authentik is an open-source Identity Provider. Prior to versions 2023.8.4 and 2023.10.2, when the default admin user has been deleted, it is potentially possible for an attacker to set the password of the default admin user without any authentication. authentik uses a blueprint to create the default admin user, which can also optionally set the default admin users' password from an environment variable. When the user is deleted, the `initial-setup` flow used to configure authentik after the first installation becomes available again. authentik 2023.8.4 and 2023.10.2 fix this issue. As a workaround, ensure the default admin user (Username `akadmin`) exists and has a password set. It is recommended to use a very strong password for this user, and store it in a secure location like a password manager. It is also possible to deactivate the user to prevent any logins as akadmin.

authentik is an open-source identity provider. When initialising a oauth2 flow with a `code_challenge` and `code_method` (thus requesting PKCE), the single sign-on provider (authentik) must check if there is a matching and existing `code_verifier` during the token step. Prior to versions 2023.10.4 and 2023.8.5, authentik checks if the contents of `code_verifier` is matching only when it is provided. When it is left out completely, authentik simply accepts the token request with out it; even when the flow was started with a `code_challenge`. authentik 2023.8.5 and 2023.10.4 fix this issue.

authentik is an open-source Identity Provider. Access restrictions assigned to an application were not checked when using the OAuth2 Device code flow. This could potentially allow users without the correct authorization to get OAuth tokens for an application and access it. This issue has been patched in version(s) 2024.6.0, 2024.2.4 and 2024.4.3.

authentik is an open-source identity provider. Redirect URIs in the OAuth2 provider in authentik are checked by RegEx comparison. When no Redirect URIs are configured in a provider, authentik will automatically use the first redirect_uri value received as an allowed redirect URI, without escaping characters that have a special meaning in RegEx. Similarly, the documentation did not take this into consideration either. Given a provider with the Redirect URIs set to https://foo.example.com, an attacker can register a domain fooaexample.com, and it will correctly pass validation. authentik 2024.8.5 and 2024.10.3 fix this issue. As a workaround, When configuring OAuth2 providers, make sure to escape any wildcard characters that are not intended to function as a wildcard, for example replace `.` with `\.`.

authentik is an open-source identity provider. A vulnerability that exists in versions prior to 2024.8.3 and 2024.6.5 allows bypassing password login by adding X-Forwarded-For header with an unparsable IP address, e.g. `a`. This results in a possibility of logging into any account with a known login or email address. The vulnerability requires the authentik instance to trust X-Forwarded-For header provided by the attacker, thus it is not reproducible from external hosts on a properly configured environment. The issue occurs due to the password stage having a policy bound to it, which skips the password stage if the Identification stage is setup to also contain a password stage. Due to the invalid X-Forwarded-For header, which does not get validated to be an IP Address early enough, the exception happens later and the policy fails. The default blueprint doesn't correctly set `failure_result` to `True` on the policy binding meaning that due to this exception the policy returns false and the password stage is skipped. Versions 2024.8.3 and 2024.6.5 fix this issue.

Authentik is an open-source Identity Provider. There is a bug in our implementation of PKCE that allows an attacker to circumvent the protection that PKCE offers. PKCE adds the code_challenge parameter to the authorization request and adds the code_verifier parameter to the token request. Prior to 2023.8.7 and 2023.10.7, a downgrade scenario is possible: if the attacker removes the code_challenge parameter from the authorization request, authentik will not do the PKCE check. Because of this bug, an attacker can circumvent the protection PKCE offers, such as CSRF attacks and code injection attacks. Versions 2023.8.7 and 2023.10.7 fix the issue.

authentik is an open-source identity provider. After authorizing access to a RAC endpoint, authentik creates a token which is used for a single connection and is sent to the client in the URL. This token is intended to only be valid for the session of the user who authorized the connection, however this check is missing in versions prior to 2025.6.3 and 2025.4.3. When, for example, using RAC during a screenshare, a malicious user could access the same session by copying the URL from the shown browser. authentik 2025.4.3 and 2025.6.3 fix this issue. As a workaround, it is recommended to decrease the duration a token is valid for (in the RAC Provider settings, set Connection expiry to `minutes=5` for example). The maintainers of authentik also recommend enabling the option Delete authorization on disconnect.

authentik is an open-source Identity Provider focused on flexibility and versatility. Versions prior to 2022.11.4 and 2022.10.4 are vulnerable to Improper Authentication. Token reuse in invitation URLs leads to access control bypass via the use of a different enrollment flow than in the one provided. The vulnerability allows an attacker that knows different invitation flows names (e.g. `enrollment-invitation-test` and `enrollment-invitation-admin`) via either different invite links or via brute forcing to signup via a single invitation url for any valid invite link received (it can even be a url for a third flow as long as it's a valid invite) as the token used in the `Invitations` section of the Admin interface does NOT change when a different `enrollment flow` is selected via the interface and it is NOT bound to the selected flow, so it will be valid for any flow when used. This issue is patched in authentik 2022.11.4,2022.10.4 and 2022.12.0. Only configurations that use invitations and have multiple enrollment flows with invitation stages that grant different permissions are affected. The default configuration is not vulnerable, and neither are configurations with a single enrollment flow. As a workaround, fixed data can be added to invitations which can be checked in the flow to deny requests. Alternatively, an identifier with high entropy (like a UUID) can be used as flow slug, mitigating the attack vector by exponentially decreasing the possibility of discovering other flows.

authentik is an open-source Identity provider focused on flexibility and versatility. In versions prior to 2022.10.4, and 2022.11.4, any authenticated user can create an arbitrary number of accounts through the default flows. This would circumvent any policy in a situation where it is undesirable for users to create new accounts by themselves. This may also affect other applications as these new basic accounts would exist throughout the SSO infrastructure. By default the newly created accounts cannot be logged into as no password reset exists by default. However password resets are likely to be enabled by most installations. This vulnerability pertains to the user context used in the default-user-settings-flow, /api/v3/flows/instances/default-user-settings-flow/execute/. This issue has been fixed in versions 2022.10.4 and 2022.11.4.

A vulnerability in the TP-Link Archer c20 router with firmware version V6.6_230412 and earlier permits unauthorized individuals to bypass the authentication of some interfaces under the /cgi directory. When adding Referer: http://tplinkwifi.net to the the request, it will be recognized as passing the authentication.

Logsign Unified SecOps Platform Missing Authentication Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the cluster HTTP API, which listens on TCP port 1924 by default when enabled. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24166.

Logsign Unified SecOps Platform Missing Authentication Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the cluster HTTP API, which listens on TCP port 1924 when enabled. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24169.

A vulnerability has been identified in SINAMICS S200 (All versions with serial number beginning with SZVS8, SZVS9, SZVS0 or SZVSN and the FS number is 02). The affected device contains an unlocked bootloader. This security oversight enables attackers to inject malicious code, or install untrusted firmware. The intrinsic security features designed to protect against data manipulation and unauthorized access are compromised when the bootloader is not secured.

Computing For Good's Basic Laboratory Information System (also known as C4G BLIS) version 3.4 and earlier suffers from an instance of CWE-284, "Improper Access Control." As a result, an unauthenticated user may change the password of any administrator-level user.

The Lifeline Donation plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2.6. This is due to insufficient verification on the user being supplied during the checkout through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

In Totolink A3100R V5.9c.4577, multiple pages can be read by curl or Burp Suite without authentication. Additionally, admin configurations can be set without cookies.

An authentication bypass vulnerability in anji-plus AJ-Report up to v1.4.2 allows unauthenticated attackers to execute arbitrary code via a crafted URL.

upgrademysqlstatus in databases/views.py in CyberPanel (aka Cyber Panel) before 5b08cd6 allows remote attackers to bypass authentication and execute arbitrary commands via /dataBases/upgrademysqlstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

Emerson Dixell XWEB-500 products are affected by arbitrary file write vulnerability in /cgi-bin/logo_extra_upload.cgi, /cgi-bin/cal_save.cgi, and /cgi-bin/lo_utils.cgi. An attacker will be able to write any file on the target system without any kind of authentication mechanism, and this can lead to denial of service and potentially remote code execution. Note: the product has not been supported since 2018 and should be removed or replaced

In Terramaster F4-210, F2-210 TOS 4.2.X (4.2.15-2107141517), an attacker can self-sign session cookies by knowing the target's MAC address and the user's password hash. Guest users (disabled by default) can be abused using a null/empty hash and allow an unauthenticated attacker to login as guest.

ONTAP Select Deploy administration utility versions 2.12 & 2.12.1 ship with an HTTP service bound to the network allowing unauthenticated remote attackers to perform administrative actions.

Improper Authentication vulnerability in Elementor Elementor Website Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Elementor Website Builder: from n/a through 3.16.4.

AVTECH AVN801 DVR has a security bypass via the administration login captcha

Authentication Bypass Using an Alternate Path or Channel vulnerability in MaanTheme MaanStore API allows Authentication Bypass.This issue affects MaanStore API: from n/a through 1.0.1.

Zoho ManageEngine Access Manager Plus before 4203 allows anyone to view a few data elements (e.g., access control details) and modify a few aspects of the application state.

A vulnerability was found in Emlog Pro 2.3.4. It has been classified as problematic. This affects an unknown part of the component Cookie Handler. The manipulation of the argument AuthCookie leads to improper authentication. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The identifier VDB-264741 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Zoho ManageEngine PAM360 before build 5303 allows attackers to modify a few aspects of application state because of a filter bypass in which authentication is not required.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Stacks Stacks Mobile App Builder stacks-mobile-app-builder allows Authentication Bypass.This issue affects Stacks Mobile App Builder: from n/a through 5.2.3.

Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access or elevated privileges within the application. Exploitation of this issue does not require user interaction.

An exploitable vulnerability exists in the generation of authentication token functionality of Circle with Disney. Specially crafted network packets can cause a valid authentication token to be returned to the attacker resulting in authentication bypass. An attacker can send a series of packets to trigger this vulnerability.

The authentication algorithm of the WebHMI portal is sound, but the implemented mechanism can be bypassed as the result of a separate weakness that is primary to the authentication error.

An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters.

The impacted products, when configured to use SSO, are affected by an improper authentication vulnerability. This vulnerability allows the application to accept manual entry of any active directory (AD) account provisioned in the application without supplying a password, resulting in access to the application as the supplied AD account, with all associated privileges.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

A vulnerability is in the 'wx.html' page of the WAVLINK AC1200, version WAVLINK-A42W-1.27.6-20180418, which can allow a remote attacker to access this page without any authentication. When an unauthorized user accesses this page directly, it connects to this device as a friend of the device owner.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

Sharp and Toshiba Tec MFPs improperly process HTTP authentication requests, resulting in an authentication bypass vulnerability.

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

An exploitable authentication bypass vulnerability exists in the API daemon of Circle with Disney running firmware 2.0.1. A specially crafted token can bypass the authentication routine of the Apid binary, causing the device to grant unintended administrative access. An attacker needs network connectivity to the device to trigger this vulnerability.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

The component controlla_login function in HotelDruid Hotel Management Software v3.0.3 generates a predictable session token, allowing attackers to bypass authentication via bruteforce attacks.

Fresenius Kabi Vigilant Software Suite (Mastermed Dashboard) version 2.0.1.3 allows user input to be validated on the client side without authentication by the server. The server should not rely on the correctness of the data because users might not support or block JavaScript or intentionally bypass the client-side checks. An attacker with knowledge of the service user could circumvent the client-side control and login with service privileges.

An issue was discovered in Talend Data Catalog before 7.3-20210930. After setting up SAML/OAuth, authentication is not correctly enforced on the native login page. Any valid user from the SAML/OAuth provider can be used as the username with an arbitrary password, and login will succeed.

The web application uses a weak authentication mechanism to verify that a request is coming from an authenticated and authorized resource.