Tenda G300-F router firmware version 16.01.14.2 and prior contain an OS command injection vulnerability in the WAN diagnostic functionality (formSetWanDiag). The implementation constructs a shell command that invokes curl and incorporates attacker-controlled input into the command line without adequate neutralization. As a result, a remote attacker with access to the affected management interface can inject additional shell syntax and execute arbitrary commands on the device with the privileges of the management process.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

AP180 series with firmware versions prior to AP_RGOS 11.9(4)B1P8 contains an OS command injection vulnerability. If this vulnerability is exploited, arbitrary commands may be executed on the devices.

A security vulnerability has been detected in D-Link DIR-823X 250416. This affects the function sub_4175CC of the file /goform/set_static_route_table. Such manipulation of the argument interface/destip/netmask/gateway/metric leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A command injection vulnerability may be exploited after the admin's authentication in the VPN server configuration module on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A vulnerability was determined in UTT 进取 521G 3.1.1-190816. The impacted element is the function sub_446B18 of the file /goform/formPdbUpConfig. Executing a manipulation of the argument policyNames can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

Sewio’s Real-Time Location System (RTLS) Studio version 2.0.0 up to and including version 2.6.2 does not properly validate the input module name to the monitor services of the software. This could allow a remote attacker to access sensitive functions of the application and execute arbitrary system commands.

A security vulnerability has been detected in D-Link DIR-823X 250416. This issue affects some unknown processing of the file /goform/set_ddns of the component DDNS Service. The manipulation of the argument ddnsType/ddnsDomainName/ddnsUserName/ddnsPwd leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

An authenticated administrator is allowed to remotely execute arbitrary shell commands via the API. POC http://<IP_ADDRESS>/qstorapi/storageSystemModify?storageSystem=&newName=quantastor&newDescription=;ls${IFS}-al&newLocation=4&newEnclosureLayoutId=5&newDnsServerList=;ls${IFS}-al&externalHostName=&newNTPServerList=;ls${IFS}-al

OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, under certain conditions, an authenticated privileged user, can use a malicious string in the SNMP options of a Device, performing command injection and obtaining remote code execution on the underlying server. The `lib/snmp.php` file has a set of functions, with similar behavior, that accept in input some variables and place them into an `exec` call without a proper escape or validation. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An issue was discovered in certain Oi third-party firmware that may be installed on Technicolor TD5130v2 devices. A Command Injection in the Ping module in the Web Interface in OI_Fw_V20 allows remote attackers to execute arbitrary OS commands in the pingAddr parameter to mnt_ping.cgi. NOTE: This may overlap CVE-2017–14127.

Proself Enterprise/Standard Edition Ver5.61 and earlier, Proself Gateway Edition Ver1.62 and earlier, and Proself Mail Sanitize Edition Ver1.07 and earlier allow a remote authenticated attacker with an administrative privilege to execute arbitrary OS commands.

A command injection vulnerability may be exploited after the admin's authentication in the VPN Connection Service on the Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

An issue in Dolibarr ERP CRM v.17.0.1 and before allows a remote privileged attacker to execute arbitrary code via a crafted command/script.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later

An OScommand injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [8] the devname variable, that has the value of the name parameter provided through the SetDevName API, is not validated properly. This would lead to an OS command injection.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [4] the dns_data->dns1 variable, that has the value of the dns1 parameter provided through the SetLocal API, is not validated properly. This would lead to an OS command injection.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->domain variable, that has the value of the domain parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the web interface mac2name functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiAnalyzer version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiManager version 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.13, 6.4.0 through 6.4.15 and 6.2.2 through 6.2.13, Fortinet FortiAnalyzer BigData version 7.4.0, 7.2.0 through 7.2.7, 7.0.1 through 7.0.6, 6.4.5 through 6.4.7 and 6.2.5, Fortinet FortiAnalyzer Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 and Fortinet FortiManager Cloud version 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.13 and 6.4.1 through 6.4.7 GUI allows an authenticated privileged attacker to execute unauthorized code or commands via crafted HTTPS or HTTP requests.

Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

AdTran 834-5 HDC17600021F1 (SmartOS 11.1.1.1) devices enable the SSH service by default and have a hidden, undocumented, hard-coded support account whose password is based on the devices MAC address. All of the devices internet interfaces share a similar MAC address that only varies in their final octet. This allows network-adjacent attackers to derive the support user's SSH password by decrementing the final octet of the connected gateway address or via the BSSID. An attacker can then execute arbitrary OS commands with root-level privileges. NOTE: The vendor states that there is no intended functionality allowing an attacker to execute arbitrary OS Commands with root-level privileges. The vendor also states that this issue was fixed in SmartOS 12.5.5.1.

A vulnerability regarding improper neutralization of special elements used in an OS command ('OS Command Injection') is found in the NTP configuration. This allows remote authenticated users with administrator privileges to execute arbitrary commands via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.7-0298 may be affected: BC500 and TC500.

MangoOS before 5.2.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Process Command feature.

A privilege escalation vulnerability was discovered in the web interface or SSH captive command shell interface of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via a specially crafted request.

A privilege escalation vulnerability was discovered in XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted IPMI commands.

A privilege escalation vulnerability was discovered in the SSH captive command shell interface that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A privilege escalation vulnerability was discovered in an upload processing functionality of XCC that could allow an authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with SNMPv2 write privileges may use an a special SNMP request to gain full access to the device.

A security flaw has been discovered in D-Link DIR-823X 250416. The affected element is the function sub_4208A0 of the file /goform/set_dmz of the component Configuration Handler. The manipulation of the argument dmz_host/dmz_enable results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

FutureNet NXR series, VXR series and WXR series provided by Century Systems Co., Ltd. contain an active debug code vulnerability. If a user who knows how to use the debug function logs in to the product, the debug function may be used and an arbitrary OS command may be executed.

Adobe Commerce versions 2.4.6-p1 (and earlier), 2.4.5-p3 (and earlier) and 2.4.4-p4 (and earlier) are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could lead to arbitrary code execution by an admin-privilege authenticated attacker. Exploitation of this issue does not require user interaction.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

An exploitable command injection vulnerability exists in the cloud connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject operating system commands into the TimeoutPrepared parameter value contained in the firmware update command.

An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)

Firmware in KAON AR2140 routers, prior to versions 3.2.50 and 4.2.16, is vulnerable to a shell command injection via sending a crafted request to one of the endpoints. In order to exploit this vulnerability, one has to have access to the administrative portal of the router.

An exploitable command injection vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject OS commands into the TimeoutUnconfirmed parameter value contained in the Firmware Update command.

An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.

Improper Neutralization of commands allowed to be executed via OTRS System Configuration e.g. SchedulerCronTaskModule using UnitTests modules allows any authenticated attacker with admin privileges local execution of Code.This issue affects OTRS: from 7.0.X before 7.0.45, from 8.0.X before 8.0.35; ((OTRS)) Community Edition: from 6.0.1 through 6.0.34.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.