In the Linux kernel, the following vulnerability has been resolved: block: Fix iterating over an empty bio with bio_for_each_folio_all If the bio contains no data, bio_first_folio() calls page_folio() on a NULL pointer and oopses. Move the test that we've reached the end of the bio from bio_next_folio() to bio_first_folio(). [axboe: add unlikely() to error case]

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix dereference after null check check the pointer hive before use.

In the Linux kernel, the following vulnerability has been resolved: pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel crash when we try to hot-unplug/disable the PCIe switch/bridge from the PHB. The crash occurs because although the MSI data structure has been released during disable/hot-unplug path and it has been assigned with NULL, still during unregistration the code was again trying to explicitly disable the MSI which causes the NULL pointer dereference and kernel crash. The patch fixes the check during unregistration path to prevent invoking pci_disable_msi/msix() since its data structure is already freed.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: reset mmio mappings with devm Set our various mmio mappings to NULL. This should make it easier to catch something rogue trying to mess with mmio after device removal. For example, we might unmap everything and then start hitting some mmio address which has already been unmamped by us and then remapped by something else, causing all kinds of carnage.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.

In the Linux kernel, the following vulnerability has been resolved: ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery() When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference issue. Fix it by adding the check in ublk_ctrl_start_recovery() and return immediately in case of zero 'ub->nr_queues_ready'. BUG: kernel NULL pointer dereference, address: 0000000000000028 RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x75/0x170 ? exc_page_fault+0x64/0x140 ? asm_exc_page_fault+0x22/0x30 ? ublk_ctrl_start_recovery.constprop.0+0x82/0x180 ublk_ctrl_uring_cmd+0x4f7/0x6c0 ? pick_next_task_idle+0x26/0x40 io_uring_cmd+0x9a/0x1b0 io_issue_sqe+0x193/0x3f0 io_wq_submit_work+0x9b/0x390 io_worker_handle_work+0x165/0x360 io_wq_worker+0xcb/0x2f0 ? finish_task_switch.isra.0+0x203/0x290 ? finish_task_switch.isra.0+0x203/0x290 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: Check if fully initialized before signalling HPD event via IRQ Make sure the connector is fully initialized before signalling any HPD events via drm_kms_helper_hotplug_event(), otherwise this may lead to NULL pointer dereference.

Input validation vulnerability in the USB service module Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Run DC_LOG_DC after checking link->link_enc [WHAT] The DC_LOG_DC should be run after link->link_enc is checked, not before. This fixes 1 REVERSE_INULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Move unregister out of atomic section Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")' moved the pmic_glink client list under a spinlock, as it is accessed by the rpmsg/glink callback, which in turn is invoked from IRQ context. This means that ucsi_unregister() is now called from atomic context, which isn't feasible as it's expecting a sleepable context. An effort is under way to get GLINK to invoke its callbacks in a sleepable context, but until then lets schedule the unregistration. A side effect of this is that ucsi_unregister() can now happen after the remote processor, and thereby the communication link with it, is gone. pmic_glink_send() is amended with a check to avoid the resulting NULL pointer dereference. This does however result in the user being informed about this error by the following entry in the kernel log: ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: Check tbo resource pointer Validate tbo resource pointer, skip if NULL

In the Linux kernel, the following vulnerability has been resolved: video/aperture: optionally match the device in sysfb_disable() In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled()

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: the warning dereferencing obj for nbio_v7_4 if ras_manager obj null, don't print NBIO err data

In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: Check for unset descriptor Make sure the descriptor has been set before looking at maxpacket. This fixes a null pointer panic in this case. This may happen if the gadget doesn't properly set up the endpoint for the current speed, or the gadget descriptors are malformed and the descriptor for the speed/endpoint are not found. No current gadget driver is known to have this problem, but this may cause a hard-to-find bug during development of new gadgets.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/

In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference.

A NULL pointer dereference flaw was found in vmxnet3_rq_cleanup in drivers/net/vmxnet3/vmxnet3_drv.c in the networking sub-component in vmxnet3 in the Linux Kernel. This issue may allow a local attacker with normal user privilege to cause a denial of service due to a missing sanity check during cleanup.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer.

An issue in radareorg radare2 v.0.9.7 through v.5.8.6 and fixed in v.5.8.8 allows a local attacker to cause a denial of service via the grub_sfs_read_extent function.

In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77

In the Linux kernel, the following vulnerability has been resolved: erofs: fix inconsistent per-file compression format EROFS can select compression algorithms on a per-file basis, and each per-file compression algorithm needs to be marked in the on-disk superblock for initialization. However, syzkaller can generate inconsistent crafted images that use an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA algorithmtype even it's not set in `sbi->available_compr_algs`. This can lead to an unexpected "BUG: kernel NULL pointer dereference" if the corresponding decompressor isn't built-in. Fix this by checking against `sbi->available_compr_algs` for each m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset bitmap is now fixed together since it was harmless previously.

In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane).

An issue was discovered in the Linux kernel through 5.11.11. synic_get in arch/x86/kvm/hyperv.c has a NULL pointer dereference for certain accesses to the SynIC Hyper-V context, aka CID-919f4ebc5987.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the previously true judgment "p->header.flag & BT-LEAF" to change to no after writing the name operation, this leads to entering an incorrect branch and accessing the uninitialized object ih when judging this condition for the second time. [Fix] After got the page, check freelist first, if freelist == 0 then exit dtInsert() and return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update.

SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.

TensorFlow is an end-to-end open source platform for machine learning. An attacker can trigger a dereference of a null pointer in `tf.raw_ops.StringNGrams`. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/1cdd4da14282210cc759e468d9781741ac7d01bf/tensorflow/core/kernels/string_ngrams_op.cc#L67-L74) does not fully validate the `data_splits` argument. This would result in `ngrams_data`(https://github.com/tensorflow/tensorflow/blob/1cdd4da14282210cc759e468d9781741ac7d01bf/tensorflow/core/kernels/string_ngrams_op.cc#L106-L110) to be a null pointer when the output would be computed to have 0 or negative size. Later writes to the output tensor would then cause a null pointer dereference. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

TensorFlow is an end-to-end open source platform for machine learning. The implementation of `tf.raw_ops.SdcaOptimizer` triggers undefined behavior due to dereferencing a null pointer. The implementation(https://github.com/tensorflow/tensorflow/blob/60a45c8b6192a4699f2e2709a2645a751d435cc3/tensorflow/core/kernels/sdca_internal.cc) does not validate that the user supplied arguments satisfy all constraints expected by the op(https://www.tensorflow.org/api_docs/python/tf/raw_ops/SdcaOptimizer). The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: Fix crash when adding interface under a lag Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag") fixed a similar issue in the lan966x driver caused by a NULL pointer dereference. The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic and is susceptible to the same crash. This issue specifically affects the ocelot_vsc7514.c frontend, which leaves unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as it uses the DSA framework which registers all ports. Fix this by checking if the port pointer is valid before accessing it.

In the Linux kernel, the following vulnerability has been resolved: ima: Avoid blocking in RCU read-side critical section A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case]

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset `qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class itself is active. Two qfq_class objects may point to the same leaf_qdisc. This happens when: 1. one QFQ qdisc is attached to the dev as the root qdisc, and 2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get() / qdisc_put()) and is pending to be destroyed, as in function tc_new_tfilter. When packets are enqueued through the root QFQ qdisc, the shared leaf_qdisc->q.qlen increases. At the same time, the second QFQ qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters qfq_reset() with its own q->q.qlen == 0, but its class's leaf qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate an inactive aggregate and trigger a null-deref in qfq_deactivate_agg: [ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 0.903571] #PF: supervisor write access in kernel mode [ 0.903860] #PF: error_code(0x0002) - not-present page [ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0 [ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI [ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE [ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.910247] PKRU: 55555554 [ 0.910391] Call Trace: [ 0.910527] <TASK> [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485) [ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036) [ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076) [ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447) [ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) [ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861) [ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550) [ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) [ 0.912296] ? __alloc_skb (net/core/skbuff.c:706) [ 0.912484] netlink_sendmsg (net/netlink/af ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.

Potential null pointer dereference in KGSL GPU auxiliary command due to improper validation of user input in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile

In the Linux kernel, the following vulnerability has been resolved: net: sock: fix hardened usercopy panic in sock_recv_errqueue skbuff_fclone_cache was created without defining a usercopy region, [1] unlike skbuff_head_cache which properly whitelists the cb[] field. [2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is enabled and the kernel attempts to copy sk_buff.cb data to userspace via sock_recv_errqueue() -> put_cmsg(). The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1] 2. The skb is cloned via skb_clone() using the pre-allocated fclone [3] 3. The cloned skb is queued to sk_error_queue for timestamp reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE) 5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb [4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5] When cloned skbs allocated from skbuff_fclone_cache are used in the socket error queue, accessing the sock_exterr_skb structure in skb->cb via put_cmsg() triggers a usercopy hardening violation: [ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)! [ 5.382796] kernel BUG at mm/usercopy.c:102! [ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7 [ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80 [ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490 [ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246 [ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74 [ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0 [ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74 [ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001 [ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00 [ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000 [ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0 [ 5.384903] PKRU: 55555554 [ 5.384903] Call Trace: [ 5.384903] <TASK> [ 5.384903] __check_heap_object+0x9a/0xd0 [ 5.384903] __check_object_size+0x46c/0x690 [ 5.384903] put_cmsg+0x129/0x5e0 [ 5.384903] sock_recv_errqueue+0x22f/0x380 [ 5.384903] tls_sw_recvmsg+0x7ed/0x1960 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? schedule+0x6d/0x270 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? mutex_unlock+0x81/0xd0 [ 5.384903] ? __pfx_mutex_unlock+0x10/0x10 [ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10 [ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0 [ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee) This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure. [1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885 [2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104 [3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566 [4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491 [5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719

