Communication between the client and the server application of the affected products is partially done using CORBA (Common Object Request Broker Architecture) over TCP/IP. This protocol is not encrypted and allows tracing of internal messages. This issue affects * FOXMAN-UN product: FOXMAN-UN R15B, FOXMAN-UN R15A, FOXMAN-UN R14B, FOXMAN-UN R14A, FOXMAN-UN R11B, FOXMAN-UN R11A, FOXMAN-UN R10C, FOXMAN-UN R9C; * UNEM product: UNEM R15B, UNEM R15A, UNEM R14B, UNEM R14A, UNEM R11B, UNEM R11A, UNEM R10C, UNEM R9C. List of CPEs: * cpe:2.3:a:hitachienergy:foxman-un:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R9C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R9C:*:*:*:*:*:*:*

The product exposes a service that is intended for local only to all network interfaces without any authentication.

ABB MicroSCADA Pro SYS600 version 9.3 suffers from an instance of CWE-306: Missing Authentication for Critical Function.

vulnerability exists in the FOXMAN-UN/UNEM server / API Gateway that if exploited an attacker could use to allow unintended commands or code to be executed on the UNEM server allowing sensitive data to be read or modified or could cause other unintended behavior

The affected products store both public and private key that are used to sign and protect Custom Parameter Set (CPS) file from modification. An attacker that manages to exploit this vulnerability will be able to change the CPS file, sign it so that it is trusted as the legitimate CPS file. This issue affects * FOXMAN-UN product: FOXMAN-UN R15B, FOXMAN-UN R15A, FOXMAN-UN R14B, FOXMAN-UN R14A, FOXMAN-UN R11B, FOXMAN-UN R11A, FOXMAN-UN R10C, FOXMAN-UN R9C; * UNEM product: UNEM R15B, UNEM R15A, UNEM R14B, UNEM R14A, UNEM R11B, UNEM R11A, UNEM R10C, UNEM R9C. List of CPEs: * cpe:2.3:a:hitachienergy:foxman-un:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R9C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R9C:*:*:*:*:*:*:*

In the DES implementation, the affected product versions use a default key for encryption. Successful exploitation allows an attacker to obtain sensitive information and gain access to the network elements that are managed by the affected products versions. This issue affects * FOXMAN-UN product: FOXMAN-UN R16A, FOXMAN-UN R15B, FOXMAN-UN R15A, FOXMAN-UN R14B, FOXMAN-UN R14A, FOXMAN-UN R11B, FOXMAN-UN R11A, FOXMAN-UN R10C, FOXMAN-UN R9C; * UNEM product: UNEM R16A, UNEM R15B, UNEM R15A, UNEM R14B, UNEM R14A, UNEM R11B, UNEM R11A, UNEM R10C, UNEM R9C. List of CPEs: * cpe:2.3:a:hitachienergy:foxman-un:R16A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:foxman-un:R9C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R16A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R15A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R14A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11B:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R11A:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R10C:*:*:*:*:*:*:* * cpe:2.3:a:hitachienergy:unem:R9C:*:*:*:*:*:*:*

A vulnerability exists in HCI IEC 60870-5-104 function included in certain versions of the RTU500 series product. The vulnerability can only be exploited, if the HCI 60870-5-104 is configured with support for IEC 62351-3. After session resumption interval is expired an RTU500 initiated update of session parameters causes an unexpected restart due to a stack overflow.

A vulnerability exists in the HCI Modbus TCP function included in the product versions listed above. If the HCI Modbus TCP is enabled and configured, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500 in a high rate, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a lack of flood control which eventually if exploited causes an internal stack overflow in the HCI Modbus TCP function.

A heap-based buffer overflow vulnerability exists in XML parser functionality in the HiDraw. An authenticated malicious user with local access can exploit this vulnerability using a specially crafted XML file which may lead to memory corruption and potential arbitrary code execution. Successful exploitation could result in application crashes (denial of service) and compromise the confidentiality and integrity of the affected system.

A Stack-based Buffer Overflow issue was discovered in Fuji Electric V-Server VPR 4.0.1.0 and prior. The stack-based buffer overflow vulnerability has been identified, which may allow remote code execution.

