In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop.

There is a logic error in io_uring's implementation which can be used to trigger a use-after-free vulnerability leading to privilege escalation. In the io_prep_async_work function the assumption that the last io_grab_identity call cannot return false is not true, and in this case the function will use the init_cred or the previous linked requests identity to do operations instead of using the current identity. This can lead to reference counting issues causing use-after-free. We recommend upgrading past version 5.10.161.

In the Linux kernel 5.11 through 5.12.2, isotp_setsockopt in net/can/isotp.c allows privilege escalation to root by leveraging a use-after-free. (This does not affect earlier versions that lack CAN ISOTP SF_BROADCAST support.)

An issue was discovered in the Linux kernel through 4.18.8. The vmacache_flush_all function in mm/vmacache.c mishandles sequence number overflows. An attacker can trigger a use-after-free (and possibly gain privileges) via certain thread creation, map, unmap, invalidation, and dereference operations.

Use After Free vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (bluetooth modules) allows Local Execution of Code. This vulnerability is associated with program files https://gitee.Com/anolis/cloud-kernel/blob/devel-5.10/net/bluetooth/af_bluetooth.C. This issue affects Linux kernel: from v2.6.12-rc2 before v6.8-rc1.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces wilc_netdev_cleanup currently triggers a KASAN warning, which can be observed on interface registration error path, or simply by removing the module/unbinding device from driver: echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind ================================================================== BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc Read of size 4 at addr c54d1ce8 by task sh/86 CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from print_report+0x154/0x500 print_report from kasan_report+0xac/0xd8 kasan_report from wilc_netdev_cleanup+0x508/0x5cc wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec wilc_bus_remove from spi_remove+0x8c/0xac spi_remove from device_release_driver_internal+0x434/0x5f8 device_release_driver_internal from unbind_store+0xbc/0x108 unbind_store from kernfs_fop_write_iter+0x398/0x584 kernfs_fop_write_iter from vfs_write+0x728/0xf88 vfs_write from ksys_write+0x110/0x1e4 ksys_write from ret_fast_syscall+0x0/0x1c [...] Allocated by task 1: kasan_save_track+0x30/0x5c __kasan_kmalloc+0x8c/0x94 __kmalloc_node+0x1cc/0x3e4 kvmalloc_node+0x48/0x180 alloc_netdev_mqs+0x68/0x11dc alloc_etherdev_mqs+0x28/0x34 wilc_netdev_ifc_init+0x34/0x8ec wilc_cfg80211_init+0x690/0x910 wilc_bus_probe+0xe0/0x4a0 spi_probe+0x158/0x1b0 really_probe+0x270/0xdf4 __driver_probe_device+0x1dc/0x580 driver_probe_device+0x60/0x140 __driver_attach+0x228/0x5d4 bus_for_each_dev+0x13c/0x1a8 bus_add_driver+0x2a0/0x608 driver_register+0x24c/0x578 do_one_initcall+0x180/0x310 kernel_init_freeable+0x424/0x484 kernel_init+0x20/0x148 ret_from_fork+0x14/0x28 Freed by task 86: kasan_save_track+0x30/0x5c kasan_save_free_info+0x38/0x58 __kasan_slab_free+0xe4/0x140 kfree+0xb0/0x238 device_release+0xc0/0x2a8 kobject_put+0x1d4/0x46c netdev_run_todo+0x8fc/0x11d0 wilc_netdev_cleanup+0x1e4/0x5cc wilc_bus_remove+0xc8/0xec spi_remove+0x8c/0xac device_release_driver_internal+0x434/0x5f8 unbind_store+0xbc/0x108 kernfs_fop_write_iter+0x398/0x584 vfs_write+0x728/0xf88 ksys_write+0x110/0x1e4 ret_fast_syscall+0x0/0x1c [...] David Mosberger-Tan initial investigation [1] showed that this use-after-free is due to netdevice unregistration during vif list traversal. When unregistering a net device, since the needs_free_netdev has been set to true during registration, the netdevice object is also freed, and as a consequence, the corresponding vif object too, since it is attached to it as private netdevice data. The next occurrence of the loop then tries to access freed vif pointer to the list to move forward in the list. Fix this use-after-free thanks to two mechanisms: - navigate in the list with list_for_each_entry_safe, which allows to safely modify the list as we go through each element. For each element, remove it from the list with list_del_rcu - make sure to wait for RCU grace period end after each vif removal to make sure it is safe to free the corresponding vif too (through unregister_netdev) Since we are in a RCU "modifier" path (not a "reader" path), and because such path is expected not to be concurrent to any other modifier (we are using the vif_mutex lock), we do not need to use RCU list API, that's why we can benefit from list_for_each_entry_safe. [1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/

A flaw was found in the crypto subsystem of the Linux kernel before version kernel-4.15-rc4. The "null skcipher" was being dropped when each af_alg_ctx was freed instead of when the aead_tfm was freed. This can cause the null skcipher to be freed while it is still in use leading to a local user being able to crash the system or possibly escalate privileges.

In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free during gpu recovery [Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The nft_verdict_init() function allows positive values as drop error within the hook verdict, and hence the nf_hook_slow() function can cause a double free vulnerability when NF_DROP is issued with a drop error which resembles NF_ACCEPT. We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

A use-after-free flaw was found in the Linux Kernel. When a disk is removed, bdi_unregister is called to stop further write-back and waits for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation work after this has completed, which can result in the timer attempting to access the recently freed bdi_writeback.

In the Linux kernel before 5.3.11, sound/core/timer.c has a use-after-free caused by erroneous code refactoring, aka CID-e7af6307a8a5. This is related to snd_timer_open and snd_timer_close_locked. The timeri variable was originally intended to be for a newly created timer instance, but was used for a different purpose after refactoring.

In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: axg-card: fix 'use-after-free' Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194

A use-after-free vulnerability in the Linux kernel's ipv4: igmp component can be exploited to achieve local privilege escalation. A race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread. We recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.

In the Linux kernel, the following vulnerability has been resolved: blk-throttle: Set BIO_THROTTLED when bio has been throttled 1.In current process, all bio will set the BIO_THROTTLED flag after __blk_throtl_bio(). 2.If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.But in the current process, if bio is throttled. The BIO_THROTTLED will be set to bio after timer start. If the bio has been completed, it may cause use-after-free blow. BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70 Read of size 2 at addr ffff88801b8902d4 by task fio/26380 dump_stack+0x9b/0xce print_address_description.constprop.6+0x3e/0x60 kasan_report.cold.9+0x22/0x3a blk_throtl_bio+0x12f0/0x2c70 submit_bio_checks+0x701/0x1550 submit_bio_noacct+0x83/0xc80 submit_bio+0xa7/0x330 mpage_readahead+0x380/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 26380: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.2+0xc1/0xd0 kmem_cache_alloc+0x146/0x440 mempool_alloc+0x125/0x2f0 bio_alloc_bioset+0x353/0x590 mpage_alloc+0x3b/0x240 do_mpage_readpage+0xddf/0x1ef0 mpage_readahead+0x264/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: kasan_save_stack+0x19/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x1b/0x30 __kasan_slab_free+0x111/0x160 kmem_cache_free+0x94/0x460 mempool_free+0xd6/0x320 bio_free+0xe0/0x130 bio_put+0xab/0xe0 bio_endio+0x3a6/0x5d0 blk_update_request+0x590/0x1370 scsi_end_request+0x7d/0x400 scsi_io_completion+0x1aa/0xe50 scsi_softirq_done+0x11b/0x240 blk_mq_complete_request+0xd4/0x120 scsi_mq_done+0xf0/0x200 virtscsi_vq_done+0xbc/0x150 vring_interrupt+0x179/0x390 __handle_irq_event_percpu+0xf7/0x490 handle_irq_event_percpu+0x7b/0x160 handle_irq_event+0xcc/0x170 handle_edge_irq+0x215/0xb20 common_interrupt+0x60/0x120 asm_common_interrupt+0x1e/0x40 Fix this by move BIO_THROTTLED set into the queue_lock.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free. We recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.

A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Job should reference MMU not file_priv For a while now it's been allowed for a MMU context to outlive it's corresponding panfrost_priv, however the job structure still references panfrost_priv to get hold of the MMU context. If panfrost_priv has been freed this is a use-after-free which I've been able to trigger resulting in a splat. To fix this, drop the reference to panfrost_priv in the job structure and add a direct reference to the MMU structure which is what's actually needed.

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix UAF in cifs_demultiplex_thread() There is a UAF when xfstests on cifs: BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160 Read of size 4 at addr ffff88810103fc08 by task cifsd/923 CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45 ... Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 kasan_check_range+0x145/0x1a0 smb2_is_network_name_deleted+0x27/0x160 cifs_demultiplex_thread.cold+0x172/0x5a4 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 923: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x147/0x320 mempool_alloc+0xe1/0x260 cifs_small_buf_get+0x24/0x60 allocate_buffers+0xa1/0x1c0 cifs_demultiplex_thread+0x199/0x10d0 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 Freed by task 921: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 kmem_cache_free+0xe3/0x4d0 cifs_small_buf_release+0x29/0x90 SMB2_negotiate+0x8b7/0x1c60 smb2_negotiate+0x51/0x70 cifs_negotiate_protocol+0xf0/0x160 cifs_get_smb_ses+0x5fa/0x13c0 mount_get_conns+0x7a/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The UAF is because: mount(pid: 921) | cifsd(pid: 923) -------------------------------|------------------------------- | cifs_demultiplex_thread SMB2_negotiate | cifs_send_recv | compound_send_recv | smb_send_rqst | wait_for_response | wait_event_state [1] | | standard_receive3 | cifs_handle_standard | handle_mid | mid->resp_buf = buf; [2] | dequeue_mid [3] KILL the process [4] | resp_iov[i].iov_base = buf | free_rsp_buf [5] | | is_network_name_deleted [6] | callback 1. After send request to server, wait the response until mid->mid_state != SUBMITTED; 2. Receive response from server, and set it to mid; 3. Set the mid state to RECEIVED; 4. Kill the process, the mid state already RECEIVED, get 0; 5. Handle and release the negotiate response; 6. UAF. It can be easily reproduce with add some delay in [3] - [6]. Only sync call has the problem since async call's callback is executed in cifsd process. Add an extra state to mark the mid state to READY before wakeup the waitter, then it can get the resp safely.

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] u ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: nfc: Fix use-after-free in local_cleanup() Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301)

In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: Fix a potential UAF in ca8210_probe If of_clk_add_provider() fails in ca8210_register_ext_clock(), it calls clk_unregister() to release priv->clk and returns an error. However, the caller ca8210_probe() then calls ca8210_remove(), where priv->clk is freed again in ca8210_unregister_ext_clock(). In this case, a use-after-free may happen in the second time we call clk_unregister(). Fix this by removing the first clk_unregister(). Also, priv->clk could be an error code on failure of clk_register_fixed_rate(). Use IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock().

In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is returned.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER) Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop().

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a race condition between btf_put() and map_free() When running `./test_progs -j` in my local vm with latest kernel, I once hit a kasan error like below: [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0 [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830 [ 1887.186498] [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G OEL 6.7.0-rc3-00699-g90679706d486-dirty #494 [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred [ 1887.190341] Call Trace: [ 1887.190666] <TASK> [ 1887.190949] dump_stack_lvl+0xac/0xe0 [ 1887.191423] ? nf_tcp_handle_invalid+0x1b0/0x1b0 [ 1887.192019] ? panic+0x3c0/0x3c0 [ 1887.192449] print_report+0x14f/0x720 [ 1887.192930] ? preempt_count_sub+0x1c/0xd0 [ 1887.193459] ? __virt_addr_valid+0xac/0x120 [ 1887.194004] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.194572] kasan_report+0xc3/0x100 [ 1887.195085] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.195668] bpf_rb_root_free+0x1f8/0x2b0 [ 1887.196183] ? __bpf_obj_drop_impl+0xb0/0xb0 [ 1887.196736] ? preempt_count_sub+0x1c/0xd0 [ 1887.197270] ? preempt_count_sub+0x1c/0xd0 [ 1887.197802] ? _raw_spin_unlock+0x1f/0x40 [ 1887.198319] bpf_obj_free_fields+0x1d4/0x260 [ 1887.198883] array_map_free+0x1a3/0x260 [ 1887.199380] bpf_map_free_deferred+0x7b/0xe0 [ 1887.199943] process_scheduled_works+0x3a2/0x6c0 [ 1887.200549] worker_thread+0x633/0x890 [ 1887.201047] ? __kthread_parkme+0xd7/0xf0 [ 1887.201574] ? kthread+0x102/0x1d0 [ 1887.202020] kthread+0x1ab/0x1d0 [ 1887.202447] ? pr_cont_work+0x270/0x270 [ 1887.202954] ? kthread_blkcg+0x50/0x50 [ 1887.203444] ret_from_fork+0x34/0x50 [ 1887.203914] ? kthread_blkcg+0x50/0x50 [ 1887.204397] ret_from_fork_asm+0x11/0x20 [ 1887.204913] </TASK> [ 1887.204913] </TASK> [ 1887.205209] [ 1887.205416] Allocated by task 2197: [ 1887.205881] kasan_set_track+0x3f/0x60 [ 1887.206366] __kasan_kmalloc+0x6e/0x80 [ 1887.206856] __kmalloc+0xac/0x1a0 [ 1887.207293] btf_parse_fields+0xa15/0x1480 [ 1887.207836] btf_parse_struct_metas+0x566/0x670 [ 1887.208387] btf_new_fd+0x294/0x4d0 [ 1887.208851] __sys_bpf+0x4ba/0x600 [ 1887.209292] __x64_sys_bpf+0x41/0x50 [ 1887.209762] do_syscall_64+0x4c/0xf0 [ 1887.210222] entry_SYSCALL_64_after_hwframe+0x63/0x6b [ 1887.210868] [ 1887.211074] Freed by task 36: [ 1887.211460] kasan_set_track+0x3f/0x60 [ 1887.211951] kasan_save_free_info+0x28/0x40 [ 1887.212485] ____kasan_slab_free+0x101/0x180 [ 1887.213027] __kmem_cache_free+0xe4/0x210 [ 1887.213514] btf_free+0x5b/0x130 [ 1887.213918] rcu_core+0x638/0xcc0 [ 1887.214347] __do_softirq+0x114/0x37e The error happens at bpf_rb_root_free+0x1f8/0x2b0: 00000000000034c0 <bpf_rb_root_free>: ; { 34c0: f3 0f 1e fa endbr64 34c4: e8 00 00 00 00 callq 0x34c9 <bpf_rb_root_free+0x9> 34c9: 55 pushq %rbp 34ca: 48 89 e5 movq %rsp, %rbp ... ; if (rec && rec->refcount_off >= 0 && 36aa: 4d 85 ed testq %r13, %r13 36ad: 74 a9 je 0x3658 <bpf_rb_root_free+0x198> 36af: 49 8d 7d 10 leaq 0x10(%r13), %rdi 36b3: e8 00 00 00 00 callq 0x36b8 <bpf_rb_root_free+0x1f8> <==== kasan function 36b8: 45 8b 7d 10 movl 0x10(%r13), %r15d <==== use-after-free load 36bc: 45 85 ff testl %r15d, %r15d 36bf: 78 8c js 0x364d <bpf_rb_root_free+0x18d> So the problem ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix use-after-free in rdata->read_into_pages() When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement.

In the Linux kernel, the following vulnerability has been resolved: net: fix UaF in netns ops registration error path If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix htt mlo-offset event locking The ath12k active pdevs are protected by RCU but the htt mlo-offset event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access.

In the Linux kernel, the following vulnerability has been resolved: perf: hisi: Fix use-after-free when register pmu fails When we fail to register the uncore pmu, the pmu context may not been allocated. The error handing will call cpuhp_state_remove_instance() to call uncore pmu offline callback, which migrate the pmu context. Since that's liable to lead to some kind of use-after-free. Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been failed to register.

In the Linux kernel, the following vulnerability has been resolved: mctp: perform route lookups under a RCU read-side lock Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <rootlab@huawei.com>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion.

In the Linux kernel, the following vulnerability has been resolved: IORING_OP_READ did not correctly consume the provided buffer list when read i/o returned < 0 (except for -EAGAIN and -EIOCBQUEUED return). This can lead to a potential use-after-free when the completion via io_rw_done runs at separate context.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: Fix UAF in bcm_proc_show() BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80 Read of size 8 at addr ffff888155846230 by task cat/7862 CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xd5/0x150 print_report+0xc1/0x5e0 kasan_report+0xba/0xf0 bcm_proc_show+0x969/0xa80 seq_read_iter+0x4f6/0x1260 seq_read+0x165/0x210 proc_reg_read+0x227/0x300 vfs_read+0x1d5/0x8d0 ksys_read+0x11e/0x240 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Allocated by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x9e/0xa0 bcm_sendmsg+0x264b/0x44e0 sock_sendmsg+0xda/0x180 ____sys_sendmsg+0x735/0x920 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x161/0x1c0 slab_free_freelist_hook+0x119/0x220 __kmem_cache_free+0xb4/0x2e0 rcu_core+0x809/0x1bd0 bcm_op is freed before procfs entry be removed in bcm_release(), this lead to bcm_proc_show() may read the freed bcm_op.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid potential vm use-after-free Adding the vm to the vm_xa table makes it visible to userspace, which could try to race with us to close the vm. So we need to take our extra reference before putting it in the table. (cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_read (drivers/tty/vt/vc_screen.c:415) vfs_read (fs/read_write.c:468 fs/read_write.c:450) ... </TASK> Allocated by task 1191: ... kmalloc_trace (mm/slab_common.c:1069) vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720 drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108) con_install (drivers/tty/vt/vt.c:3383) tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413 drivers/tty/tty_io.c:1390) tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:883) vfs_open (fs/open.c:1014) ... Freed by task 1548: ... kfree (mm/slab_common.c:1021) vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2776) ... The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of 1024-byte region [ffff888113747800, ffff888113747c00) The buggy address belongs to the physical page: page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x113740 head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock*

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381

In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap.

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix gtk offload status event locking The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

A use-after-free vulnerability in the Linux kernel's fs/smb/client component can be exploited to achieve local privilege escalation. In case of an error in smb3_fs_context_parse_param, ctx->password was freed but the field was not set to NULL which could lead to double free. We recommend upgrading past commit e6e43b8aa7cd3c3af686caf0c2e11819a886d705.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again.

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix use after free in rmi_unregister_function() The put_device() calls rmi_release_function() which frees "fn" so the dereference on the next line "fn->num_of_irqs" is a use after free. Move the put_device() to the end to fix this.