In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit() There is a global-out-of-bounds reported by KASAN: BUG: KASAN: global-out-of-bounds in _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411 CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D 6.1.0-rc8+ #144 e15588508517267d37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), Call Trace: <TASK> ... kasan_report+0xbb/0x1c0 _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae] rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae] ... </TASK> The root cause of the problem is that the comparison order of "prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The _rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two strings from tail to head, which causes the problem. In the _rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet this requirement by carefully designing the comparison order. For example, "pregulation" and "pbandwidth" are compared in order of length from small to large, first is 3 and last is 4. However, the comparison order of "prate_section" dose not obey such order requirement, therefore when "prate_section" is "HT", when comparing from tail to head, it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As mentioned above, the _rtl8812ae_eq_n_byte() has the same function as strcmp(), so just strcmp() is enough. Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely. Although it can be fixed by adjusting the comparison order of "prate_section", this may cause the value of "rate_section" to not be from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver from staging to regular tree, but also added setting txpower limit function during the driver config phase, so the problem was introduced by this commit.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end t ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dlm: fix plock invalid read This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields. To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set. Example of the KASAN output which showed the invalid read: [ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe.

In the Linux kernel, the following vulnerability has been resolved: ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111 The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix wild-memory-access in register_synth_event() In register_synth_event(), if set_synth_event_print_fmt() failed, then both trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event __unregister_trace_event (second call) Fix the bug by avoiding to call the second __unregister_trace_event() by checking if the first one is called. general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted 6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP: 0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000 RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122 R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250 synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test] synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: bpf: Don't use tnum_range on array range checking for poke descriptors Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4 commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command.

In the Linux kernel, the following vulnerability has been resolved: habanalabs/gaudi: fix shift out of bounds When validating NIC queues, queue offset calculation must be performed only for NIC queues.

In the Linux kernel, the following vulnerability has been resolved: can: dev: fix skb drop check In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. [mkl: patch pch_can, too]

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type. Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes. Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data. In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end. In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.

In the Linux kernel, the following vulnerability has been resolved: um: Fix out-of-bounds read in LDT setup syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes. ================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump_stack+0x3a/0x43 dump_stack_lvl+0x1f/0x27 print_report.cold+0xdb/0xf81 kasan_report+0x119/0x1f0 kasan_check_range+0x3a3/0x440 memcpy+0x52/0x140 syscall_stub_data+0x70/0xe0 write_ldt_entry+0xac/0x190 init_new_ldt+0x515/0x960 init_new_context+0x2c4/0x4d0 mm_init.constprop.0+0x5ed/0x760 mm_alloc+0x118/0x170 0x60033f48 do_one_initcall+0x1d7/0x860 0x60003e7b kernel_init+0x6e/0x3d4 new_thread_handler+0x1e7/0x2c0 The buggy address belongs to stack of task swapper/1 and is located at offset 64 in frame: init_new_ldt+0x0/0x960 This frame has 2 objects: [32, 40) 'addr' [64, 80) 'desc' ==================================================================

In the Linux kernel, the following vulnerability has been resolved: comedi: aio_iiro_16: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & 0xdcfc) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix oops in write-retry from mis-resetting the subreq iterator Fix the resetting of the subrequest iterator in netfs_retry_write_stream() to use the iterator-reset function as the iterator may have been shortened by a previous retry. In such a case, the amount of data to be written by the subrequest is not "subreq->len" but "subreq->len - subreq->transferred". Without this, KASAN may see an error in iov_iter_revert(): BUG: KASAN: slab-out-of-bounds in iov_iter_revert lib/iov_iter.c:633 [inline] BUG: KASAN: slab-out-of-bounds in iov_iter_revert+0x443/0x5a0 lib/iov_iter.c:611 Read of size 4 at addr ffff88802912a0b8 by task kworker/u32:7/1147 CPU: 1 UID: 0 PID: 1147 Comm: kworker/u32:7 Not tainted 6.15.0-rc6-syzkaller-00052-g9f35e33144ae #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound netfs_write_collection_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 iov_iter_revert lib/iov_iter.c:633 [inline] iov_iter_revert+0x443/0x5a0 lib/iov_iter.c:611 netfs_retry_write_stream fs/netfs/write_retry.c:44 [inline] netfs_retry_writes+0x166d/0x1a50 fs/netfs/write_retry.c:231 netfs_collect_write_results fs/netfs/write_collect.c:352 [inline] netfs_write_collection_worker+0x23fd/0x3830 fs/netfs/write_collect.c:374 process_one_work+0x9cf/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>

In the Linux kernel, the following vulnerability has been resolved: bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Avoid cross-chip syncing of VLAN filtering Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type Accessing enums using integer would result in array out of bounds access on platforms like aarch64 where sizeof(long) is 8 compared to enum size which is 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: vt: Clear selection before changing the font When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called.

In the Linux kernel, the following vulnerability has been resolved: riscv: process: fix kernel info leakage thread_struct's s[12] may contain random kernel memory content, which may be finally leaked to userspace. This is a security hole. Fix it by clearing the s[12] array in thread_struct when fork. As for kthread case, it's better to clear the s[12] array as well.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix information leak in btrfs_ioctl_logical_to_ino() Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation.

In the Linux kernel, the following vulnerability has been resolved: uaccess: fix integer overflow on access_ok() Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not. Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison.

In the Linux kernel, the following vulnerability has been resolved: bpf: Use VM_MAP instead of VM_ALLOC for ringbuf After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user

An Out-of-Bounds Read was discovered in arch/arm/mach-footbridge/personal-pci.c in the Linux kernel through 5.12.11 because of the lack of a check for a value that shouldn't be negative, e.g., access to element -2 of an array, aka CID-298a58e165e4.

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies syzbot reported unsafe calls to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078 CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfd/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f7fac07fd89 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89 RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

In the Linux kernel, the following vulnerability has been resolved: ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized.

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

In the Linux kernel, the following vulnerability has been resolved: ASoC: hdmi-codec: Fix OOB memory accesses Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: csum: Fix OoB access in IP checksum code for negative lengths Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system") would cause an undefined shift and an out-of-bounds read. Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code for negative lengths") fixes the same issue on ARM64.

An issue was discovered in the Linux kernel before 6.2. The ntfs3 subsystem does not properly check for correctness during disk reads, leading to an out-of-bounds read in ntfs_set_ea in fs/ntfs3/xattr.c.

NVIDIA GPU Display Driver for Linux, all versions, contains a vulnerability in the kernel mode layer (nvidia.ko) in which it does not completely honor operating system file system permissions to provide GPU device-level isolation, which may lead to denial of service or information disclosure.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) KASAN reports: [ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) [ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0 [ 4.683454][ T0] [ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1 [ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016 [ 4.703196][ T0] Call Trace: [ 4.706334][ T0] <TASK> [ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) after converting the type of the first argument (@nr, bit number) of arch_test_bit() from `long` to `unsigned long`[0]. Under certain conditions (for example, when ACPI NUMA is disabled via command line), pxm_to_node() can return %NUMA_NO_NODE (-1). It is valid 'magic' number of NUMA node, but not valid bit number to use in bitops. node_online() eventually descends to test_bit() without checking for the input, assuming it's on caller side (which might be good for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads to an insane array index when calculating bit position in memory. For now, add an explicit check for @node being not %NUMA_NO_NODE before calling test_bit(). The actual logics didn't change here at all. [0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number

In the Linux kernel, the following vulnerability has been resolved: sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating that the cpuset will just use the effective CPUs of its parent. So cpuset_can_attach() can call task_can_attach() with an empty mask. This can lead to cpumask_any_and() returns nr_cpu_ids causing the call to dl_bw_of() to crash due to percpu value access of an out of bound CPU value. For example: [80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0 : [80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0 : [80468.207946] Call Trace: [80468.208947] cpuset_can_attach+0xa0/0x140 [80468.209953] cgroup_migrate_execute+0x8c/0x490 [80468.210931] cgroup_update_dfl_csses+0x254/0x270 [80468.211898] cgroup_subtree_control_write+0x322/0x400 [80468.212854] kernfs_fop_write_iter+0x11c/0x1b0 [80468.213777] new_sync_write+0x11f/0x1b0 [80468.214689] vfs_write+0x1eb/0x280 [80468.215592] ksys_write+0x5f/0xe0 [80468.216463] do_syscall_64+0x5c/0x80 [80468.224287] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix that by using effective_cpus instead. For cgroup v1, effective_cpus is the same as cpus_allowed. For v2, effective_cpus is the real cpumask to be used by tasks within the cpuset anyway. Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to reflect the change. In addition, a check is added to task_can_attach() to guard against the possibility that cpumask_any_and() may return a value >= nr_cpu_ids.

In the Linux kernel, the following vulnerability has been resolved: md-raid10: fix KASAN warning There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: module: fix [e_shstrndx].sh_size=0 OOB access It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:load_module+0x19b/0x2391 [rebased patch onto modules-next]

An issue was discovered in the Linux kernel through 5.11.3. drivers/scsi/scsi_transport_iscsi.c is adversely affected by the ability of an unprivileged user to craft Netlink messages.

In the Linux kernel, the following vulnerability has been resolved: net: fix information leakage in /proc/net/ptype In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix refcount leak in amd_pmc_probe pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this.

An issue was discovered in the Linux kernel 3.16 through 5.5.6. set_fdc in drivers/block/floppy.c leads to a wait_til_ready out-of-bounds read because the FDC index is not checked for errors before assigning it, aka CID-2e90ca68b0d2.

There is a use-after-free vulnerability in the Linux kernel through 5.5.2 in the n_tty_receive_buf_common function in drivers/tty/n_tty.c.

In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access.

In the Linux kernel, the following vulnerability has been resolved: comedi: pcl812: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & board->irq_bits) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not attempt to read past "commit" When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() syzbot reports an UBSAN issue as below: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10 index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]') CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429 get_nid fs/f2fs/node.h:381 [inline] f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093 aio_write+0x56b/0x7c0 fs/aio.c:1633 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052 __do_sys_io_submit fs/aio.c:2111 [inline] __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f238798cde9 index 18446744073709550692 (decimal, unsigned long long) = 0xfffffffffffffc64 (hexadecimal, unsigned long long) = -924 (decimal, long long) In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to access .i_nid[-924], it means both offset[0] and level should zero. The possible case should be in f2fs_do_truncate_blocks(), we try to truncate inode size to zero, however, dn.ofs_in_node is zero and dn.node_page is not an inode page, so it fails to truncate inode page, and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result in this issue. if (dn.ofs_in_node || IS_INODE(dn.node_page)) { f2fs_truncate_data_blocks_range(&dn, count); free_from += count; } I guess the reason why dn.node_page is not an inode page could be: there are multiple nat entries share the same node block address, once the node block address was reused, f2fs_get_node_page() may load a non-inode block. Let's add a sanity check for such condition to avoid out-of-bounds access issue.

A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.

fs/namei.c in the Linux kernel before 5.5 has a may_create_in_sticky use-after-free, which allows local users to cause a denial of service (OOPS) or possibly obtain sensitive information from kernel memory, aka CID-d0cb50185ae9. One attack vector may be an open system call for a UNIX domain socket, if the socket is being moved to a new parent directory and its old parent directory is being removed.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to > the RPC read layers") on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly.