In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diAlloc Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes [WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Avoid reading beyond LUT array When the floor LUT index (drm_fixp2int(lut_index) is the last index of the array the ceil LUT index will point to an entry beyond the array. Make sure we guard against it and use the value of the floor LUT index. v3: - Drop bits from commit description that didn't contribute anything of value

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] u ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: nfc: Fix use-after-free in local_cleanup() Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301)

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Return the firmware result upon destroying QP/RQ Previously when destroying a QP/RQ, the result of the firmware destruction function was ignored and upper layers weren't informed about the failure. Which in turn could lead to various problems since when upper layer isn't aware of the failure it continues its operation thinking that the related QP/RQ was successfully destroyed while it actually wasn't, which could lead to the below kernel WARN. Currently, we return the correct firmware destruction status to upper layers which in case of the RQ would be mlx5_ib_destroy_wq() which was already capable of handling RQ destruction failure or in case of a QP to destroy_qp_common(), which now would actually warn upon qp destruction failure. WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0f RSP: 0018:ffff8881533e3e78 EFLAGS: 00010287 RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000 RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0 RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009 R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780 R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000 FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_uverbs_close+0x1a/0x90 [ib_uverbs] __fput+0x82/0x230 task_work_run+0x59/0x90 exit_to_user_mode_prepare+0x138/0x140 syscall_exit_to_user_mode+0x1d/0x50 ? __x64_sys_close+0xe/0x40 do_syscall_64+0x4a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8be3ae0abb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44 RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abb RDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005 RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8 R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a potential double-free in fs_any_create_groups When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups().

In the Linux kernel, the following vulnerability has been resolved: media: netup_unidvb: fix use-after-free at del_timer() When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync().

In the Linux kernel, the following vulnerability has been resolved: ice: copy last block omitted in ice_get_module_eeprom() ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ ....

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix gtk offload status event locking The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after failed write When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: davinci: Fix clk use after free The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used.

In the Linux kernel, the following vulnerability has been resolved: net: atlantic: eliminate double free in error handling logic Driver has a logic leak in ring data allocation/free, where aq_ring_free could be called multiple times on same ring, if system is under stress and got memory allocation error. Ring pointer was used as an indicator of failure, but this is not correct since only ring data is allocated/deallocated. Ring itself is an array member. Changing ring allocation functions to return error code directly. This simplifies error handling and eliminates aq_ring_free on higher layer.

In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid potential UAF in nvmet_req_complete() An nvme target ->queue_response() operation implementation may free the request passed as argument. Such implementation potentially could result in a use after free of the request pointer when percpu_ref_put() is called in nvmet_req_complete(). Avoid such problem by using a local variable to save the sq pointer before calling __nvmet_req_complete(), thus avoiding dereferencing the req pointer after that function call.

In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix the crash in hot unplug with vp_vdpa While unplugging the vp_vdpa device, it triggers a kernel panic The root cause is: vdpa_mgmtdev_unregister() will accesses modern devices which will cause a use after free. So need to change the sequence in vp_vdpa_remove [ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014 [ 195.004012] #PF: supervisor read access in kernel mode [ 195.004486] #PF: error_code(0x0000) - not-present page [ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0 [ 195.005578] Oops: 0000 1 PREEMPT SMP PTI [ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1 [ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown [ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 195.008059] RIP: 0010:ioread8+0x31/0x80 [ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7 [ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292 [ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0 [ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014 [ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68 [ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120 [ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805 [ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000 [ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0 [ 195.015741] PKRU: 55555554 [ 195.016001] Call Trace: [ 195.016233] <TASK> [ 195.016434] vp_modern_get_status+0x12/0x20 [ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa] [ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa] [ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net] [ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net] [ 195.018618] virtio_dev_remove+0x3d/0x90 [ 195.018986] device_release_driver_internal+0x1aa/0x230 [ 195.019466] bus_remove_device+0xd8/0x150 [ 195.019841] device_del+0x18b/0x3f0 [ 195.020167] ? kernfs_find_ns+0x35/0xd0 [ 195.020526] device_unregister+0x13/0x60 [ 195.020894] unregister_virtio_device+0x11/0x20 [ 195.021311] device_release_driver_internal+0x1aa/0x230 [ 195.021790] bus_remove_device+0xd8/0x150 [ 195.022162] device_del+0x18b/0x3f0 [ 195.022487] device_unregister+0x13/0x60 [ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa] [ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa] [ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa] [ 195.024115] bus_for_each_dev+0x78/0xc0 [ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa] [ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa] [ 195.025353] pci_device_remove+0x36/0xa0 [ 195.025719] device_release_driver_internal+0x1aa/0x230 [ 195.026201] pci_stop_bus_device+0x6c/0x90 [ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20 [ 195.027039] disable_slot+0x49/0x90 [ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90 [ 195.027832] hotplug_event+0xea/0x210 [ 195.028171] ? hotplug_event+0x210/0x210 [ 195.028535] acpiphp_hotplug_notify+0x22/0x80 [ 195.028942] ? hotplug_event+0x210/0x210 [ 195.029303] acpi_device_hotplug+0x8a/0x1d0 [ 195.029690] acpi_hotplug_work_fn+0x1a/0x30 [ 195.030077] process_one_work+0x1e8/0x3c0 [ 195.030451] worker_thread+0x50/0x3b0 [ 195.030791] ? rescuer_thread+0x3a0/0x3a0 [ 195.031165] kthread+0xd9/0x100 [ 195.031459] ? kthread_complete_and_exit+0x20/0x20 [ 195.031899] ret_from_fork+0x22/0x30 [ 195.032233] </TASK>

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix invalid page access after closing deferred I/O devices When a fbdev with deferred I/O is once opened and closed, the dirty pages still remain queued in the pageref list, and eventually later those may be processed in the delayed work. This may lead to a corruption of pages, hitting an Oops. This patch makes sure to cancel the delayed work and clean up the pageref list at closing the device for addressing the bug. A part of the cleanup code is factored out as a new helper function that is called from the common fb_release().

In the Linux kernel, the following vulnerability has been resolved: netlink: prevent potential spectre v1 gadgets Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential bit_17 double-free A userspace with multiple threads racing I915_GEM_SET_TILING to set the tiling to I915_TILING_NONE could trigger a double free of the bit_17 bitmask. (Or conversely leak memory on the transition to tiled.) Move allocation/free'ing of the bitmask within the section protected by the obj lock. [tursulin: Correct fixes tag and added cc stable.] (cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e)

A use-after-free vulnerability in the Linux kernel's fs/smb/client component can be exploited to achieve local privilege escalation. In case of an error in smb3_fs_context_parse_param, ctx->password was freed but the field was not set to NULL which could lead to double free. We recommend upgrading past commit e6e43b8aa7cd3c3af686caf0c2e11819a886d705.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays.

IBM CICS TX Standard 11.1 and IBM CICS TX Advanced 10.1 and 11.1  could allow a local user to execute arbitrary code on the system due to failure to handle DNS return requests by the gethostbyname function.

In the Linux kernel, the following vulnerability has been resolved: media: gspca: cpia1: shift-out-of-bounds in set_flicker Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free Fix potential use-after-free in l2cap_le_command_rej.

In the Linux kernel, the following vulnerability has been resolved: clk: imx: scu: use _safe list iterator to avoid a use after free This loop is freeing "clk" so it needs to use list_for_each_entry_safe(). Otherwise it dereferences a freed variable to get the next item on the loop.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems() nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the number of MBSSID elements in the nested netlink attribute attrs, which can lead to an integer overflow if a user of the nl80211 interface specifies 256 or more elements in the corresponding attribute in userspace. The integer overflow can lead to a heap buffer overflow as num_elems determines the size of the trailing array in elems, and this array is thereafter written to for each element in attrs. Note that this vulnerability only affects devices with the wiphy->mbssid_max_interfaces member set for the wireless physical device struct in the device driver, and can only be triggered by a process with CAP_NET_ADMIN capabilities. Fix this by checking for a maximum of 255 elements in attrs.

In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free Struct pcie_link_state->downstream is a pointer to the pci_dev of function 0. Previously we retained that pointer when removing function 0, and subsequent ASPM policy changes dereferenced it, resulting in a use-after-free warning from KASAN, e.g.: # echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove # echo powersave > /sys/module/pcie_aspm/parameters/policy BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500 Call Trace: kasan_report+0xae/0xe0 pcie_config_aspm_link+0x42d/0x500 pcie_aspm_set_policy+0x8e/0x1a0 param_attr_store+0x162/0x2c0 module_attr_store+0x3e/0x80 PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM Control value in all functions of multi-function devices. Disable ASPM and free the pcie_link_state when any child function is removed so we can discard the dangling pcie_link_state->downstream pointer and maintain the same ASPM Control configuration for all functions. [bhelgaas: commit log and comment]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove.

In the Linux kernel, the following vulnerability has been resolved: ip_vti: fix potential slab-use-after-free in decode_session6 When ip_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ip_vti device sends IPv6 packets. As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex syzbot is reporting circular locking dependency between cpu_hotplug_lock and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") replaced atomic_inc() in freezer_apply_state() with static_branch_inc() which holds cpu_hotplug_lock. cpu_hotplug_lock => cgroup_threadgroup_rwsem => freezer_mutex cgroup_file_write() { cgroup_procs_write() { __cgroup_procs_write() { cgroup_procs_write_start() { cgroup_attach_lock() { cpus_read_lock() { percpu_down_read(&cpu_hotplug_lock); } percpu_down_write(&cgroup_threadgroup_rwsem); } } cgroup_attach_task() { cgroup_migrate() { cgroup_migrate_execute() { freezer_attach() { mutex_lock(&freezer_mutex); (...snipped...) } } } } (...snipped...) } } } freezer_mutex => cpu_hotplug_lock cgroup_file_write() { freezer_write() { freezer_change_state() { mutex_lock(&freezer_mutex); freezer_apply_state() { static_branch_inc(&freezer_active) { static_key_slow_inc() { cpus_read_lock(); static_key_slow_inc_cpuslocked(); cpus_read_unlock(); } } } mutex_unlock(&freezer_mutex); } } } Swap locking order by moving cpus_read_lock() in freezer_apply_state() to before mutex_lock(&freezer_mutex) in freezer_change_state().

In the Linux kernel, the following vulnerability has been resolved: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mpls: Fix warning during failed attribute validation The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix the error handler of rfkill config When the core rfkill config throws error, it should free the allocated resources. Currently it is not freeing the core pdev create resources. Avoid this issue by calling the core pdev destroy in the error handler of core rfkill config. Found this issue in the code review and it is compile tested only.

In the Linux kernel, the following vulnerability has been resolved: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_read (drivers/tty/vt/vc_screen.c:415) vfs_read (fs/read_write.c:468 fs/read_write.c:450) ... </TASK> Allocated by task 1191: ... kmalloc_trace (mm/slab_common.c:1069) vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720 drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108) con_install (drivers/tty/vt/vt.c:3383) tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413 drivers/tty/tty_io.c:1390) tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:883) vfs_open (fs/open.c:1014) ... Freed by task 1548: ... kfree (mm/slab_common.c:1021) vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2776) ... The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of 1024-byte region [ffff888113747800, ffff888113747c00) The buggy address belongs to the physical page: page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x113740 head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: loop: Fix use-after-free issues do_req_filebacked() calls blk_mq_complete_request() synchronously or asynchronously when using asynchronous I/O unless memory allocation fails. Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor 'rq' after do_req_filebacked() finished unless we are sure that the request has not yet been completed. This patch fixes the following kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054 Call trace: css_put.42938+0x1c/0x1ac loop_process_work+0xc8c/0xfd4 loop_rootcg_workfn+0x24/0x34 process_one_work+0x244/0x558 worker_thread+0x400/0x8fc kthread+0x16c/0x1e0 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: of: Fix double free in of_parse_phandle_with_args_map In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path.

In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Set new vector length before reallocating As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent use-after-free by freeing the cfile later In smb2_compound_op we have a possible use-after-free which can cause hard to debug problems later on. This was revealed during stress testing with KASAN enabled kernel. Fixing it by moving the cfile free call to a few lines below, after the usage.

In Zsh before 5.8, attackers able to execute commands can regain privileges dropped by the --no-PRIVILEGED option. Zsh fails to overwrite the saved uid, so the original privileges can be restored by executing MODULE_PATH=/dir/with/module zmodload with a module that calls setuid().

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add validity check for db_maxag and db_agpref Both db_maxag and db_agpref are used as the index of the db_agfree array, but there is currently no validity check for db_maxag and db_agpref, which can lead to errors. The following is related bug reported by Syzbot: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20 index 7936 is out of range for type 'atomic_t[128]' Add checking that the values of db_maxag and db_agpref are valid indexes for the db_agfree array.

In the Linux kernel, the following vulnerability has been resolved: HID: nvidia-shield: Reference hid_device devm allocation of input_dev name Use hid_device for devm allocation of the input_dev name to avoid a use-after-free. input_unregister_device would trigger devres cleanup of all resources associated with the input_dev, free-ing the name. The name would subsequently be used in a uevent fired at the end of unregistering the input_dev.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: prevent potential string overflow The dev->id value comes from ida_alloc() so it's a number between zero and INT_MAX. If it's too high then these sprintf()s will overflow.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug. Set the tcp_sw_host->session after we have completed session creation and can no longer fail.

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix slab-use-after-free in decode_session6 When the xfrm device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when the xfrm device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff8881111458ef by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 xfrmi_xmit+0x173/0x1ca0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:intel_idle_hlt+0x23/0x30 Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4 RSP: 0018:ffffc90000197d78 EFLAGS: 00000246 RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5 RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50 RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter_state+0xd3/0x6f0 cpuidle_enter+0x4e/0xa0 do_idle+0x2fe/0x3c0 cpu_startup_entry+0x18/0x20 start_secondary+0x200/0x290 secondary_startup_64_no_verify+0x167/0x16b </TASK> Allocated by task 939: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 inet6_ifa_notify+0x118/0x230 __ipv6_ifa_notify+0x177/0xbe0 addrconf_dad_completed+0x133/0xe00 addrconf_dad_work+0x764/0x1390 process_one_work+0xa32/0x16f0 worker_thread+0x67d/0x10c0 kthread+0x344/0x440 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888111145800 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 239 bytes inside of freed 640-byte region [ffff888111145800, ffff888111145a80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: mptcp: use the workqueue to destroy unaccepted sockets Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initialization

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path() snd_hda_get_connections() can return a negative error code. It may lead to accessing 'conn' array at a negative index. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output syzkaller reportes a KASAN issue with stack-out-of-bounds. The call trace is as follows: dump_stack+0x9c/0xd3 print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 __perf_event_header__init_id+0x34/0x290 perf_event_header__init_id+0x48/0x60 perf_output_begin+0x4a4/0x560 perf_event_bpf_output+0x161/0x1e0 perf_iterate_sb_cpu+0x29e/0x340 perf_iterate_sb+0x4c/0xc0 perf_event_bpf_event+0x194/0x2c0 __bpf_prog_put.constprop.0+0x55/0xf0 __cls_bpf_delete_prog+0xea/0x120 [cls_bpf] cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf] process_one_work+0x3c2/0x730 worker_thread+0x93/0x650 kthread+0x1b8/0x210 ret_from_fork+0x1f/0x30 commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") use on-stack struct perf_sample_data of the caller function. However, perf_event_bpf_output uses incorrect parameter to convert small-sized data (struct perf_bpf_event) into large-sized data (struct perf_sample_data), which causes memory overwriting occurs in __perf_event_header__init_id.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: Fix UAF in bcm_proc_show() BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80 Read of size 8 at addr ffff888155846230 by task cat/7862 CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xd5/0x150 print_report+0xc1/0x5e0 kasan_report+0xba/0xf0 bcm_proc_show+0x969/0xa80 seq_read_iter+0x4f6/0x1260 seq_read+0x165/0x210 proc_reg_read+0x227/0x300 vfs_read+0x1d5/0x8d0 ksys_read+0x11e/0x240 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Allocated by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x9e/0xa0 bcm_sendmsg+0x264b/0x44e0 sock_sendmsg+0xda/0x180 ____sys_sendmsg+0x735/0x920 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x161/0x1c0 slab_free_freelist_hook+0x119/0x220 __kmem_cache_free+0xb4/0x2e0 rcu_core+0x809/0x1bd0 bcm_op is freed before procfs entry be removed in bcm_release(), this lead to bcm_proc_show() may read the freed bcm_op.