A NULL pointer dereference flaw was found in dbFree in fs/jfs/jfs_dmap.c in the journaling file system (JFS) in the Linux Kernel. This issue may allow a local attacker to crash the system due to a missing sanity check.

In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Fix bpf_plt pointer arithmetic Kui-Feng Lee reported a crash on s390x triggered by the dummy_st_ops/dummy_init_ptr_arg test [1]: [<0000000000000002>] 0x2 [<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250 [<000000000033145a>] __sys_bpf+0xa1a/0xd00 [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50 [<0000000000c4382c>] __do_syscall+0x244/0x300 [<0000000000c59a40>] system_call+0x70/0x98 This is caused by GCC moving memcpy() after assignments in bpf_jit_plt(), resulting in NULL pointers being written instead of the return and the target addresses. Looking at the GCC internals, the reordering is allowed because the alias analysis thinks that the memcpy() destination and the assignments' left-hand-sides are based on different objects: new_plt and bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot alias. This is in turn due to a violation of the C standard: When two pointers are subtracted, both shall point to elements of the same array object, or one past the last element of the array object ... From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects and cannot be subtracted. In the practical terms, doing so confuses the GCC's alias analysis. The code was written this way in order to let the C side know a few offsets defined in the assembly. While nice, this is by no means necessary. Fix the noncompliance by hardcoding these offsets. [1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/

dnspod-sr 0dfbd37 is vulnerable to buffer overflow.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add null pointer check to attr_load_runs_vcn Some metadata files are handled before MFT. This adds a null pointer check for some corner cases that could lead to NPD while reading these metadata files for a malformed NTFS image. [ 240.190827] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 240.191583] #PF: supervisor read access in kernel mode [ 240.191956] #PF: error_code(0x0000) - not-present page [ 240.192391] PGD 0 P4D 0 [ 240.192897] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 240.193805] CPU: 0 PID: 242 Comm: mount Tainted: G B 5.19.0+ #17 [ 240.194477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 240.195152] RIP: 0010:ni_find_attr+0xae/0x300 [ 240.195679] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f [ 240.196642] RSP: 0018:ffff88800812f690 EFLAGS: 00000286 [ 240.197019] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff85ef037a [ 240.197523] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff88e95f60 [ 240.197877] RBP: ffff88800812f738 R08: 0000000000000001 R09: fffffbfff11d2bed [ 240.198292] R10: ffffffff88e95f67 R11: fffffbfff11d2bec R12: 0000000000000000 [ 240.198647] R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [ 240.199410] FS: 00007f233c33be40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 240.199895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 240.200314] CR2: 0000000000000158 CR3: 0000000004d32000 CR4: 00000000000006f0 [ 240.200839] Call Trace: [ 240.201104] <TASK> [ 240.201502] ? ni_load_mi+0x80/0x80 [ 240.202297] ? ___slab_alloc+0x465/0x830 [ 240.202614] attr_load_runs_vcn+0x8c/0x1a0 [ 240.202886] ? __kasan_slab_alloc+0x32/0x90 [ 240.203157] ? attr_data_write_resident+0x250/0x250 [ 240.203543] mi_read+0x133/0x2c0 [ 240.203785] mi_get+0x70/0x140 [ 240.204012] ni_load_mi_ex+0xfa/0x190 [ 240.204346] ? ni_std5+0x90/0x90 [ 240.204588] ? __kasan_kmalloc+0x88/0xb0 [ 240.204859] ni_enum_attr_ex+0xf1/0x1c0 [ 240.205107] ? ni_fname_type.part.0+0xd0/0xd0 [ 240.205600] ? ntfs_load_attr_list+0xbe/0x300 [ 240.205864] ? ntfs_cmp_names_cpu+0x125/0x180 [ 240.206157] ntfs_iget5+0x56c/0x1870 [ 240.206510] ? ntfs_get_block_bmap+0x70/0x70 [ 240.206776] ? __kasan_kmalloc+0x88/0xb0 [ 240.207030] ? set_blocksize+0x95/0x150 [ 240.207545] ntfs_fill_super+0xb8f/0x1e20 [ 240.207839] ? put_ntfs+0x1d0/0x1d0 [ 240.208069] ? vsprintf+0x20/0x20 [ 240.208467] ? mutex_unlock+0x81/0xd0 [ 240.208846] ? set_blocksize+0x95/0x150 [ 240.209221] get_tree_bdev+0x232/0x370 [ 240.209804] ? put_ntfs+0x1d0/0x1d0 [ 240.210519] ntfs_fs_get_tree+0x15/0x20 [ 240.210991] vfs_get_tree+0x4c/0x130 [ 240.211455] path_mount+0x645/0xfd0 [ 240.211806] ? putname+0x80/0xa0 [ 240.212112] ? finish_automount+0x2e0/0x2e0 [ 240.212559] ? kmem_cache_free+0x110/0x390 [ 240.212906] ? putname+0x80/0xa0 [ 240.213329] do_mount+0xd6/0xf0 [ 240.213829] ? path_mount+0xfd0/0xfd0 [ 240.214246] ? __kasan_check_write+0x14/0x20 [ 240.214774] __x64_sys_mount+0xca/0x110 [ 240.215080] do_syscall_64+0x3b/0x90 [ 240.215442] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 240.215811] RIP: 0033:0x7f233b4e948a [ 240.216104] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 240.217615] RSP: 002b:00007fff02211ec8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 240.218718] RAX: ffffffffffffffda RBX: 0000561cdc35b060 RCX: 00007f233b4e948a [ 240.219556] RDX: 0000561cdc35b260 RSI: 0000561cdc35b2e0 RDI: 0000561cdc363af0 [ 240.219975] RBP: 0000000000000000 R08: 0000561cdc35b280 R09: 0000000000000020 [ 240.220403] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000561cdc363af0 [ 240.220803] R13: 000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate preallocated blocks in f2fs_file_open() chenyuwen reports a f2fs bug as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000011 fscrypt_set_bio_crypt_ctx+0x78/0x1e8 f2fs_grab_read_bio+0x78/0x208 f2fs_submit_page_read+0x44/0x154 f2fs_get_read_data_page+0x288/0x5f4 f2fs_get_lock_data_page+0x60/0x190 truncate_partial_data_page+0x108/0x4fc f2fs_do_truncate_blocks+0x344/0x5f0 f2fs_truncate_blocks+0x6c/0x134 f2fs_truncate+0xd8/0x200 f2fs_iget+0x20c/0x5ac do_garbage_collect+0x5d0/0xf6c f2fs_gc+0x22c/0x6a4 f2fs_disable_checkpoint+0xc8/0x310 f2fs_fill_super+0x14bc/0x1764 mount_bdev+0x1b4/0x21c f2fs_mount+0x20/0x30 legacy_get_tree+0x50/0xbc vfs_get_tree+0x5c/0x1b0 do_new_mount+0x298/0x4cc path_mount+0x33c/0x5fc __arm64_sys_mount+0xcc/0x15c invoke_syscall+0x60/0x150 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec It is because inode.i_crypt_info is not initialized during below path: - mount - f2fs_fill_super - f2fs_disable_checkpoint - f2fs_gc - f2fs_iget - f2fs_truncate So, let's relocate truncation of preallocated blocks to f2fs_file_open(), after fscrypt_file_open().

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: sf-pdma: Add multithread support for a DMA channel When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 64 > /sys/module/dmatest/parameters/threads_per_chan % echo 10000 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [ 89.480664] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 89.488725] Oops [#1] [ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted 5.17.0-rc5 [ 89.509385] epc : vchan_find_desc+0x32/0x46 [ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6 This happens because of data race. Each thread rewrite channels's descriptor as soon as device_prep_dma_memcpy() is called. It leads to the situation when the driver thinks that it uses right descriptor that actually is freed or substituted for other one. With current fixes a descriptor changes its value only when it has been used. A new descriptor is acquired from vc->desc_issued queue that is already filled with descriptors that are ready to be sent. Threads have no direct access to DMA channel descriptor. Now it is just possible to queue a descriptor for further processing.

Vba32 Antivirus v3.36.0 is vulnerable to a Denial of Service vulnerability by triggering the 0x2220A7 IOCTL code of the Vba32m64.sys driver.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix a possible null pointer dereference In function lpfc_xcvr_data_show, the memory allocation with kmalloc might fail, thereby making rdp_context a null pointer. In the following context and functions that use this pointer, there are dereferencing operations, leading to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, use scnprintf to notify the user and return len.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: <TASK> wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path.