In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in ext4_writepages we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first..

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Remove WARN_ON for device endpoint command timeouts This commit addresses a rarely observed endpoint command timeout which causes kernel panic due to warn when 'panic_on_warn' is enabled and unnecessary call trace prints when 'panic_on_warn' is disabled. It is seen during fast software-controlled connect/disconnect testcases. The following is one such endpoint command timeout that we observed: 1. Connect ======= ->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd 2. Disconnect ========== ->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmd In the issue scenario, in Exynos platforms, we observed that control transfers for the previous connect have not yet been completed and end transfer command sent as a part of the disconnect sequence and processing of USB_ENDPOINT_HALT feature request from the host timeout. This maybe an expected scenario since the controller is processing EP commands sent as a part of the previous connect. It maybe better to remove WARN_ON in all places where device endpoint commands are sent to avoid unnecessary kernel panic due to warn.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix complex rules rehash error flow Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. Similar to the simple rules, complex rules rehash logic suffers from the same problems. This patch fixes the error flow for moving complex rules: - If new rule creation fails before it was even enqeued, do not poll for completion - If TIMEOUT happened while moving the rule, no point trying to poll for completions for other rules. Something is broken, completion won't come, just abort the rehash sequence. - If some other completion with error received, don't give up. Continue handling rest of the rules to minimize the damage. - Make sure that the first error code that was received will be actually returned to the caller instead of replacing it with the generic error code. All the aforementioned issues stem from the same bad error flow, so no point fixing them one by one and leaving partially broken code - fixing them in one patch.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix assertion when building free space tree When building the free space tree with the block group tree feature enabled, we can hit an assertion failure like this: BTRFS info (device loop0 state M): rebuilding free space tree assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1102! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 sp : ffff8000a4ce7600 x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8 x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001 x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160 x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0 x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00 x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0 x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e Call trace: populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P) btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337 btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: f0047182 91178042 528089c3 9771d47b (d4210000) ---[ end trace 0000000000000000 ]--- This happens because we are processing an empty block group, which has no extents allocated from it, there are no items for this block group, including the block group item since block group items are stored in a dedicated tree when using the block group tree feature. It also means this is the block group with the highest start offset, so there are no higher keys in the extent root, hence btrfs_search_slot_for_read() returns 1 (no higher key found). Fix this by asserting 'ret' is 0 only if the block group tree feature is not enabled, in which case we should find a block group item for the block group since it's stored in the extent root and block group item keys are greater than extent item keys (the value for BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively). In case 'ret' is 1, we just need to add a record to the free space tree which spans the whole block group, and we can achieve this by making 'ret == 0' as the while loop's condition.

In the Linux kernel, the following vulnerability has been resolved: net_sched: skbprio: Remove overly strict queue assertions In the current implementation, skbprio enqueue/dequeue contains an assertion that fails under certain conditions when SKBPRIO is used as a child qdisc under TBF with specific parameters. The failure occurs because TBF sometimes peeks at packets in the child qdisc without actually dequeuing them when tokens are unavailable. This peek operation creates a discrepancy between the parent and child qdisc queue length counters. When TBF later receives a high-priority packet, SKBPRIO's queue length may show a different value than what's reflected in its internal priority queue tracking, triggering the assertion. The fix removes this overly strict assertions in SKBPRIO, they are not necessary at all.

In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data() when an inode had the INLINE_DATA_FL flag set but was missing the system.data extended attribute. Since this can happen due to a maiciouly fuzzed file system, we shouldn't BUG, but rather, report it as a corrupted file system. Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii ext4_create_inline_data() and ext4_inline_data_truncate().

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix WARN_ON for monitor mode on some devices On devices without WANT_MONITOR_VIF (and probably without channel context support) we get a WARN_ON for changing the per-link setting of a monitor interface. Since we already skip AP_VLAN interfaces and MONITOR with WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update the settings, catch this in the link change code instead of the warning.

In the Linux kernel, the following vulnerability has been resolved: dm cache: prevent BUG_ON by blocking retries on failed device resumes A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt.

In the Linux kernel, the following vulnerability has been resolved: wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release plfxlc_mac_release() asserts that mac->lock is held. This assertion is incorrect, because even if it was possible, it would not be the valid behaviour. The function is used when probe fails or after the device is disconnected. In both cases mac->lock can not be held as the driver is not working with the device at the moment. All functions that use mac->lock unlock it just after it was held. There is also no need to hold mac->lock for plfxlc_mac_release() itself, as mac data is not affected, except for mac->flags, which is modified atomically. This bug leads to the following warning: ================================================================ WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0 Modules linked in: CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: usb_hub_wq hub_event RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106 Call Trace: <TASK> probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694 usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165 usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238 usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620 hub_port_connect drivers/usb/core/hub.c:5477 [inline] hub_port_connect_change drivers/usb/core/hub.c:5617 [inline] port_event drivers/usb/core/hub.c:5773 [inline] hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855 process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292 worker_thread+0xa47/0x1200 kernel/workqueue.c:2439 kthread+0x28d/0x320 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================ Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: clean up FDB, MDB, VLAN entries on unbind As explained in many places such as commit b117e1e8a86d ("net: dsa: delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given the assumption that higher layers have balanced additions/deletions. As such, it only makes sense to be extremely vocal when those assumptions are violated and the driver unbinds with entries still present. But Ido Schimmel points out a very simple situation where that is wrong: https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/ (also briefly discussed by me in the aforementioned commit). Basically, while the bridge bypass operations are not something that DSA explicitly documents, and for the majority of DSA drivers this API simply causes them to go to promiscuous mode, that isn't the case for all drivers. Some have the necessary requirements for bridge bypass operations to do something useful - see dsa_switch_supports_uc_filtering(). Although in tools/testing/selftests/net/forwarding/local_termination.sh, we made an effort to popularize better mechanisms to manage address filters on DSA interfaces from user space - namely macvlan for unicast, and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the fact is that 'bridge fdb add ... self static local' also exists as kernel UAPI, and might be useful to someone, even if only for a quick hack. It seems counter-productive to block that path by implementing shim .ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from running, although we could do that. Accepting that cleanup is necessary seems to be the only option. Especially since we appear to be coming back at this from a different angle as well. Russell King is noticing that the WARN_ON() triggers even for VLANs: https://lore.kernel.org/netdev/Z_li8Bj8bD4-BYKQ@shell.armlinux.org.uk/ What happens in the bug report above is that dsa_port_do_vlan_del() fails, then the VLAN entry lingers on, and then we warn on unbind and leak it. This is not a straight revert of the blamed commit, but we now add an informational print to the kernel log (to still have a way to see that bugs exist), and some extra comments gathered from past years' experience, to justify the logic.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init Move the get_ctx(child_ctx) call and the child_event->ctx assignment to occur immediately after the child event is allocated. Ensure that child_event->ctx is non-NULL before any subsequent error path within inherit_event calls free_event(), satisfying the assumptions of the cleanup code. Details: There's no clear Fixes tag, because this bug is a side-effect of multiple interacting commits over time (up to 15 years old), not a single regression. The code initially incremented refcount then assigned context immediately after the child_event was created. Later, an early validity check for child_event was added before the refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was added, assuming event->ctx is valid if the pmu_ctx is valid. The problem is that the WARN_ON_ONCE() could trigger after the initial check passed but before child_event->ctx was assigned, violating its precondition. The solution is to assign child_event->ctx right after its initial validation. This ensures the context exists for any subsequent checks or cleanup routines, resolving the WARN_ON_ONCE(). To resolve it, defer the refcount update and child_event->ctx assignment directly after child_event->pmu_ctx is set but before checking if the parent event is orphaned. The cleanup routine depends on event->pmu_ctx being non-NULL before it verifies event->ctx is non-NULL. This also maintains the author's original intent of passing in child_ctx to find_get_pmu_context before its refcount/assignment. [ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in __es_tree_search Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/extents_status.c:199! [...] RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline] RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217 [...] Call Trace: ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766 ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561 ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964 ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384 ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567 ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980 ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031 ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257 v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63 v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82 vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368 dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490 ext4_quota_enable fs/ext4/super.c:6137 [inline] ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163 ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754 mount_bdev+0x2e9/0x3b0 fs/super.c:1158 mount_fs+0x4b/0x1e4 fs/super.c:1261 [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_enable_quotas ext4_quota_enable ext4_iget __ext4_iget ext4_ext_check_inode ext4_ext_check __ext4_ext_check ext4_valid_extent_entries Check for overlapping extents does't take effect dquot_enable vfs_load_quota_inode v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent ext4_es_cache_extent __es_tree_search ext4_es_end BUG_ON(es->es_lblk + es->es_len < es->es_lblk) The error ext4 extents is as follows: 0af3 0300 0400 0000 00000000 extent_header 00000000 0100 0000 12000000 extent1 00000000 0100 0000 18000000 extent2 02000000 0400 0000 14000000 extent3 In the ext4_valid_extent_entries function, if prev is 0, no error is returned even if lblock<=prev. This was intended to skip the check on the first extent, but in the error image above, prev=0+1-1=0 when checking the second extent, so even though lblock<=prev, the function does not return an error. As a result, bug_ON occurs in __es_tree_search and the system panics. To solve this problem, we only need to check that: 1. The lblock of the first extent is not less than 0. 2. The lblock of the next extent is not less than the next block of the previous extent. The same applies to extent_idx.

In the Linux kernel, the following vulnerability has been resolved: blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default() wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from wbt_alloc() and wbt_init(). However, both are expected failure paths: - wbt_alloc() can return NULL under memory pressure (-ENOMEM) - wbt_init() can fail with -EBUSY if wbt is already registered syzbot triggers this by injecting memory allocation failures during MTD partition creation via ioctl(BLKPG), causing a spurious warning. wbt_init_enable_default() is a best-effort initialization called from blk_register_queue() with a void return type. Failure simply means the disk operates without writeback throttling, which is harmless. Replace WARN_ON_ONCE with plain if-checks, consistent with how wbt_set_lat() in the same file already handles these failures. Add a pr_warn() for the wbt_init() failure to retain diagnostic information without triggering a full stack trace.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11)