Adobe Acrobat and Reader versions 2018.009.20050 and earlier, 2017.011.30070 and earlier, 2015.006.30394 and earlier have an exploitable out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

A Stack-based Buffer Overflow issue was discovered in GE D60 Line Distance Relay devices running firmware Version 7.11 and prior. Multiple stack-based buffer overflow vulnerabilities have been identified, which may allow remote code execution.

In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request.

In D-LINK Go-RT-AC750 v101b03, the sprintf function in the sub_40E700 function within the cgibin is susceptible to stack overflow.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, a size_t underflow in the IMA-ADPCM and MS-ADPCM audio decoders leads to heap-buffer-overflow write via the RDPSND audio channel. In libfreerdp/codec/dsp.c, the IMA-ADPCM and MS-ADPCM decoders subtract block header sizes from a size_t variable without checking for underflow. When nBlockAlign (received from the server) is set such that size % block_size == 0 triggers the header parsing at a point where size is smaller than the header (4 or 8 bytes), the subtraction wraps size to ~SIZE_MAX. The while (size > 0) loop then continues for an astronomical number of iterations. This vulnerability is fixed in 3.24.0.

An exploitable code execution vulnerability exists in the XML_UploadFile Wi-Fi command of the NT9665X Chipset firmware, running on the Anker Roav A1 Dashcam, version RoavA1SWV1.9. A specially crafted packet can cause a stack-based buffer overflow, resulting in code execution.

An exploitable code execution vulnerability exists in Wi-Fi Command 9999 of the Roav A1 Dashcam running version RoavA1SWV1.9. A specially crafted packet can cause a stack-based buffer overflow, resulting in code execution. An attacker can send a packet to trigger this vulnerability.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, the gdi_surface_bits() function processes SURFACE_BITS_COMMAND messages sent by the RDP server. When the command is handled using NSCodec, the bmp.width and bmp.height values provided by the server are not properly validated against the actual desktop dimensions. A malicious RDP server can supply crafted bmp.width and bmp.height values that exceed the expected surface size. Because these values are used during bitmap decoding and memory operations without proper bounds checking, this can lead to a heap buffer overflow. Since the attacker can also control the associated pixel data transmitted by the server, the overflow may be exploitable to overwrite adjacent heap memory. This vulnerability is fixed in 3.24.0.

An exploitable heap overflow vulnerability exists in the mdnscap binary of the CUJO Smart Firewall running firmware 7003. The string lengths are handled incorrectly when parsing character strings in mDNS resource records, leading to arbitrary code execution in the context of the mdnscap process. An unauthenticated attacker can send an mDNS message to trigger this vulnerability.

DBI versions before 1.648 for Perl saved errors in a limited-sized buffer. Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit. Attackers that can influence the error text in an application can trigger a buffer overflow.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. Within the handler function of the /goform/addassignment route, a very long text entry for the"'s_ip" and "s_mac" fields could lead to a Stack-Based Buffer Overflow and overwrite the return address.

Command injection and stack-based buffer overflow vulnerabilities in the KillDupUsr_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Issue summary: Converting an excessively large OCTET STRING value to a hexadecimal string leads to a heap buffer overflow on 32 bit platforms. Impact summary: A heap buffer overflow may lead to a crash or possibly an attacker controlled code execution or other undefined behavior. If an attacker can supply a crafted X.509 certificate with an excessively large OCTET STRING value in extensions such as the Subject Key Identifier (SKID) or Authority Key Identifier (AKID) which are being converted to hex, the size of the buffer needed for the result is calculated as multiplication of the input length by 3. On 32 bit platforms, this multiplication may overflow resulting in the allocation of a smaller buffer and a heap buffer overflow. Applications and services that print or log contents of untrusted X.509 certificates are vulnerable to this issue. As the certificates would have to have sizes of over 1 Gigabyte, printing or logging such certificates is a fairly unlikely operation and only 32 bit platforms are affected, this issue was assigned Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2501.0001), Opcenter Intelligence (All versions < V2501.0001), Opcenter Quality (All versions < V2512), Opcenter RDnL (All versions < V2410), SIMATIC PCS neo V4.0 (All versions), SIMATIC PCS neo V4.1 (All versions < V4.1 Update 3), SIMATIC PCS neo V5.0 (All versions < V5.0 Update 1), SINEC NMS (All versions if operated in conjunction with UMC < V2.15), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions), Totally Integrated Automation Portal (TIA Portal) V18 (All versions), Totally Integrated Automation Portal (TIA Portal) V19 (All versions). Affected products contain a heap-based buffer overflow vulnerability in the integrated UMC component. This could allow an unauthenticated remote attacker to execute arbitrary code.

