Northern.tech Mender Enterprise before 3.6.4 and 3.7.x before 3.7.4 has Weak Authentication.

Use of Password Hash Instead of Password for Authentication in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows an unprivileged remote attacker to use a password hash instead of an actual password to login to a valid user account via the REST interface.

An insufficient authorization vulnerability in web component of EPMM prior to 12.1.0.1 allows an unauthorized attacker within the network to execute arbitrary commands on the underlying operating system of the appliance.

An issue in Roadcute API v.1 allows a remote attacker to execute arbitrary code via the application exposing a password reset API endpoint that fails to validate the identity of the requester properly

Priority Web version 19.1.0.68, parameter manipulation on an unspecified end-point may allow authentication bypass.

In TOTOLINK EX1200T firmware 4.1.2cu.5215, an attacker can bypass login by sending a specific request through formLoginAuth.htm.

A vulnerability in the authentication logic of Wyze Cam Pan v2, Cam v2, Cam v3 allows an attacker to bypass login and control the devices. This issue affects: Wyze Cam Pan v2 versions prior to 4.49.1.47. Wyze Cam v2 versions prior to 4.9.8.1002. Wyze Cam v3 versions prior to 4.36.8.32.

TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. Under the certain conditions, an attacker may impersonate an administrator of the product. As a result, information may be obtained and/or the product's settings may be altered with the privilege of the administrator.

Cobbler, a Linux installation server that allows for rapid setup of network installation environments, has an improper authentication vulnerability starting in version 3.0.0 and prior to versions 3.2.3 and 3.3.7. `utils.get_shared_secret()` always returns `-1`, which allows anyone to connect to cobbler XML-RPC as user `''` password `-1` and make any changes. This gives anyone with network access to a cobbler server full control of the server. Versions 3.2.3 and 3.3.7 fix the issue.

The BrowserID (Mozilla Persona) module 7.x-1.x before 7.x-1.3 for Drupal allows remote attackers to hijack the authentication of arbitrary users via the audience identifier.

**UNSUPPORTED WHEN ASSIGNED** An issue was discovered in BMC Remedy Mid Tier 7.6.04. An unauthenticated remote attacker is able to access any user account without using any password. NOTE: This vulnerability only affects products that are no longer supported by the maintainer and the impacted version for this vulnerability is 7.6.04 only.

Error in 3GPP specification implementation in Exynos baseband prior to SMR Apr-2023 Release 1 allows incorrect handling of unencrypted message.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

This vulnerability exists in GajShield Data Security Firewall firmware versions prior to v4.28 (except v4.21) due to insecure default credentials which allows remote attacker to login as superuser by using default username/password via web-based management interface and/or exposed SSH port thereby enabling remote attackers to execute arbitrary commands with administrative/superuser privileges on the targeted systems. The vulnerability has been addressed by forcing the user to change their default password to a new non-default password.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

A vulnerability was found in SourceCodester Online Pizza Ordering System 1.0. It has been classified as critical. This affects an unknown part of the file admin/ajax.php?action=save_user of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The identifier VDB-223305 was assigned to this vulnerability.

Improper Authentication vulnerability in B&R Industrial Automation B&R VC4 (VNC-Server modules).  This vulnerability may allow an unauthenticated network-based attacker to bypass the authentication mechanism of the VC4 visualization on affected devices. The impact of this vulnerability depends on the functionality provided in the visualization. This issue affects B&R VC4: from 3.* through 3.96.7, from 4.0* through 4.06.7, from 4.1* through 4.16.3, from 4.2* through 4.26.8, from 4.3* through 4.34.6, from 4.4* through 4.45.1, from 4.5* through 4.45.3, from 4.7* through 4.72.9.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.

A vulnerability in the Security Assertion Markup Language (SAML) APIs of Cisco Catalyst SD-WAN Manager Software could allow an unauthenticated, remote attacker to gain unauthorized access to the application as an arbitrary user. This vulnerability is due to improper authentication checks for SAML APIs. An attacker could exploit this vulnerability by sending requests directly to the SAML API. A successful exploit could allow the attacker to generate an authorization token sufficient to gain access to the application.

The ZM Ajax Login & Register plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.0.2. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

Authentication Bypass by Alternate Name vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.

Authentication Bypass by Primary Weakness vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.

The vulnerability exists in Uniview IP Camera due to identification and authentication failure at its web-based management interface. A remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable device. Successful exploitation of this vulnerability could allow the attacker to gain complete control of the targeted device.

Improper Authentication in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

MaLion for Windows and Mac 5.0.0 to 5.2.1 allows remote attackers to bypass authentication to alter settings in Relay Service Server.

The Limit Login Attempts plugin before 1.7.1 for WordPress does not clear auth cookies upon a lockout, which might make it easier for remote attackers to conduct brute-force authentication attempts.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

sphider prior to 1.3.6, sphider-pro prior to 3.2, and sphider-plus prior to 3.2 allow authentication bypass

An issue was discovered in Mellium mellium.im/sasl before 0.3.1. When performing SCRAM-based SASL authentication, if the remote end advertises support for channel binding, no random nonce is generated (instead, the nonce is empty). This causes authentication to fail in the best case, but (if paired with a remote end that does not validate the length of the nonce) could lead to insufficient randomness being used during authentication.

SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program.

authentik is an open-source identity provider. Versions prior to 2022.11.2 and 2022.10.2 are vulnerable to unauthorized user creation and potential account takeover. With the default flows, unauthenticated users can create new accounts in authentik. If a flow exists that allows for email-verified password recovery, this can be used to overwrite the email address of admin accounts and take over their accounts. authentik 2022.11.2 and 2022.10.2 fix this issue. As a workaround, a policy can be created and bound to the `default-user-settings-flow flow` with the contents `return request.user.is_authenticated`.

A thread security vulnerability exists in the authentication process. Successful exploitation of this vulnerability may affect data integrity, confidentiality, and availability.

The web application portal of the Cobham EXPLORER 710, firmware version 1.07, allows unauthenticated access to port 5454. This could allow an unauthenticated, remote attacker to connect to this port via Telnet and execute 86 Attention (AT) commands, including some that provide unauthenticated, shell-like access to the device.

In maccms v10, an attacker can log in through /index.php/user/login in the "col" and "openid" parameters to gain privileges.

Improper authentication in Veeam Backup for Google Cloud v1.0 and v3.0 allows attackers to bypass authentication mechanisms.

Zoho ManageEngine PAM360 before build 5303 allows attackers to modify a few aspects of application state because of a filter bypass in which authentication is not required.

In GeoVision GV-ADR2701 cameras, an attacker could edit the login response to access the web application.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

Zoho ManageEngine Access Manager Plus before 4203 allows anyone to view a few data elements (e.g., access control details) and modify a few aspects of the application state.

Zoho ManageEngine ServiceDesk Plus MSP before 10.5 Build 10534 is vulnerable to unauthenticated remote code execution due to a filter bypass in which authentication is not required.

A vulnerability has been identified in SiPass integrated V2.76 (All versions), SiPass integrated V2.80 (All versions), SiPass integrated V2.85 (All versions), Siveillance Identity V1.5 (All versions), Siveillance Identity V1.6 (All versions < V1.6.284.0). Affected applications insufficiently limit the access to the internal user authentication service. This could allow an unauthenticated remote attacker to trigger several actions on behalf of valid user accounts.

The initial admin account setup wizard on Lexmark devices allow unauthenticated access to the “out of service erase” feature.

A flaw was found with the JWT token. A self-signed JWT token could be injected into the update manager and bypass the authentication process, thus could escalate privileges. This affects StarWind SAN and NAS build 1578 and StarWind Command Center build 6864.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

Authentication bypass using an alternate path or channel vulnerability in bingo!CMS version1.7.4.1 and earlier allows a remote unauthenticated attacker to upload an arbitrary file. As a result, an arbitrary script may be executed and/or a file may be altered.

An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

An improper authentication vulnerability has been reported to affect QNAP device running Photo Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Photo Station: Photo Station 6.0.20 ( 2022/02/15 ) and later Photo Station 5.7.16 ( 2022/02/11 ) and later Photo Station 5.4.13 ( 2022/02/11 ) and later

The authentication algorithm of the WebHMI portal is sound, but the implemented mechanism can be bypassed as the result of a separate weakness that is primary to the authentication error.

An authentication bypass vulnerability in Ivanti EPMM 11.10 and older, allows unauthorized users to access restricted functionality or resources of the application without proper authentication. This vulnerability is unique to CVE-2023-35078 announced earlier.

Tenda 11N with firmware version V5.07.33_cn suffers from an Authentication Bypass vulnerability.