In the Linux kernel, the following vulnerability has been resolved: net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via pn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ... pn_socket_autobind() calls pn_socket_bind() with port 0 and, on -EINVAL, assumes the socket was already bound and asserts that the port is non-zero: err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn)); if (err != -EINVAL) return err; BUG_ON(!pn_port(pn_sk(sock->sk)->sobject)); return 0; /* socket was already bound */ However pn_socket_bind() also returns -EINVAL when sk->sk_state is not TCP_CLOSE, even when the socket has never been bound and pn_port() is still 0. In that case the BUG_ON() fires and panics the kernel from a user-triggerable path. Treat the "bind returned -EINVAL but pn_port() is still 0" case as a regular error and propagate -EINVAL to the caller instead of crashing. Existing callers already translate a non-zero return from pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here only changes behaviour from panic to a normal errno.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: Fix BUG_ON in probe function The snd_dma_buffer.bytes field now contains the aligned size, which this snd_BUG_ON() did not account for, resulting in the following: [ 9.625915] ------------[ cut here ]------------ [ 9.633440] WARNING: CPU: 0 PID: 126 at sound/pci/ymfpci/ymfpci_main.c:2168 snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.648926] Modules linked in: snd_ymfpci(+) snd_intel_dspcfg kvm(+) snd_intel_sdw_acpi snd_ac97_codec snd_mpu401_uart snd_opl3_lib irqbypass snd_hda_codec gameport snd_rawmidi crct10dif_pclmul crc32_pclmul cfg80211 snd_hda_core polyval_clmulni polyval_generic gf128mul snd_seq_device ghash_clmulni_intel snd_hwdep ac97_bus sha512_ssse3 rfkill snd_pcm aesni_intel tg3 snd_timer crypto_simd snd mxm_wmi libphy cryptd k10temp fam15h_power pcspkr soundcore sp5100_tco wmi acpi_cpufreq mac_hid dm_multipath sg loop fuse dm_mod bpf_preload ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi firewire_ohci crc32c_intel firewire_core xhci_pci crc_itu_t pata_via xhci_pci_renesas floppy [ 9.711849] CPU: 0 PID: 126 Comm: kworker/0:2 Not tainted 6.1.21-1-lts #1 08d2e5ece03136efa7c6aeea9a9c40916b1bd8da [ 9.722200] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 9.732204] Workqueue: events work_for_cpu_fn [ 9.736580] RIP: 0010:snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.742594] Code: 8c c0 4c 89 e2 48 89 df 48 c7 c6 92 c6 8c c0 e8 15 d0 e9 ff 48 83 c4 08 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f e9 d3 7a 33 e3 <0f> 0b e9 cb fd ff ff 41 bd fb ff ff ff eb db 41 bd f4 ff ff ff eb [ 9.761358] RSP: 0018:ffffab64804e7da0 EFLAGS: 00010287 [ 9.766594] RAX: ffff8fa2df06c400 RBX: ffff8fa3073a8000 RCX: ffff8fa303fbc4a8 [ 9.773734] RDX: ffff8fa2df06d000 RSI: 0000000000000010 RDI: 0000000000000020 [ 9.780876] RBP: ffff8fa300b5d0d0 R08: ffff8fa3073a8e50 R09: 00000000df06bf00 [ 9.788018] R10: ffff8fa2df06bf00 R11: 00000000df068200 R12: ffff8fa3073a8918 [ 9.795159] R13: 0000000000000000 R14: 0000000000000080 R15: ffff8fa2df068200 [ 9.802317] FS: 0000000000000000(0000) GS:ffff8fa9fec00000(0000) knlGS:0000000000000000 [ 9.810414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.816158] CR2: 000055febaf66500 CR3: 0000000101a2e000 CR4: 00000000000406f0 [ 9.823301] Call Trace: [ 9.825747] <TASK> [ 9.827889] snd_card_ymfpci_probe+0x194/0x950 [snd_ymfpci b78a5fe64b5663a6390a909c67808567e3e73615] [ 9.837030] ? finish_task_switch.isra.0+0x90/0x2d0 [ 9.841918] local_pci_probe+0x45/0x80 [ 9.845680] work_for_cpu_fn+0x1a/0x30 [ 9.849431] process_one_work+0x1c7/0x380 [ 9.853464] worker_thread+0x1af/0x390 [ 9.857225] ? rescuer_thread+0x3b0/0x3b0 [ 9.861254] kthread+0xde/0x110 [ 9.864414] ? kthread_complete_and_exit+0x20/0x20 [ 9.869210] ret_from_fork+0x22/0x30 [ 9.872792] </TASK> [ 9.874985] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix RTNL assertion warning when remove module For the copper NIC with external PHY, the driver called phylink_connect_phy() during probe and phylink_disconnect_phy() during remove. It caused an RTNL assertion warning in phylink_disconnect_phy() upon module remove. To fix this, add rtnl_lock() and rtnl_unlock() around the phylink_disconnect_phy() in remove function. ------------[ cut here ]------------ RTNL: assertion failed at drivers/net/phy/phylink.c (2351) WARNING: drivers/net/phy/phylink.c:2351 at phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464 Modules linked in: ... CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+ Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7 48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000 RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020 RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000 R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348 FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> txgbe_remove_phy+0xbb/0xd0 [txgbe] txgbe_remove+0x4c/0xb0 [txgbe] pci_device_remove+0x41/0xb0 device_remove+0x43/0x80 device_release_driver_internal+0x206/0x270 driver_detach+0x4a/0xa0 bus_remove_driver+0x83/0x120 driver_unregister+0x2f/0x60 pci_unregister_driver+0x40/0x90 txgbe_driver_exit+0x10/0x850 [txgbe] __do_sys_delete_module.isra.0+0x1c3/0x2f0 __x64_sys_delete_module+0x12/0x20 x64_sys_call+0x20c3/0x2390 do_syscall_64+0x11c/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x15a/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_fault+0x312/0x580 ? srso_alias_return_thunk+0x5/0xfbef5 ? __handle_mm_fault+0x9d5/0x1040 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events+0x101/0x1d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1e8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x2f8/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? irqentry_exit+0xb2/0x600 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions that verify fence writeback addresses are dword-aligned. These assertions can be reached from unprivileged userspace via crafted DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a scheduler worker thread. Replace both BUG_ON() calls with WARN_ON() to log the condition without crashing the kernel. A misaligned fence address at this point indicates a driver bug, but crashing the kernel is never the correct response when the assertion is reachable from userspace. The CS IOCTL path is the correct place to filter invalid submissions; the ring emission callback is too late to do anything about it. (cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e)

In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE when accessing forward path array Although unlikely, recent support for IPIP tunnels increases chances of reaching this WARN_ON_ONCE if userspace manages to build a sufficiently long forward path. Remove it.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix bug due to prealloc collision When userspace is using AF_RXRPC to provide a server, it has to preallocate incoming calls and assign to them call IDs that will be used to thread related recvmsg() and sendmsg() together. The preallocated call IDs will automatically be attached to calls as they come in until the pool is empty. To the kernel, the call IDs are just arbitrary numbers, but userspace can use the call ID to hold a pointer to prepared structs. In any case, the user isn't permitted to create two calls with the same call ID (call IDs become available again when the call ends) and EBADSLT should result from sendmsg() if an attempt is made to preallocate a call with an in-use call ID. However, the cleanup in the error handling will trigger both assertions in rxrpc_cleanup_call() because the call isn't marked complete and isn't marked as having been released. Fix this by setting the call state in rxrpc_service_prealloc_one() and then marking it as being released before calling the cleanup function.

In the Linux kernel, the following vulnerability has been resolved: hfs: Replace BUG_ON with error handling for CNID count checks In a06ec283e125 next_id, folder_count, and file_count in the super block info were expanded to 64 bits, and BUG_ONs were added to detect overflow. This triggered an error reported by syzbot: if the MDB is corrupted, the BUG_ON is triggered. This patch replaces this mechanism with proper error handling and resolves the syzbot reported bug. Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARN() in get_bpf_raw_tp_regs syzkaller reported an issue: WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 Modules linked in: CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005 RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004 R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900 FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline] bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline] bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline] mmap_read_trylock include/linux/mmap_lock.h:204 [inline] stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline] bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline] bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 Tracepoint like trace_mmap_lock_acquire_returned may cause nested call as the corner case show above, which will be resolved with more general method in the future. As a result, WARN_ON_ONCE will be triggered. As Alexei suggested, remove the WARN_ON_ONCE first.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix assertion failure when splitting ordered extent after transaction abort If while we are doing a direct IO write a transaction abort happens, we mark all existing ordered extents with the BTRFS_ORDERED_IOERR flag (done at btrfs_destroy_ordered_extents()), and then after that if we enter btrfs_split_ordered_extent() and the ordered extent has bytes left (meaning we have a bio that doesn't cover the whole ordered extent, see details at btrfs_extract_ordered_extent()), we will fail on the following assertion at btrfs_split_ordered_extent(): ASSERT(!(flags & ~BTRFS_ORDERED_TYPE_FLAGS)); because the BTRFS_ORDERED_IOERR flag is set and the definition of BTRFS_ORDERED_TYPE_FLAGS is just the union of all flags that identify the type of write (regular, nocow, prealloc, compressed, direct IO, encoded). Fix this by returning an error from btrfs_extract_ordered_extent() if we find the BTRFS_ORDERED_IOERR flag in the ordered extent. The error will be the error that resulted in the transaction abort or -EIO if no transaction abort happened. This was recently reported by syzbot with the following trace: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 fail_dump lib/fault-inject.c:53 [inline] should_fail_ex+0x3b0/0x4e0 lib/fault-inject.c:154 should_failslab+0xac/0x100 mm/failslab.c:46 slab_pre_alloc_hook mm/slub.c:4072 [inline] slab_alloc_node mm/slub.c:4148 [inline] __do_kmalloc_node mm/slub.c:4297 [inline] __kmalloc_noprof+0xdd/0x4c0 mm/slub.c:4310 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] btrfs_chunk_alloc_add_chunk_item+0x244/0x1100 fs/btrfs/volumes.c:5742 reserve_chunk_space+0x1ca/0x2c0 fs/btrfs/block-group.c:4292 check_system_chunk fs/btrfs/block-group.c:4319 [inline] do_chunk_alloc fs/btrfs/block-group.c:3891 [inline] btrfs_chunk_alloc+0x77b/0xf80 fs/btrfs/block-group.c:4187 find_free_extent_update_loop fs/btrfs/extent-tree.c:4166 [inline] find_free_extent+0x42d1/0x5810 fs/btrfs/extent-tree.c:4579 btrfs_reserve_extent+0x422/0x810 fs/btrfs/extent-tree.c:4672 btrfs_new_extent_direct fs/btrfs/direct-io.c:186 [inline] btrfs_get_blocks_direct_write+0x706/0xfa0 fs/btrfs/direct-io.c:321 btrfs_dio_iomap_begin+0xbb7/0x1180 fs/btrfs/direct-io.c:525 iomap_iter+0x697/0xf60 fs/iomap/iter.c:90 __iomap_dio_rw+0xeb9/0x25b0 fs/iomap/direct-io.c:702 btrfs_dio_write fs/btrfs/direct-io.c:775 [inline] btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880 btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_pwritev fs/read_write.c:1146 [inline] __do_sys_pwritev2 fs/read_write.c:1204 [inline] __se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1281f85d29 RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148 RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29 RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003 R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328 </TASK> BTRFS error (device loop0 state A): Transaction aborted (error -12) BTRFS: error (device loop0 state A ---truncated---

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent infinite recursion If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to using a bounce buffer. However the bounce buffer here is allocated on the stack, and the only alignment requirement here is that it's naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce buffer is also misaligned we then recurse back into the function again, however the new bounce buffer might also not be aligned, and might never be until we eventually blow through the stack, as we keep recursing. Instead of using the stack use kmalloc, which should respect the power-of-two alignment request here. Fixes a kernel panic when triggering this path through eudebug. v2 (Stuart): - Add build bug check for power-of-two restriction - s/EINVAL/ENOMEM/ (cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff)

In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle errors that nilfs_prepare_chunk() may return Patch series "nilfs2: fix issues with rename operations". This series fixes BUG_ON check failures reported by syzbot around rename operations, and a minor behavioral issue where the mtime of a child directory changes when it is renamed instead of moved. This patch (of 2): The directory manipulation routines nilfs_set_link() and nilfs_delete_entry() rewrite the directory entry in the folio/page previously read by nilfs_find_entry(), so error handling is omitted on the assumption that nilfs_prepare_chunk(), which prepares the buffer for rewriting, will always succeed for these. And if an error is returned, it triggers the legacy BUG_ON() checks in each routine. This assumption is wrong, as proven by syzbot: the buffer layer called by nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may fail due to metadata corruption or other reasons. This has been there all along, but improved sanity checks and error handling may have made it more reproducible in fuzzing tests. Fix this issue by adding missing error paths in nilfs_set_link(), nilfs_delete_entry(), and their caller nilfs_rename().

In the Linux kernel, the following vulnerability has been resolved: libceph: replace overzealous BUG_ON in osdmap_apply_incremental() If the osdmap is (maliciously) corrupted such that the incremental osdmap epoch is different from what is expected, there is no need to BUG. Instead, just declare the incremental osdmap to be invalid.

In the Linux kernel, the following vulnerability has been resolved: ovl: support encoding fid from inode with no alias Dmitry Safonov reported that a WARN_ON() assertion can be trigered by userspace when calling inotify_show_fdinfo() for an overlayfs watched inode, whose dentry aliases were discarded with drop_caches. The WARN_ON() assertion in inotify_show_fdinfo() was removed, because it is possible for encoding file handle to fail for other reason, but the impact of failing to encode an overlayfs file handle goes beyond this assertion. As shown in the LTP test case mentioned in the link below, failure to encode an overlayfs file handle from a non-aliased inode also leads to failure to report an fid with FAN_DELETE_SELF fanotify events. As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails if it cannot find an alias for the inode, but this failure can be fixed. ovl_encode_fh() seldom uses the alias and in the case of non-decodable file handles, as is often the case with fanotify fid info, ovl_encode_fh() never needs to use the alias to encode a file handle. Defer finding an alias until it is actually needed so ovl_encode_fh() will not fail in the common case of FAN_DELETE_SELF fanotify events.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file() When the volume header contains erroneous values that do not reflect the actual state of the filesystem, hfsplus_fill_super() assumes that the attributes file is not yet created, which later results in hitting BUG_ON() when hfsplus_create_attributes_file() is called. Replace this BUG_ON() with -EIO error with a message to suggest running fsck tool.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the current task can be preempted. Another task running on the same CPU may then execute rt6_make_pcpu_route() and successfully install a pcpu_rt entry. When the first task resumes execution, its cmpxchg() in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding mdelay() after rt6_get_pcpu_route(). Using preempt_disable/enable is not appropriate here because ip6_rt_pcpu_alloc() may sleep. Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT: free our allocation and return the existing pcpu_rt installed by another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT kernels where such races should not occur.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7bbfb55a966d [CAUSE] ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a user-controlled group block before ocfs2_verify_group_and_input() validates that block number. That helper is only valid for newly allocated metadata and asserts that the block is not already present in the chosen metadata cache. The code also uses INODE_CACHE(inode) even though the group descriptor belongs to main_bm_inode and later journal accesses use that cache context instead. [FIX] Validate the on-disk group descriptor before caching it, then add it to the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the validation failure path separate from the later cleanup path so we only remove the buffer from that cache after it has actually been inserted. This keeps the group buffer lifetime consistent across validation, journaling, and cleanup.

In the Linux kernel, the following vulnerability has been resolved: fs: relax assertions on failure to encode file handles Encoding file handles is usually performed by a filesystem >encode_fh() method that may fail for various reasons. The legacy users of exportfs_encode_fh(), namely, nfsd and name_to_handle_at(2) syscall are ready to cope with the possibility of failure to encode a file handle. There are a few other users of exportfs_encode_{fh,fid}() that currently have a WARN_ON() assertion when ->encode_fh() fails. Relax those assertions because they are wrong. The second linked bug report states commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") in v6.6 as the regressing commit, but this is not accurate. The aforementioned commit only increases the chances of the assertion and allows triggering the assertion with the reproducer using overlayfs, inotify and drop_caches. Triggering this assertion was always possible with other filesystems and other reasons of ->encode_fh() failures and more particularly, it was also possible with the exact same reproducer using overlayfs that is mounted with options index=on,nfs_export=on also on kernels < v6.6. Therefore, I am not listing the aforementioned commit as a Fixes commit. Backport hint: this patch will have a trivial conflict applying to v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2 RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545 Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000 Call Trace: merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861 btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195 btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130 open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640 btrfs_fill_super fs/btrfs/super.c:987 [inline] btrfs_get_tree_super fs/btrfs/super.c:1951 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline] btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... RIP: 0033:0x7f969c9a8fde Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f ---[ end trace 0000000000000000 ]--- The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic metadata fuzzing tool that corrupts btrfs metadata at runtime. [CAUSE] A non-zero drop_progress.objectid means an interrupted btrfs_drop_snapshot() left a resume point on disk, and in that case drop_level must be greater than 0 because the checkpoint is only saved at internal node levels. Although this invariant is enforced when the kernel writes the root item, it is not validated when the root item is read back from disk. That allows on-disk corruption to provide an invalid state with drop_progress.objectid != 0 and drop_level == 0. When relocation recovery later processes such a root item, merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The same invalid metadata can also trigger the corresponding BUG_ON() in btrfs_drop_snapshot(). [FIX] Fix this by validating the root_item invariant in tree-checker when reading root items from disk: if drop_progress.objectid is non-zero, drop_level must also be non-zero. Reject such malformed metadata with -EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot() and triggers the BUG_ON. After the fix, the same corruption is correctly rejected by tree-checker and the BUG_ON is no longer triggered.

In the Linux kernel, the following vulnerability has been resolved: closures: Change BUG_ON() to WARN_ON() If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON() For reference, this has popped up once in the CI, and we'll need more info to debug it: 03240 ------------[ cut here ]------------ 03240 kernel BUG at lib/closure.c:21! 03240 kernel BUG at lib/closure.c:21! 03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 03240 Modules linked in: 03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570 03240 Hardware name: linux,dummy-virt (DT) 03240 Workqueue: btree_update btree_interior_update_work 03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 03240 pc : closure_put+0x224/0x2a0 03240 lr : closure_put+0x24/0x2a0 03240 sp : ffff0000d12071c0 03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360 03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040 03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168 03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001 03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974 03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d 03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e 03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b 03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954 03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000 03240 Call trace: 03240 closure_put+0x224/0x2a0 03240 bch2_check_for_deadlock+0x910/0x1028 03240 bch2_six_check_for_deadlock+0x1c/0x30 03240 six_lock_slowpath.isra.0+0x29c/0xed0 03240 six_lock_ip_waiter+0xa8/0xf8 03240 __bch2_btree_node_lock_write+0x14c/0x298 03240 bch2_trans_lock_write+0x6d4/0xb10 03240 __bch2_trans_commit+0x135c/0x5520 03240 btree_interior_update_work+0x1248/0x1c10 03240 process_scheduled_works+0x53c/0xd90 03240 worker_thread+0x370/0x8c8 03240 kthread+0x258/0x2e8 03240 ret_from_fork+0x10/0x20 03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000) 03240 ---[ end trace 0000000000000000 ]--- 03240 Kernel panic - not syncing: Oops - BUG: Fatal exception 03240 SMP: stopping secondary CPUs 03241 SMP: failed to stop secondary CPUs 13,15 03241 Kernel Offset: disabled 03241 CPU features: 0x00,00000003,80000008,4240500b 03241 Memory Limit: none 03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- 03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE) Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot: BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags)); Return -EINVAL early if COW mapping is detected. This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example: void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0;

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled.

In the Linux kernel, the following vulnerability has been resolved: media: vimc: Fix wrong function called when vimc_init() fails In vimc_init(), when platform_driver_register(&vimc_pdrv) fails, platform_driver_unregister(&vimc_pdrv) is wrongly called rather than platform_device_unregister(&vimc_pdev), which causes kernel warning: Unexpected driver unregister! WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0 RIP: 0010:driver_unregister+0x8f/0xb0 Call Trace: <TASK> vimc_init+0x7d/0x1000 [vimc] do_one_initcall+0xd0/0x4e0 do_init_module+0x1cf/0x6b0 load_module+0x65c2/0x7820

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix missing hugetlb_lock for resv uncharge There is a recent report on UFFDIO_COPY over hugetlb: https://lore.kernel.org/all/000000000000ee06de0616177560@google.com/ 350: lockdep_assert_held(&hugetlb_lock); Should be an issue in hugetlb but triggered in an userfault context, where it goes into the unlikely path where two threads modifying the resv map together. Mike has a fix in that path for resv uncharge but it looks like the locking criteria was overlooked: hugetlb_cgroup_uncharge_folio_rsvd() will update the cgroup pointer, so it requires to be called with the lock held.

In the Linux kernel, the following vulnerability has been resolved: arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud The page table check trigger BUG_ON() unexpectedly when collapse hugepage: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:82! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 6 PID: 68 Comm: khugepaged Not tainted 6.1.0-rc3+ #750 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : page_table_check_clear.isra.0+0x258/0x3f0 lr : page_table_check_clear.isra.0+0x240/0x3f0 [...] Call trace: page_table_check_clear.isra.0+0x258/0x3f0 __page_table_check_pmd_clear+0xbc/0x108 pmdp_collapse_flush+0xb0/0x160 collapse_huge_page+0xa08/0x1080 hpage_collapse_scan_pmd+0xf30/0x1590 khugepaged_scan_mm_slot.constprop.0+0x52c/0xac8 khugepaged+0x338/0x518 kthread+0x278/0x2f8 ret_from_fork+0x10/0x20 [...] Since pmd_user_accessible_page() doesn't check if a pmd is leaf, it decrease file_map_count for a non-leaf pmd comes from collapse_huge_page(). and so trigger BUG_ON() unexpectedly. Fix this problem by using pmd_leaf() insteal of pmd_present() in pmd_user_accessible_page(). Moreover, use pud_leaf() for pud_user_accessible_page() too.

In the Linux kernel, the following vulnerability has been resolved: ice: ptp: don't WARN when controlling PF is unavailable In VFIO passthrough setups, it is possible to pass through only a PF which doesn't own the source timer. In that case the PTP controlling PF (adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp() returns NULL and triggers WARN_ON() in ice_ptp_setup_pf(). Since this is an expected behavior in that configuration, replace WARN_ON() with an informational message and return -EOPNOTSUPP.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix call trace with null VSI during VF reset During stress test with attaching and detaching VF from KVM and simultaneously changing VFs spoofcheck and trust there was a call trace in ice_reset_vf that VF's VSI is null. [145237.352797] WARNING: CPU: 46 PID: 840629 at drivers/net/ethernet/intel/ice/ice_vf_lib.c:508 ice_reset_vf+0x3d6/0x410 [ice] [145237.352851] Modules linked in: ice(E) vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio iavf dm_mod xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTC O_vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl ipmi_si intel_cstate ipmi_devintf joydev intel_uncore m ei_me ipmi_msghandler i2c_i801 pcspkr mei lpc_ich ioatdma i2c_smbus acpi_pad acpi_power_meter ip_tables xfs libcrc32c i2c_algo_bit drm_sh mem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft syscopyarea crc64 sysfillrect sg sysimgblt fb_sys_fops drm i40e ixgbe ahci libahci libata crc32c_intel mdio dca wmi fuse [last unloaded: ice] [145237.352917] CPU: 46 PID: 840629 Comm: kworker/46:2 Tainted: G S W I E 5.19.0-rc6+ #24 [145237.352921] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [145237.352923] Workqueue: ice ice_service_task [ice] [145237.352948] RIP: 0010:ice_reset_vf+0x3d6/0x410 [ice] [145237.352984] Code: 30 ec f3 cc e9 28 fd ff ff 0f b7 4b 50 48 c7 c2 48 19 9c c0 4c 89 ee 48 c7 c7 30 fe 9e c0 e8 d1 21 9d cc 31 c0 e9 a 9 fe ff ff <0f> 0b b8 ea ff ff ff e9 c1 fc ff ff 0f 0b b8 fb ff ff ff e9 91 fe [145237.352987] RSP: 0018:ffffb453e257fdb8 EFLAGS: 00010246 [145237.352990] RAX: ffff8bd0040181c0 RBX: ffff8be68db8f800 RCX: 0000000000000000 [145237.352991] RDX: 000000000000ffff RSI: 0000000000000000 RDI: ffff8be68db8f800 [145237.352993] RBP: ffff8bd0040181c0 R08: 0000000000001000 R09: ffff8bcfd520e000 [145237.352995] R10: 0000000000000000 R11: 00008417b5ab0bc0 R12: 0000000000000005 [145237.352996] R13: ffff8bcee061c0d0 R14: ffff8bd004019640 R15: 0000000000000000 [145237.352998] FS: 0000000000000000(0000) GS:ffff8be5dfb00000(0000) knlGS:0000000000000000 [145237.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [145237.353002] CR2: 00007fd81f651d68 CR3: 0000001a0fe10001 CR4: 00000000001726e0 [145237.353003] Call Trace: [145237.353008] <TASK> [145237.353011] ice_process_vflr_event+0x8d/0xb0 [ice] [145237.353049] ice_service_task+0x79f/0xef0 [ice] [145237.353074] process_one_work+0x1c8/0x390 [145237.353081] ? process_one_work+0x390/0x390 [145237.353084] worker_thread+0x30/0x360 [145237.353087] ? process_one_work+0x390/0x390 [145237.353090] kthread+0xe8/0x110 [145237.353094] ? kthread_complete_and_exit+0x20/0x20 [145237.353097] ret_from_fork+0x22/0x30 [145237.353103] </TASK> Remove WARN_ON() from check if VSI is null in ice_reset_vf. Add "VF is already removed\n" in dev_dbg(). This WARN_ON() is unnecessary and causes call trace, despite that call trace, driver still works. There is no need for this warn because this piece of code is responsible for disabling VF's Tx/Rx queues when VF is disabled, but when VF is already removed there is no need to do reset or disable queues.

In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask() Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask() stacking") introduced refcount-based GFP mask management that warns when pm_restore_gfp_mask() is called with saved_gfp_count == 0. Some hibernation paths call pm_restore_gfp_mask() defensively where the GFP mask may or may not be restricted depending on the execution path. For example, the uswsusp interface invokes it in SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release(). Before the stacking change this was a silent no-op; it now triggers a spurious WARNING. Remove the WARN_ON() wrapper from the !saved_gfp_count check while retaining the check itself, so that defensive calls remain harmless without producing false warnings. [ rjw: Subject tweak ]

In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix races between xattr_{set|get} and listxattr operations UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com

In the Linux kernel, the following vulnerability has been resolved: btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path Since the input data length passed to zlib_compress_folios() can be arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may cause read-in bytes to exceed the input range. Currently this triggers an assert in btrfs_compress_folios() on the debug kernel (see below). Fix strm.avail_in calculation for S390 hardware acceleration path. assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041 ------------[ cut here ]------------ kernel BUG at fs/btrfs/compression.c:1041! monitor event: 0040 ilc:2 [#1] PREEMPT SMP CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1 Hardware name: IBM 3931 A01 703 (z/VM 7.4.0) Workqueue: btrfs-delalloc btrfs_work_helper Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000 0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c 000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001 00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58 Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310 0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8 #0000021761df6534: af000000 mc 0,0 >0000021761df6538: 0707 bcr 0,%r7 0000021761df653a: 0707 bcr 0,%r7 0000021761df653c: 0707 bcr 0,%r7 0000021761df653e: 0707 bcr 0,%r7 0000021761df6540: c004004bb7ec brcl 0,000002176276d518 Call Trace: [<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0 ([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0) [<0000021761d97788>] compress_file_range+0x3b8/0x6d0 [<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160 [<0000021761645760>] process_one_work+0x2b0/0x5d0 [<000002176164637e>] worker_thread+0x20e/0x3e0 [<000002176165221a>] kthread+0x15a/0x170 [<00000217615b859c>] __ret_from_fork+0x3c/0x60 [<00000217626e72d2>] ret_from_fork+0xa/0x38 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000021761597924>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops

In the Linux kernel, the following vulnerability has been resolved: ext4: fix BUG_ON() when directory entry has invalid rec_len The rec_len field in the directory entry has to be a multiple of 4. A corrupted filesystem image can be used to hit a BUG() in ext4_rec_len_to_disk(), called from make_indexed_dir(). ------------[ cut here ]------------ kernel BUG at fs/ext4/ext4.h:2413! ... RIP: 0010:make_indexed_dir+0x53f/0x5f0 ... Call Trace: <TASK> ? add_dirent_to_buf+0x1b2/0x200 ext4_add_entry+0x36e/0x480 ext4_add_nondir+0x2b/0xc0 ext4_create+0x163/0x200 path_openat+0x635/0xe90 do_filp_open+0xb4/0x160 ? __create_object.isra.0+0x1de/0x3b0 ? _raw_spin_unlock+0x12/0x30 do_sys_openat2+0x91/0x150 __x64_sys_open+0x6c/0xa0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The fix simply adds a call to ext4_check_dir_entry() to validate the directory entry, returning -EFSCORRUPTED if the entry is invalid.

In the Linux kernel, the following vulnerability has been resolved: iommu/io-pgtable-arm: fix size_t signedness bug in unmap path __arm_lpae_unmap() returns size_t but was returning -ENOENT (negative error code) when encountering an unmapped PTE. Since size_t is unsigned, -ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE on 64-bit systems). This corrupted value propagates through the call chain: __arm_lpae_unmap() returns -ENOENT as size_t -> arm_lpae_unmap_pages() returns it -> __iommu_unmap() adds it to iova address -> iommu_pgsize() triggers BUG_ON due to corrupted iova This can cause IOVA address overflow in __iommu_unmap() loop and trigger BUG_ON in iommu_pgsize() from invalid address alignment. Fix by returning 0 instead of -ENOENT. The WARN_ON already signals the error condition, and returning 0 (meaning "nothing unmapped") is the correct semantic for size_t return type. This matches the behavior of other io-pgtable implementations (io-pgtable-arm-v7s, io-pgtable-dart) which return 0 on error conditions.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close When a process forks, the child process copies the parent's VMAs but the user_mapped reference count is not incremented. As a result, when both the parent and child processes exit, tracing_buffers_mmap_close() is called twice. On the second call, user_mapped is already 0, causing the function to return -ENODEV and triggering a WARN_ON. Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set. But this is only a hint, and the application can call madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the application does that, it can trigger this issue on fork. Fix it by incrementing the user_mapped reference count without re-mapping the pages in the VMA's open callback.

In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off.