D-Link DIR-816 A2V1.1.0B05 was found to contain a command injection in iptablesWebsFilterRun, which allows remote attackers to execute arbitrary commands via shell.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been rated as critical. This issue affects the function sub_454F2C. The manipulation of the argument sysCmd leads to command injection. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this vulnerability is the function formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-605L 2.13B01. Affected is the function wake_on_lan. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DSR-250 3.17 devices. Insufficient validation of configuration file checksums could allow a remote, authenticated attacker to inject arbitrary crontab entries into saved configurations before uploading. These entries are executed as root.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04. It has been declared as critical. This vulnerability affects the function wake_on_lan. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-619L 2.04B04. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

An issue in D-Link DIR-842V2 v1.0.3 allows attackers to execute arbitrary commands via importing a crafted file.

D-Link DIR-842V2 v1.0.3 was discovered to contain a command injection vulnerability via the iperf3 diagnostics function.

A vulnerability, which was classified as critical, was found in D-Link DIR-600L up to 2.07B01. This affects the function formLogin. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been declared as critical. Affected by this vulnerability is the function formWlSiteSurvey. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSL-224 firmware version 3.0.10 allows post authentication command execution via an unspecified method.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been classified as critical. Affected is the function formSetWAN_Wizard534. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L B1 2.06. This issue affects the function formAdvFirewall of the file /goform/formAdvFirewall. The manipulation of the argument curTime leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formWlanGuestSetup.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formSetWanDhcpplus.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSchedule.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetWanDhcpplus.

A vulnerability was found in D-Link DIR-600L up to 2.07B01. It has been rated as critical. Affected by this issue is the function formSetWanL2TP. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-600L up to 2.07B01. This affects the function formSysCmd. The manipulation of the argument host leads to command injection. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600L up to 2.07B01 and classified as critical. This issue affects the function formSetLog. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-600L up to 2.07B01. This vulnerability affects the function wake_on_lan. The manipulation of the argument host leads to command injection. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been classified as critical. This affects the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is a stack-based buffer overflow in the httpd binary. It allows an authenticated user to execute arbitrary code via a POST to ntp_sync.cgi with a sufficiently long parameter ntp_server.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the ntp_server parameter in an ntp_sync.cgi POST request.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the wan_connected parameter at /goform/formEasySetupWizard3.