A stack-based buffer overflow vulnerability in a subfunction of the Login_handler_func function of spx_restservice allows an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

NICO-FTP 3.0.1.19 contains a structured exception handler buffer overflow vulnerability that allows remote attackers to execute arbitrary code by sending crafted FTP commands. Attackers can connect to the FTP service and send oversized data in response handlers to overwrite SEH pointers and redirect execution to injected shellcode.

An issue was discovered in the actix-web crate before 0.7.15 for Rust. It can add the Send marker trait to an object that cannot be sent between threads safely, leading to memory corruption.

Command injection and multiple stack-based buffer overflows vulnerabilities in the modifyUserb_func function of spx_restservice allow an authenticated attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Tenda AC1206 V15.03.06.23 was discovered to contain a stack overflow via the function formSetClientState.

Tenda AC1206 V15.03.06.23 was discovered to contain a stack overflow via the page parameter in the function fromAddressNat.

A heap buffer overflow vulnerability inside of BMP image processing was found at [core] module of ONLYOFFICE DocumentServer v4.0.0-9-v6.0.0. Using this vulnerability, an attacker is able to gain remote code executions on DocumentServer.

GNU Barcode 0.99 contains a buffer overflow vulnerability in its code 93 encoding process that allows attackers to trigger memory corruption. Attackers can exploit boundary errors during input file processing to potentially execute arbitrary code on the affected system.

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function Edit_BasicSSID.

Unsafe Parsing of a PNG tRNS chunk in FastStone Image Viewer through 7.5 results in a stack buffer overflow.

Multiple command injections and stack-based buffer overflows vulnerabilities in the SubNet_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Out of bounds read and write in Tint in Google Chrome on Mac prior to 145.0.7632.116 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

XML::Parser versions through 2.45 for Perl could overflow the pre-allocated buffer size cause a heap corruption (double free or corruption) and crashes. A :utf8 PerlIO layer, parse_stream() in Expat.xs could overflow the XML input buffer because Perl's read() returns decoded characters while SvPV() gives back multi-byte UTF-8 bytes that can exceed the pre-allocated buffer size. This can cause heap corruption (double free or corruption) and crashes.

Tenda AC10 v4 US_AC10V4.0si_V16.03.10.13_cn was discovered to contain a stack overflow via parameter list and bindnum at /goform/SetIpMacBind.

D-Link DSL-320B-D1 devices through EU_1.25 are prone to multiple Stack-Based Buffer Overflows that allow unauthenticated remote attackers to take over a device via the login.xgi user and pass parameters. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An exploitable stack-based buffer overflow vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera. A specially crafted http request can cause a stack-based buffer overflow resulting in overwriting arbitrary data on the stack frame. An attacker can simply send an http request to the device to trigger this vulnerability.

Tenda A15 V15.13.07.13 was discovered to contain a stack overflow via the wepkey2 parameter at /goform/WifiBasicSet.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. In 2026.01 and earlier, the default handler for the well_known_core resource coap_well_known_core_default_handler writes user-provided option data and other data into a fixed size buffer without validating the buffer is large enough to contain the response. This vulnerability allows an attacker to corrupt neighboring stack location, including security-sensitive addresses like the return address, leading to denial of service or arbitrary code execution.

Tenda A15 V15.13.07.13 was discovered to contain a stack overflow via the wrlEn_5g parameter at /goform/WifiBasicSet.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the cameo.cameo.nslookup_target parameter in the tools_nslookup function.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the qcawifi.wifi%d_vap%d.maclist parameter in the kick_ban_wifi_mac_allow (sub_415B00) function.

Tenda A15 V15.13.07.13 was discovered to contain a stack overflow via the ssid parameter at /goform/WifiBasicSet.

Delta Electronics ISPSoft version 3.20 is vulnerable to a Stack-Based buffer overflow vulnerability that could allow an attacker to leverage debugging logic to execute arbitrary code when parsing CBDGL file.

TRENDnet TEW755AP 1.13B01 was discovered to contain a stack overflow via the wps_sta_enrollee_pin parameter in the set_sta_enrollee_pin_5g function.