS rootfs was timing out when deferred_probe_timeout was non-zero [1]. This was because ip_auto_config() initcall times out waiting for the network interfaces to show up when deferred_probe_timeout was non-zero. While ip_auto_config() calls wait_for_device_probe() to make sure any currently running deferred probe work or asynchronous probe finishes, that wasn't sufficient to account for devices being deferred until deferred_probe_timeout. Commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires") tried to fix that by making sure wait_for_device_probe() waits for deferred_probe_timeout to expire before returning. However, if wait_for_device_probe() is called from the kernel_init() context: - Before deferred_probe_initcall() [2], it causes the boot process to hang due to a deadlock. - After deferred_probe_initcall() [3], it blocks kernel_init() from continuing till deferred_probe_timeout expires and beats the point of deferred_probe_timeout that's trying to wait for userspace to load modules. Neither of this is good. So revert the changes to wait_for_device_probe(). [1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/ [2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/ [3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/

In the Linux kernel, the following vulnerability has been resolved: drm/omap: fix NULL but dereferenced coccicheck error Fix the following coccicheck warning: ./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL but dereferenced. Here should be ovl->idx rather than r_ovl->idx.

In the Linux kernel, the following vulnerability has been resolved: irqchip/realtek-rtl: Fix refcount leak in map_interrupts of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function doesn't call of_node_put() in error path. Call of_node_put() directly after of_property_read_u32() to cover both normal path and error path.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix connections leak when tlink setup failed If the tlink setup failed, lost to put the connections, then the module refcnt leak since the cifsd kthread not exit. Also leak the fscache info, and for next mount with fsc, it will print the follow errors: CIFS: Cache volume key already in use (cifs,127.0.0.1:445,TEST) Let's check the result of tlink setup, and do some cleanup.

In the Linux kernel, the following vulnerability has been resolved: arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall If a compat process tries to execute an unknown system call above the __ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the offending process. Information about the error is printed to dmesg in compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() -> arm64_show_signal(). arm64_show_signal() interprets a non-zero value for current->thread.fault_code as an exception syndrome and displays the message associated with the ESR_ELx.EC field (bits 31:26). current->thread.fault_code is set in compat_arm_syscall() -> arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx value. This means that the ESR_ELx.EC field has the value that the user set for the syscall number and the kernel can end up printing bogus exception messages*. For example, for the syscall number 0x68000000, which evaluates to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error: [ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000] [ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79 [ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which is misleading, as the bad compat syscall has nothing to do with pointer authentication. Stop arm64_show_signal() from printing exception syndrome information by having compat_arm_syscall() set the ESR_ELx value to 0, as it has no meaning for an invalid system call number. The example above now becomes: [ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000] [ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80 [ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which although shows less information because the syscall number, wrongfully advertised as the ESR value, is missing, it is better than showing plainly wrong information. The syscall number can be easily obtained with strace. *A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END evaluates to true; the syscall will exit to userspace in this case with the ENOSYS error code instead of arm64_notify_die() being called.

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init() When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested.

In the Linux kernel, the following vulnerability has been resolved: binder: fix alloc->vma_vm_mm null-ptr dereference Syzbot reported a couple issues introduced by commit 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA"), in which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not been initialized yet. This can happen if a binder_proc receives a transaction without having previously called mmap() to setup the binder_proc->alloc space in [1]. Also, a similar issue occurs via binder_alloc_print_pages() when we try to dump the debugfs binder stats file in [2]. Sample of syzbot's crash report: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0 syz-executor229[3755] cmdline: ./syz-executor2294415195 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923 [...] Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 down_read+0x98/0x450 kernel/locking/rwsem.c:1499 mmap_read_lock include/linux/mmap_lock.h:117 [inline] binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline] binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593 binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199 binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986 binder_ioctl_write_read drivers/android/binder.c:5036 [inline] binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] ================================================================== Fix these issues by setting up alloc->vma_vm_mm pointer during open() and caching directly from current->mm. This guarantees we have a valid reference to take the mmap_lock during scenarios described above. [1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459 [2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9

In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in 'ext4_da_release_space' Syzkaller report issue as follows: EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=0 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=0 EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks ------------[ cut here ]------------ WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524 Modules linked in: CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528 RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296 RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00 RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000 RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5 R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000 R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Above issue may happens as follows: ext4_da_write_begin ext4_create_inline_data ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); __ext4_ioctl ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag ext4_da_write_begin ext4_da_convert_inline_data_to_extent ext4_da_write_inline_data_begin ext4_da_map_blocks ext4_insert_delayed_block if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk)) ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1 allocated = true; ext4_es_insert_delayed_block(inode, lblk, allocated); ext4_writepages mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1 ext4_es_remove_extent ext4_da_release_space(inode, reserved); if (unlikely(to_free > ei->i_reserved_data_blocks)) -> to_free == 1 but ei->i_reserved_data_blocks == 0 -> then trigger warning as above To solve above issue, forbid inode do migrate which has inline data.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in __ip6_append_data Resurrect ubsan overflow checks and ubsan report this warning, fix it by change the variable [length] type to size_t. UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19 2147479552 + 8567 cannot be represented in type 'int' CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x214/0x230 show_stack+0x30/0x78 dump_stack_lvl+0xf8/0x118 dump_stack+0x18/0x30 ubsan_epilogue+0x18/0x60 handle_overflow+0xd0/0xf0 __ubsan_handle_add_overflow+0x34/0x44 __ip6_append_data.isra.48+0x1598/0x1688 ip6_append_data+0x128/0x260 udpv6_sendmsg+0x680/0xdd0 inet6_sendmsg+0x54/0x90 sock_sendmsg+0x70/0x88 ____sys_sendmsg+0xe8/0x368 ___sys_sendmsg+0x98/0xe0 __sys_sendmmsg+0xf4/0x3b8 __arm64_sys_sendmmsg+0x34/0x48 invoke_syscall+0x64/0x160 el0_svc_common.constprop.4+0x124/0x300 do_el0_svc+0x44/0xc8 el0_svc+0x3c/0x1e8 el0t_64_sync_handler+0x88/0xb0 el0t_64_sync+0x16c/0x170 Changes since v1: -Change the variable [length] type to unsigned, as Eric Dumazet suggested. Changes since v2: -Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested. Changes since v3: -Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as Jakub Kicinski suggested.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix lockdep splat in in6_dump_addrs() As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix use_count leakage when handling boot-on I found a use_count leakage towards supply regulator of rdev with boot-on option. ┌───────────────────┐ ┌───────────────────┐ │ regulator_dev A │ │ regulator_dev B │ │ (boot-on) │ │ (boot-on) │ │ use_count=0 │◀──supply──│ use_count=1 │ │ │ │ │ └───────────────────┘ └───────────────────┘ In case of rdev(A) configured with `regulator-boot-on', the use_count of supplying regulator(B) will increment inside regulator_enable(rdev->supply). Thus, B will acts like always-on, and further balanced regulator_enable/disable cannot actually disable it anymore. However, B was also configured with `regulator-boot-on', we wish it could be disabled afterwards.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: megachips: Fix a null pointer dereference bug When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.923139] i2c_device_remove+0x181/0x1f0 The two bridges (stdp2690, stdp4028) do not probe at the same time, so the driver does not call ge_b850v3_resgiter() when probing, causing the driver to try to remove the object that has not been initialized. Fix this by checking whether both the bridges are probed.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors If dw_pcie_ep_init() fails to perform any action after the EPC memory is initialized and the MSI memory region is allocated, the latter parts won't be undone thus causing a memory leak. Add a cleanup-on-error path to fix these leaks. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: bpf: fix potential 32-bit overflow when accessing ARRAY map element If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places.

In the Linux kernel, the following vulnerability has been resolved: media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: cxl: Fix refcount leak in cxl_calc_capp_routing of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function only calls of_node_put() in normal path, missing it in the error path. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() lan966x_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: lan966x_stats_init() create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: thermal/core: Fix memory leak in __thermal_cooling_device_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888010080000 (size 264312): comm "182", pid 102533, jiffies 4296434960 (age 10.100s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 40 7f 1f b9 ff ff ff ff ........@....... backtrace: [<0000000038b2f4fc>] kmalloc_order_trace+0x1d/0x110 mm/slab_common.c:969 [<00000000ebcb8da5>] __kmalloc+0x373/0x420 include/linux/slab.h:510 [<0000000084137f13>] thermal_cooling_device_setup_sysfs+0x15d/0x2d0 include/linux/slab.h:586 [<00000000352b8755>] __thermal_cooling_device_register+0x332/0xa60 drivers/thermal/thermal_core.c:927 [<00000000fb9f331b>] devm_thermal_of_cooling_device_register+0x6b/0xf0 drivers/thermal/thermal_core.c:1041 [<000000009b8012d2>] max6650_probe.cold+0x557/0x6aa drivers/hwmon/max6650.c:211 [<00000000da0b7e04>] i2c_device_probe+0x472/0xac0 drivers/i2c/i2c-core-base.c:561 If device_register() fails, thermal_cooling_device_destroy_sysfs() need be called to free the memory allocated in thermal_cooling_device_setup_sysfs().

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Make .remove and .shutdown HW shutdown consistent Drivers' .remove and .shutdown callbacks are executed on different code paths. The former is called when a device is removed from the bus, while the latter is called at system shutdown time to quiesce the device. This means that some overlap exists between the two, because both have to take care of properly shutting down the hardware. But currently the logic used in these two callbacks isn't consistent in msm drivers, which could lead to kernel panic. For example, on .remove the component is deleted and its .unbind callback leads to the hardware being shutdown but only if the DRM device has been marked as registered. That check doesn't exist in the .shutdown logic and this can lead to the driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't been properly initialized. A situation like this can happen if drivers for expected sub-devices fail to probe, since the .bind callback will never be executed. If that is the case, drm_atomic_helper_shutdown() will attempt to take mutexes that are only initialized if drm_mode_config_init() is called during a device bind. This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix shutdown hook in case GPU components failed to bind"), but unfortunately it still happens in some cases as the one mentioned above, i.e: systemd-shutdown[1]: Powering off. kvm: exiting hardware virtualization platform wifi-firmware.0: Removing from iommu group 12 platform video-firmware.0: Removing from iommu group 10 ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0 ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0 lr : drm_modeset_lock_all_ctx+0x48/0x3d0 sp : ffff80000805bb80 x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030 x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800 x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0 Call trace: drm_modeset_lock_all_ctx+0x3c4/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 ---[ end trace 0000000000000000 ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000 [0000000000000018] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ww_mutex_lock+0x28/0x32c lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0 sp : ffff80000805bb50 x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000 x26: 00000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ARM: exynos: Fix refcount leak in exynos_map_pmu of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer.

In the Linux kernel, the following vulnerability has been resolved: net: genl: fix error path memory leak in policy dumping If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector() If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Prevent panic when SDMA is disabled If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to hfi1_write_iter() will dereference a NULL pointer and panic. A typical stack frame is: sdma_select_user_engine [hfi1] hfi1_user_sdma_process_request [hfi1] hfi1_write_iter [hfi1] do_iter_readv_writev do_iter_write vfs_writev do_writev do_syscall_64 The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with EINVAL.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix leak of nested actions While parsing user-provided actions, openvswitch module may dynamically allocate memory and store pointers in the internal copy of the actions. So this memory has to be freed while destroying the actions. Currently there are only two such actions: ct() and set(). However, there are many actions that can hold nested lists of actions and ovs_nla_free_flow_actions() just jumps over them leaking the memory. For example, removal of the flow with the following actions will lead to a leak of the memory allocated by nf_ct_tmpl_alloc(): actions:clone(ct(commit),0) Non-freed set() action may also leak the 'dst' structure for the tunnel info including device references. Under certain conditions with a high rate of flow rotation that may cause significant memory leak problem (2MB per second in reporter's case). The problem is also hard to mitigate, because the user doesn't have direct control over the datapath flows generated by OVS. Fix that by iterating over all the nested actions and freeing everything that needs to be freed recursively. New build time assertion should protect us from this problem if new actions will be added in the future. Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all attributes has to be explicitly checked. sample() and clone() actions are mixing extra attributes into the user-provided action list. That prevents some code generalization too.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible access to freed memory in link clear After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()-> mlx5_tc_ct_clean() Only afterwards, tc cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup() which would have deleted all the tc ct rules, and so delete all the offloaded tuples. Fix this reversing the order of init and on cleanup, which will result in tc cleanup then ct cleanup. [ 9443.593347] WARNING: CPU: 2 PID: 206774 at drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1882 mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593349] Modules linked in: act_ct nf_flow_table rdma_ucm(O) rdma_cm(O) iw_cm(O) ib_ipoib(O) ib_cm(O) ib_umad(O) mlx5_core(O-) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) psample ib_core(O) mlx_compat(O) ip_gre gre ip_tunnel act_vlan bonding geneve esp6_offload esp6 esp4_offload esp4 act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel act_mirred act_skbedit act_gact cls_flower sch_ingress nfnetlink_cttimeout nfnetlink xfrm_user xfrm_algo 8021q garp stp ipmi_devintf mrp ipmi_msghandler llc openvswitch nsh nf_conncount nf_nat mst_pciconf(O) dm_multipath sbsa_gwdt uio_pdrv_genirq uio mlxbf_pmc mlxbf_pka mlx_trio mlx_bootctl(O) bluefield_edac sch_fq_codel ip_tables ipv6 crc_ccitt btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 crct10dif_ce i2c_mlxbf gpio_mlxbf2 mlxbf_gige aes_neon_bs aes_neon_blk [last unloaded: mlx5_ib] [ 9443.593419] CPU: 2 PID: 206774 Comm: modprobe Tainted: G O 5.4.0-1023.24.gc14613d-bluefield #1 [ 9443.593422] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:143ebaf Jan 11 2022 [ 9443.593424] pstate: 20000005 (nzCv daif -PAN -UAO) [ 9443.593489] pc : mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593545] lr : mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593546] sp : ffff8000135dbab0 [ 9443.593548] x29: ffff8000135dbab0 x28: ffff0003a6ab8e80 [ 9443.593550] x27: 0000000000000000 x26: ffff0003e07d7000 [ 9443.593552] x25: ffff800009609de0 x24: ffff000397fb2120 [ 9443.593554] x23: ffff0003975c0000 x22: 0000000000000000 [ 9443.593556] x21: ffff0003975f08c0 x20: ffff800009609de0 [ 9443.593558] x19: ffff0003c8a13380 x18: 0000000000000014 [ 9443.593560] x17: 0000000067f5f125 x16: 000000006529c620 [ 9443.593561] x15: 000000000000000b x14: 0000000000000000 [ 9443.593563] x13: 0000000000000002 x12: 0000000000000001 [ 9443.593565] x11: ffff800011108868 x10: 0000000000000000 [ 9443.593567] x9 : 0000000000000000 x8 : ffff8000117fb270 [ 9443.593569] x7 : ffff0003ebc01288 x6 : 0000000000000000 [ 9443.593571] x5 : ffff800009591ab8 x4 : fffffe000f6d9a20 [ 9443.593572] x3 : 0000000080040001 x2 : fffffe000f6d9a20 [ 9443.593574] x1 : ffff8000095901d8 x0 : 0000000000000025 [ 9443.593577] Call trace: [ 9443.593634] mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593688] mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593743] mlx5_tc_ct_clean+0x34/0xa8 [mlx5_core] [ 9443.593797] mlx5e_tc_esw_cleanup+0x58/0x88 [mlx5_core] [ 9443.593851] mlx5e_rep_tc_cleanup+0x24/0x30 [mlx5_core] [ 9443.593905] mlx5e_cleanup_rep_tx+0x6c/0x78 [mlx5_core] [ 9443.593959] mlx5e_detach_netdev+0x74/0x98 [mlx5_core] [ 9443.594013] mlx5e_netdev_change_profile+0x70/0x180 [mlx5_core] [ 9443.594067] mlx5e_netdev_attach_nic_profile+0x34/0x40 [mlx5_core] [ 9443.594122] mlx5e_vport_rep_unload+0x15c/0x1a8 [mlx5_core] [ 9443.594177] mlx5_eswitch_unregister_vport_reps+0x228/0x298 [mlx5_core] [ 9443.594231] mlx5e_rep_remove+0x2c/0x38 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arch/arm64: Fix topology initialization for core scheduling Arm64 systems rely on store_cpu_topology() to call update_siblings_masks() to transfer the toplogy to the various cpu masks. This needs to be done before the call to notify_cpu_starting() which tells the scheduler about each cpu found, otherwise the core scheduling data structures are setup in a way that does not match the actual topology. With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1` for !leaders in: notify_cpu_starting() cpuhp_invoke_callback_range() sched_cpu_starting() sched_core_cpu_starting() which leads to rq->core not being correctly set for !leader-rq's. Without this change stress-ng (which enables core scheduling in its prctl tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning and then a crash (trimmed for legibility): [ 1853.805168] ------------[ cut here ]------------ [ 1853.809784] task_rq(b)->core != rq->core [ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4 ... [ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 1854.231256] Call trace: [ 1854.233689] pick_next_task+0x3dc/0x81c [ 1854.237512] __schedule+0x10c/0x4cc [ 1854.240988] schedule_idle+0x34/0x54

In the Linux kernel, the following vulnerability has been resolved: af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/

In the Linux kernel, the following vulnerability has been resolved: veth: Ensure eth header is in skb's linear part After feeding a decapsulated packet to a veth device with act_mirred, skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(), which expects at least ETH_HLEN byte of linear data (as __dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes unconditionally). Use pskb_may_pull() to ensure veth_xmit() respects this constraint. kernel BUG at include/linux/skbuff.h:2328! RIP: 0010:eth_type_trans+0xcf/0x140 Call Trace: <IRQ> __dev_forward_skb2+0xe3/0x160 veth_xmit+0x6e/0x250 [veth] dev_hard_start_xmit+0xc7/0x200 __dev_queue_xmit+0x47f/0x520 ? skb_ensure_writable+0x85/0xa0 ? skb_mpls_pop+0x98/0x1c0 tcf_mirred_act+0x442/0x47e [act_mirred] tcf_action_exec+0x86/0x140 fl_classify+0x1d8/0x1e0 [cls_flower] ? dma_pte_clear_level+0x129/0x1a0 ? dma_pte_clear_level+0x129/0x1a0 ? prb_fill_curr_block+0x2f/0xc0 ? skb_copy_bits+0x11a/0x220 __tcf_classify+0x58/0x110 tcf_classify_ingress+0x6b/0x140 __netif_receive_skb_core.constprop.0+0x47d/0xfd0 ? __iommu_dma_unmap_swiotlb+0x44/0x90 __netif_receive_skb_one_core+0x3d/0xa0 netif_receive_skb+0x116/0x170 be_process_rx+0x22f/0x330 [be2net] be_poll+0x13c/0x370 [be2net] __napi_poll+0x2a/0x170 net_rx_action+0x22f/0x2f0 __do_softirq+0xca/0x2a8 __irq_exit_rcu+0xc1/0xe0 common_interrupt+0x83/0xa0

In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix NULL dereference in error cleanup In watch_queue_set_size(), the error cleanup code doesn't take account of the fact that __free_page() can't handle a NULL pointer when trying to free up buffer pages that did get allocated. Fix this by only calling __free_page() on the pages actually allocated. Without the fix, this can lead to something like the following: BUG: KASAN: null-ptr-deref in __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 Read of size 4 at addr 0000000000000034 by task syz-executor168/3599 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold+0x66/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] page_ref_count include/linux/page_ref.h:67 [inline] put_page_testzero include/linux/mm.h:717 [inline] __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 watch_queue_set_size+0x499/0x630 kernel/watch_queue.c:275 pipe_ioctl+0xac/0x2b0 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vt_ioctl: fix array_index_nospec in vt_setactivate array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam.

In the Linux kernel, the following vulnerability has been resolved: net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]: kworker/0:16/14617 is trying to acquire lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 [...] but task is already holding lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572 The neighbor entry turned to NUD_FAILED state, where __neigh_event_send() triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce arp latency") via neigh_probe() given table lock was held. One option to fix this situation is to defer the neigh_probe() back to the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case of NTF_MANAGED, this deferral is acceptable given this only happens on actual failure state and regular / expected state is NUD_VALID with the entry already present. The fix adds a parameter to __neigh_event_send() in order to communicate whether immediate probe is allowed or disallowed. Existing call-sites of neigh_event_send() default as-is to immediate probe. However, the neigh_managed_work() disables it via use of neigh_event_send_probe(). [0] <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline] check_deadlock kernel/locking/lockdep.c:2999 [inline] validate_chain kernel/locking/lockdep.c:3788 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027 lock_acquire kernel/locking/lockdep.c:5639 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604 __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline] _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334 ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508 ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650 ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742 neigh_probe+0xc2/0x110 net/core/neighbour.c:1040 __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201 neigh_event_send include/net/neighbour.h:470 [inline] neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK>

In the Linux kernel, the following vulnerability has been resolved: IB/core: Fix a nested dead lock as part of ODP flow Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] <TASK> [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093] </TASK>

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init() for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the error path to avoid reference count leak.

In the Linux kernel, the following vulnerability has been resolved: tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY) calls over the same TCP socket would again trigger the infamous warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); While Talal took into account a mix of regular copied data and MSG_ZEROCOPY one in the same skb, the sendpage() path has been forgotten. We want the charging to happen for sendpage(), because pages could be coming from a pipe. What is missing is the downgrading of pure zerocopy status to make sure sk_forward_alloc will stay synced. Add tcp_downgrade_zcopy_pure() helper so that we can use it from the two callers.

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix route with nexthop object delete warning FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f2455 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: fix possible NULL pointer dereference As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: gpio: amd8111: Fix PCI device reference count leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL input parameter, there is no problem for the 'Device not found' branch. For the normal path, add pci_dev_put() in amd_gpio_exit().

In the Linux kernel, the following vulnerability has been resolved: mm: vmscan: remove deadlock due to throttling failing to make progress A soft lockup bug in kcompactd was reported in a private bugzilla with the following visible in dmesg; watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479] The machine had 256G of RAM with no swap and an earlier failed allocation indicated that node 0 where kcompactd was run was potentially unreclaimable; Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes Vlastimil Babka investigated a crash dump and found that a task migrating pages was trying to drain PCP lists; PID: 52922 TASK: ffff969f820e5000 CPU: 19 COMMAND: "kworker/u128:3" Call Trace: __schedule schedule schedule_timeout wait_for_completion __flush_work __drain_all_pages __alloc_pages_slowpath.constprop.114 __alloc_pages alloc_migration_target migrate_pages migrate_to_node do_migrate_pages cpuset_migrate_mm_workfn process_one_work worker_thread kthread ret_from_fork This failure is specific to CONFIG_PREEMPT=n builds. The root of the problem is that kcompact0 is not rescheduling on a CPU while a task that has isolated a large number of the pages from the LRU is waiting on kcompact0 to reschedule so the pages can be released. While shrink_inactive_list() only loops once around too_many_isolated, reclaim can continue without rescheduling if sc->skipped_deactivate == 1 which could happen if there was no file LRU and the inactive anon list was not low.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Fix error handling in mt8195_mt6359_rt1019_rt5682_dev_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: LSM: general protection fault in legacy_parse_param The usual LSM hook "bail on fail" scheme doesn't work for cases where a security module may return an error code indicating that it does not recognize an input. In this particular case Smack sees a mount option that it recognizes, and returns 0. A call to a BPF hook follows, which returns -ENOPARAM, which confuses the caller because Smack has processed its data. The SELinux hook incorrectly returns 1 on success. There was a time when this was correct, however the current expectation is that it return 0 on success. This is repaired.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak.