In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix use after free for wext Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free Fix potential use-after-free in l2cap_le_command_rej.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent use-after-free by freeing the cfile later In smb2_compound_op we have a possible use-after-free which can cause hard to debug problems later on. This was revealed during stress testing with KASAN enabled kernel. Fixing it by moving the cfile free call to a few lines below, after the usage.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix warning and UAF when destroy the MR list If the MR allocate failed, the MR recovery work not initialized and list not cleared. Then will be warning and UAF when release the MR: WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110 CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82 RIP: 0010:__flush_work.isra.0+0xf7/0x110 Call Trace: <TASK> __cancel_work_timer+0x2ba/0x2e0 smbd_destroy+0x4e1/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990 Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824 CPU: 4 PID: 824 Comm: mount.cifs Tainted: G W 6.1.0-rc5+ #82 Call Trace: dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 smbd_destroy+0x4fc/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Allocated by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7a/0x90 _smbd_get_connection+0x1b6f/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 __kmem_cache_free+0xc8/0x330 _smbd_get_connection+0x1c6a/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Let's initialize the MR recovery work before MR allocate to prevent the warning, remove the MRs from the list to prevent the UAF.

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix slab-use-after-free in decode_session6 When the xfrm device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when the xfrm device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff8881111458ef by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 xfrmi_xmit+0x173/0x1ca0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:intel_idle_hlt+0x23/0x30 Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4 RSP: 0018:ffffc90000197d78 EFLAGS: 00000246 RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5 RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50 RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter_state+0xd3/0x6f0 cpuidle_enter+0x4e/0xa0 do_idle+0x2fe/0x3c0 cpu_startup_entry+0x18/0x20 start_secondary+0x200/0x290 secondary_startup_64_no_verify+0x167/0x16b </TASK> Allocated by task 939: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 inet6_ifa_notify+0x118/0x230 __ipv6_ifa_notify+0x177/0xbe0 addrconf_dad_completed+0x133/0xe00 addrconf_dad_work+0x764/0x1390 process_one_work+0xa32/0x16f0 worker_thread+0x67d/0x10c0 kthread+0x344/0x440 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888111145800 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 239 bytes inside of freed 640-byte region [ffff888111145800, ffff888111145a80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: clk: imx: scu: use _safe list iterator to avoid a use after free This loop is freeing "clk" so it needs to use list_for_each_entry_safe(). Otherwise it dereferences a freed variable to get the next item on the loop.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Make bpf_refcount_acquire fallible for non-owning refs This patch fixes an incorrect assumption made in the original bpf_refcount series [0], specifically that the BPF program calling bpf_refcount_acquire on some node can always guarantee that the node is alive. In that series, the patch adding failure behavior to rbtree_add and list_push_{front, back} breaks this assumption for non-owning references. Consider the following program: n = bpf_kptr_xchg(&mapval, NULL); /* skip error checking */ bpf_spin_lock(&l); if(bpf_rbtree_add(&t, &n->rb, less)) { bpf_refcount_acquire(n); /* Failed to add, do something else with the node */ } bpf_spin_unlock(&l); It's incorrect to assume that bpf_refcount_acquire will always succeed in this scenario. bpf_refcount_acquire is being called in a critical section here, but the lock being held is associated with rbtree t, which isn't necessarily the lock associated with the tree that the node is already in. So after bpf_rbtree_add fails to add the node and calls bpf_obj_drop in it, the program has no ownership of the node's lifetime. Therefore the node's refcount can be decr'd to 0 at any time after the failing rbtree_add. If this happens before the refcount_acquire above, the node might be free'd, and regardless refcount_acquire will be incrementing a 0 refcount. Later patches in the series exercise this scenario, resulting in the expected complaint from the kernel (without this patch's changes): refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110 Modules linked in: bpf_testmod(O) CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0xbc/0x110 Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7 RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680 RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7 R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388 R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048 FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bpf_refcount_acquire_impl+0xb5/0xc0 (rest of output snipped) The patch addresses this by changing bpf_refcount_acquire_impl to use refcount_inc_not_zero instead of refcount_inc and marking bpf_refcount_acquire KF_RET_NULL. For owning references, though, we know the above scenario is not possible and thus that bpf_refcount_acquire will always succeed. Some verifier bookkeeping is added to track "is input owning ref?" for bpf_refcount_acquire calls and return false from is_kfunc_ret_null for bpf_refcount_acquire on owning refs despite it being marked KF_RET_NULL. Existing selftests using bpf_refcount_acquire are modified where necessary to NULL-check its return value. [0]: https://lore.kernel.org/bpf/20230415201811.343116-1-davemarchevsky@fb.com/

In the Linux kernel, the following vulnerability has been resolved: firewire: net: fix use after free in fwnet_finish_incoming_packet() The netif_rx() function frees the skb so we can't dereference it to save the skb->len.

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access.

In the Linux kernel, the following vulnerability has been resolved: loop: Fix use-after-free issues do_req_filebacked() calls blk_mq_complete_request() synchronously or asynchronously when using asynchronous I/O unless memory allocation fails. Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor 'rq' after do_req_filebacked() finished unless we are sure that the request has not yet been completed. This patch fixes the following kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054 Call trace: css_put.42938+0x1c/0x1ac loop_process_work+0xc8c/0xfd4 loop_rootcg_workfn+0x24/0x34 process_one_work+0x244/0x558 worker_thread+0x400/0x8fc kthread+0x16c/0x1e0 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). Previously, nilfs_evict_inode() could cause use-after-free read for nilfs_root if inodes are left in "garbage_list" and released by nilfs_dispose_list at the end of nilfs_detach_log_writer(), and this bug was fixed by commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()"). However, it turned out that there is another possibility of UAF in the call path where mark_inode_dirty_sync() is called from iput(): nilfs_detach_log_writer() nilfs_dispose_list() iput() mark_inode_dirty_sync() __mark_inode_dirty() nilfs_dirty_inode() __nilfs_mark_inode_dirty() nilfs_load_inode_block() --> causes UAF of nilfs_root struct This can happen after commit 0ae45f63d4ef ("vfs: add support for a lazytime mount option"), which changed iput() to call mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME flag and i_nlink is non-zero. This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty data after degenerating to read-only") when using the syzbot reproducer, but the issue has potentially existed before. Fix this issue by adding a "purging flag" to the nilfs structure, setting that flag while disposing the "garbage_list" and checking it in __nilfs_mark_inode_dirty(). Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()"), this patch does not rely on ns_writer to determine whether to skip operations, so as not to break recovery on mount. The nilfs_salvage_orphan_logs routine dirties the buffer of salvaged data before attaching the log writer, so changing __nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL will cause recovery write to fail. The purpose of using the cleanup-only flag is to allow for narrowing of such conditions.

In the Linux kernel, the following vulnerability has been resolved: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Correct devm device reference for hidinput input_dev name Reference the HID device rather than the input device for the devm allocation of the input_dev name. Referencing the input_dev would lead to a use-after-free when the input_dev was unregistered and subsequently fires a uevent that depends on the name. At the point of firing the uevent, the name would be freed by devres management. Use devm_kasprintf to simplify the logic for allocating memory and formatting the input_dev name string.

In the Linux kernel, the following vulnerability has been resolved: HID: mcp-2221: prevent UAF in delayed work If the device is plugged/unplugged without giving time for mcp_init_work() to complete, we might kick in the devm free code path and thus have unavailable struct mcp_2221 while in delayed work. Canceling the delayed_work item is enough to solve the issue, because cancel_delayed_work_sync will prevent the work item to requeue itself.

In the Linux kernel, the following vulnerability has been resolved: dax: Fix dax_mapping_release() use after free A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region provider (like modprobe -r dax_hmem) yields: kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000) [..] DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260 [..] RIP: 0010:__lock_acquire+0x9fc/0x2260 [..] Call Trace: <TASK> [..] lock_acquire+0xd4/0x2c0 ? ida_free+0x62/0x130 _raw_spin_lock_irqsave+0x47/0x70 ? ida_free+0x62/0x130 ida_free+0x62/0x130 dax_mapping_release+0x1f/0x30 device_release+0x36/0x90 kobject_delayed_cleanup+0x46/0x150 Due to attempting ida_free() on an ida object that has already been freed. Devices typically only hold a reference on their parent while registered. If a child needs a parent object to complete its release it needs to hold a reference that it drops from its release callback. Arrange for a dax_mapping to pin its parent dev_dax instance until dax_mapping_release().

In the Linux kernel, the following vulnerability has been resolved: ip_vti: fix potential slab-use-after-free in decode_session6 When ip_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ip_vti device sends IPv6 packets. As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid potential vm use-after-free Adding the vm to the vm_xa table makes it visible to userspace, which could try to race with us to close the vm. So we need to take our extra reference before putting it in the table. (cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)

In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove another errant put in error path drm_gem_shmem_mmap() doesn't own reference in error code path, resulting in the dma-buf shmem GEM object getting prematurely freed leading to a later use-after-free.

In the Linux kernel, the following vulnerability has been resolved: media: netup_unidvb: fix use-after-free at del_timer() When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: call disconnect callback before deleting conn In hci_cs_disconnect, we do hci_conn_del even if disconnection failed. ISO, L2CAP and SCO connections refer to the hci_conn without hci_conn_get, so disconn_cfm must be called so they can clean up their conn, otherwise use-after-free occurs. ISO: ========================================================== iso_sock_connect:880: sk 00000000eabd6557 iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073 hci_dev_put:1487: hci0 orig refcnt 17 __iso_chan_add:214: conn 00000000b6251073 iso_sock_clear_timer:117: sock 00000000eabd6557 state 3 ... hci_rx_work:4085: hci0 Event packet hci_event_packet:7601: hci0: event 0x0f hci_cmd_status_evt:4346: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3107: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560 hci_conn_unlink:1102: hci0: hcon 000000001696f1fd hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2 hci_chan_list_flush:2780: hcon 000000001696f1fd hci_dev_put:1487: hci0 orig refcnt 21 hci_dev_put:1487: hci0 orig refcnt 20 hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c ... <no iso_* activity on sk/conn> ... iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557 BUG: kernel NULL pointer dereference, address: 0000000000000668 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth ========================================================== L2CAP: ================================================================== hci_cmd_status_evt:4359: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3085: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585 hci_conn_unlink:1102: hci0: hcon ffff88800c999000 hci_chan_list_flush:2780: hcon ffff88800c999000 hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280 ... BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth] Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175 CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0xf8/0x180 ? hci_send_acl+0x2d/0x540 [bluetooth] kasan_report+0xa8/0xe0 ? hci_send_acl+0x2d/0x540 [bluetooth] hci_send_acl+0x2d/0x540 [bluetooth] ? __pfx___lock_acquire+0x10/0x10 l2cap_chan_send+0x1fd/0x1300 [bluetooth] ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth] ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth] ? lock_release+0x1d5/0x3c0 ? mark_held_locks+0x1a/0x90 l2cap_sock_sendmsg+0x100/0x170 [bluetooth] sock_write_iter+0x275/0x280 ? __pfx_sock_write_iter+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_iter_readv_writev+0x176/0x220 ? __pfx_do_iter_readv_writev+0x10/0x10 ? find_held_lock+0x83/0xa0 ? selinux_file_permission+0x13e/0x210 do_iter_write+0xda/0x340 vfs_writev+0x1b4/0x400 ? __pfx_vfs_writev+0x10/0x10 ? __seccomp_filter+0x112/0x750 ? populate_seccomp_data+0x182/0x220 ? __fget_light+0xdf/0x100 ? do_writev+0x19d/0x210 do_writev+0x19d/0x210 ? __pfx_do_writev+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0x60/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 ? do_syscall_64+0x6c/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7ff45cb23e64 Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_inode's cache, dic may be released, it needs break the loop rather than continuing it, in order to avoid accessing invalid dic pointer.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix use-after-free in pci_bus_release_domain_nr() Commit c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()") introduced a use-after-free bug in the bus removal cleanup. The issue was found with kfence: [ 19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70 [ 19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-#115): [ 19.309677] pci_bus_release_domain_nr+0x10/0x70 [ 19.309691] dw_pcie_host_deinit+0x28/0x78 [ 19.309702] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194] [ 19.309734] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194] [ 19.309752] platform_probe+0x90/0xd8 ... [ 19.311457] kfence-#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k [ 19.311469] allocated by task 96 on cpu 10 at 19.279323s: [ 19.311562] __kmem_cache_alloc_node+0x260/0x278 [ 19.311571] kmalloc_trace+0x24/0x30 [ 19.311580] pci_alloc_bus+0x24/0xa0 [ 19.311590] pci_register_host_bridge+0x48/0x4b8 [ 19.311601] pci_scan_root_bus_bridge+0xc0/0xe8 [ 19.311613] pci_host_probe+0x18/0xc0 [ 19.311623] dw_pcie_host_init+0x2c0/0x568 [ 19.311630] tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194] [ 19.311647] platform_probe+0x90/0xd8 ... [ 19.311782] freed by task 96 on cpu 10 at 19.285833s: [ 19.311799] release_pcibus_dev+0x30/0x40 [ 19.311808] device_release+0x30/0x90 [ 19.311814] kobject_put+0xa8/0x120 [ 19.311832] device_unregister+0x20/0x30 [ 19.311839] pci_remove_bus+0x78/0x88 [ 19.311850] pci_remove_root_bus+0x5c/0x98 [ 19.311860] dw_pcie_host_deinit+0x28/0x78 [ 19.311866] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194] [ 19.311883] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194] [ 19.311900] platform_probe+0x90/0xd8 ... [ 19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4 [ 19.320171] Hardware name: /, BIOS 1.0-d7fb19b 08/10/2022 [ 19.325852] Workqueue: events_unbound deferred_probe_work_func The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't directly call pci_bus_release_domain_nr(). The issue turns out to be in pci_remove_root_bus() which first calls pci_remove_bus() which frees the struct pci_bus when its struct device is released. Then pci_bus_release_domain_nr() is called and accesses the freed struct pci_bus. Reordering these fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug. Set the tcp_sw_host->session after we have completed session creation and can no longer fail.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free for cached IPU bio xfstest generic/019 reports a bug: kernel BUG at mm/filemap.c:1619! RIP: 0010:folio_end_writeback+0x8a/0x90 Call Trace: end_page_writeback+0x1c/0x60 f2fs_write_end_io+0x199/0x420 bio_endio+0x104/0x180 submit_bio_noacct+0xa5/0x510 submit_bio+0x48/0x80 f2fs_submit_write_bio+0x35/0x300 f2fs_submit_merged_ipu_write+0x2a0/0x2b0 f2fs_write_single_data_page+0x838/0x8b0 f2fs_write_cache_pages+0x379/0xa30 f2fs_write_data_pages+0x30c/0x340 do_writepages+0xd8/0x1b0 __writeback_single_inode+0x44/0x370 writeback_sb_inodes+0x233/0x4d0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x1dd/0x2d0 wb_workfn+0x367/0x4a0 process_one_work+0x21d/0x430 worker_thread+0x4e/0x3c0 kthread+0x103/0x130 ret_from_fork+0x2c/0x50 The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write() in f2fs_write_single_data_page() tries to flush IPU bio in cache, however f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter, result in submitting random cached bio which belong to other IO context, then it will cause use-after-free issue, fix it by adding additional validity check.

In the Linux kernel, the following vulnerability has been resolved: lib: cpu_rmap: Avoid use after free on rmap->obj array entries When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no cases where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the notify arg) is called, followed by a call to free_irq_cpu_rmap() so we don't hit and issue. Subsequent patches in this series excersize this flow, hence the required fix.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed.

In the Linux kernel, the following vulnerability has been resolved: net: fix UaF in netns ops registration error path If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix use-after-free bug in refresh_cache_worker() The UAF bug occurred because we were putting DFS root sessions in cifs_umount() while DFS cache refresher was being executed. Make DFS root sessions have same lifetime as DFS tcons so we can avoid the use-after-free bug is DFS cache refresher and other places that require IPCs to get new DFS referrals on. Also, get rid of mount group handling in DFS cache as we no longer need it. This fixes below use-after-free bug catched by KASAN [ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56 [ 379.948096] [ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23 [ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 379.949942] Call Trace: [ 379.950113] <TASK> [ 379.950260] dump_stack_lvl+0x50/0x67 [ 379.950510] print_report+0x16a/0x48e [ 379.950759] ? __virt_addr_valid+0xd8/0x160 [ 379.951040] ? __phys_addr+0x41/0x80 [ 379.951285] kasan_report+0xdb/0x110 [ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs] [ 379.953637] ? __pfx___mutex_lock+0x10/0x10 [ 379.953915] ? lock_release+0xb6/0x720 [ 379.954167] ? __pfx_lock_acquire+0x10/0x10 [ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs] [ 379.954960] ? __pfx_wb_workfn+0x10/0x10 [ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs] [ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs] [ 379.956323] ? __pfx_lock_acquired+0x10/0x10 [ 379.956615] ? read_word_at_a_time+0xe/0x20 [ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220 [ 379.957235] process_one_work+0x535/0x990 [ 379.957509] ? __pfx_process_one_work+0x10/0x10 [ 379.957812] ? lock_acquired+0xb7/0x5f0 [ 379.958069] ? __list_add_valid+0x37/0xd0 [ 379.958341] ? __list_add_valid+0x37/0xd0 [ 379.958611] worker_thread+0x8e/0x630 [ 379.958861] ? __pfx_worker_thread+0x10/0x10 [ 379.959148] kthread+0x17d/0x1b0 [ 379.959369] ? __pfx_kthread+0x10/0x10 [ 379.959630] ret_from_fork+0x2c/0x50 [ 379.959879] </TASK>

In the Linux kernel, the following vulnerability has been resolved: cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() KASAN and KFENCE detected an user-after-free in the CXL driver. This happens in the cxl_decoder_add() fail path. KASAN prints the following error: BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299) This happens in cxl_parse_cfmws(), where put_device() is called, releasing cxld, which is accessed later. Use the local variables in the dev_err() instead of pointing to the released memory. Since the dev_err() is printing a resource, change the open coded print format to use the %pr format specifier.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix invalid address access in lookup_rec() when index is 0 KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0.

In the Linux kernel, the following vulnerability has been resolved: crypto: xts - Handle EBUSY correctly As it is xts only handles the special return value of EINPROGRESS, which means that in all other cases it will free data related to the request. However, as the caller of xts may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: mlx5: fix possible ptp queue fifo use-after-free Fifo indexes are not checked during pop operations and it leads to potential use-after-free when poping from empty queue. Such case was possible during re-sync action. WARN_ON_ONCE covers future cases. There were out-of-order cqe spotted which lead to drain of the queue and use-after-free because of lack of fifo pointers check. Special check and counter are added to avoid resync operation if SKB could not exist in the fifo because of OOO cqe (skb_id must be between consumer and producer index).

In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments.

A use-after-free vulnerability in the Linux kernel's fs/smb/client component can be exploited to achieve local privilege escalation. In case of an error in smb3_fs_context_parse_param, ctx->password was freed but the field was not set to NULL which could lead to double free. We recommend upgrading past commit e6e43b8aa7cd3c3af686caf0c2e11819a886d705.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fail SCO/ISO via hci_conn_failed if ACL gone early Not calling hci_(dis)connect_cfm before deleting conn referred to by a socket generally results to use-after-free. When cleaning up SCO connections when the parent ACL is deleted too early, use hci_conn_failed to do the connection cleanup properly. We also need to clean up ISO connections in a similar situation when connecting has started but LE Create CIS is not yet sent, so do it too here.

In the Linux kernel, the following vulnerability has been resolved: veth: Fix use after free in XDP_REDIRECT Commit 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb") introduced a bug where it tried to use pskb_expand_head() if the headroom was less than XDP_PACKET_HEADROOM. This however uses kmalloc to expand the head, which will later allow consume_skb() to free the skb while is it still in use by AF_XDP. Previously if the headroom was less than XDP_PACKET_HEADROOM we continued on to allocate a new skb from pages so this restores that behavior. BUG: KASAN: use-after-free in __xsk_rcv+0x18d/0x2c0 Read of size 78 at addr ffff888976250154 by task napi/iconduit-g/148640 CPU: 5 PID: 148640 Comm: napi/iconduit-g Kdump: loaded Tainted: G O 6.1.4-cloudflare-kasan-2023.1.2 #1 Hardware name: Quanta Computer Inc. QuantaPlex T41S-2U/S2S-MB, BIOS S2S_3B10.03 06/21/2018 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? __xsk_rcv+0x18d/0x2c0 kasan_report+0xad/0x130 ? __xsk_rcv+0x18d/0x2c0 kasan_check_range+0x149/0x1a0 memcpy+0x20/0x60 __xsk_rcv+0x18d/0x2c0 __xsk_map_redirect+0x1f3/0x490 ? veth_xdp_rcv_skb+0x89c/0x1ba0 [veth] xdp_do_redirect+0x5ca/0xd60 veth_xdp_rcv_skb+0x935/0x1ba0 [veth] ? __netif_receive_skb_list_core+0x671/0x920 ? veth_xdp+0x670/0x670 [veth] veth_xdp_rcv+0x304/0xa20 [veth] ? do_xdp_generic+0x150/0x150 ? veth_xdp_rcv_one+0xde0/0xde0 [veth] ? _raw_spin_lock_bh+0xe0/0xe0 ? newidle_balance+0x887/0xe30 ? __perf_event_task_sched_in+0xdb/0x800 veth_poll+0x139/0x571 [veth] ? veth_xdp_rcv+0xa20/0xa20 [veth] ? _raw_spin_unlock+0x39/0x70 ? finish_task_switch.isra.0+0x17e/0x7d0 ? __switch_to+0x5cf/0x1070 ? __schedule+0x95b/0x2640 ? io_schedule_timeout+0x160/0x160 __napi_poll+0xa1/0x440 napi_threaded_poll+0x3d1/0x460 ? __napi_poll+0x440/0x440 ? __kthread_parkme+0xc6/0x1f0 ? __napi_poll+0x440/0x440 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 148640: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 skb_release_data+0x449/0x600 consume_skb+0x9f/0x1c0 veth_xdp_rcv_skb+0x89c/0x1ba0 [veth] veth_xdp_rcv+0x304/0xa20 [veth] veth_poll+0x139/0x571 [veth] __napi_poll+0xa1/0x440 napi_threaded_poll+0x3d1/0x460 kthread+0x2a2/0x340 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888976250000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 340 bytes inside of 2048-byte region [ffff888976250000, ffff888976250800) The buggy address belongs to the physical page: page:00000000ae18262a refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x976250 head:00000000ae18262a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004cf00 raw: 0000000000000000 0000000080080008 00000002ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888976250000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888976250080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888976250100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888976250180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888976250200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] u ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hsr: Prevent use after free in prp_create_tagged_frame() The prp_fill_rct() function can fail. In that situation, it frees the skb and returns NULL. Meanwhile on the success path, it returns the original skb. So it's straight forward to fix bug by using the returned value.

A use after free vulnerability was found in prepare_to_relocate in fs/btrfs/relocation.c in btrfs in the Linux Kernel. This possible flaw can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag().

In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381

In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is returned.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup.

A use-after-free vulnerability in the Linux kernel's net/sched: sch_qfq component can be exploited to achieve local privilege escalation. When the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue(). We recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock*

Linux Kernel nftables Use-After-Free Local Privilege Escalation Vulnerability; `nft_chain_lookup_byid()` failed to check whether a chain was active and CAP_NET_ADMIN is in any user or network namespace

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop().