A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, local attacker to enable audio recording without notifying users. The vulnerability is due to the presence of unnecessary debug commands. An attacker could exploit this vulnerability by gaining unrestricted access to the restricted shell and using the specific debug commands. A successful exploit could allow the attacker to enable the microphone of an affected device to record audio without notifying users.
A vulnerability in the web management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform an unauthorized system reset on an affected device. The vulnerability is due to improper authorization controls for a specific URL in the web management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could have a twofold impact: the attacker could either change the administrator password, gaining privileged access, or reset the network configuration details, causing a denial of service (DoS) condition. In both scenarios, manual intervention is required to restore normal operations.
A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device. The vulnerability is due to improper access controls for certain URLs on affected DCNM software. An attacker could exploit this vulnerability by connecting to the web-based management interface of an affected device and requesting specific URLs. A successful exploit could allow the attacker to download log files and diagnostic information from the affected device.
dot11t/t_if_dot11_hal_ath.c in Cisco IOS 12.3, 12.4, 15.0, and 15.1 allows remote attackers to cause a denial of service (assertion failure and reboot) via 802.11 wireless traffic, as demonstrated by a video call from Apple iOS 5.0 on an iPhone 4S, aka Bug ID CSCtt94391.
A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.
The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.
A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to bypass authorization and access sensitive information related to the device. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to sensitive information.
A vulnerability in Cisco Aironet Access Points (APs) Software could allow an unauthenticated, remote attacker to gain unauthorized access to a targeted device with elevated privileges. The vulnerability is due to insufficient access control for certain URLs on an affected device. An attacker could exploit this vulnerability by requesting specific URLs from an affected AP. An exploit could allow the attacker to gain access to the device with elevated privileges. While the attacker would not be granted access to all possible configuration options, it could allow the attacker to view sensitive information and replace some options with values of their choosing, including wireless network configuration. It would also allow the attacker to disable the AP, creating a denial of service (DoS) condition for clients associated with the AP.
A vulnerability in the filesystem of Cisco IOS XE Software could allow an authenticated, local attacker within the IOx Guest Shell to modify the namespace container protections on an affected device. The vulnerability is due to insufficient file permissions. An attacker could exploit this vulnerability by modifying files that they should not have access to. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container.
A vulnerability in the IOx application environment for Cisco IOS Software could allow an authenticated, remote attacker to gain unauthorized access to the Guest Operating System (Guest OS) running on an affected device. The vulnerability is due to incorrect role-based access control (RBAC) evaluation when a low-privileged user requests access to a Guest OS that should be restricted to administrative accounts. An attacker could exploit this vulnerability by authenticating to the Guest OS by using the low-privileged-user credentials. An exploit could allow the attacker to gain unauthorized access to the Guest OS as a root user.
A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.
Multiple clientless SSL VPN products that run in web browsers, including Stonesoft StoneGate; Cisco ASA; SonicWALL E-Class SSL VPN and SonicWALL SSL VPN; SafeNet SecureWire Access Gateway; Juniper Networks Secure Access; Nortel CallPilot; Citrix Access Gateway; and other products, when running in configurations that do not restrict access to the same domain as the VPN, retrieve the content of remote URLs from one domain and rewrite them so they originate from the VPN's domain, which violates the same origin policy and allows remote attackers to conduct cross-site scripting attacks, read cookies that originated from other domains, access the Web VPN session to gain access to internal resources, perform key logging, and conduct other attacks. NOTE: it could be argued that this is a fundamental design problem in any clientless VPN solution, as opposed to a commonly-introduced error that can be fixed in separate implementations. Therefore a single CVE has been assigned for all products that have this design
A vulnerability in the restricted security domain implementation of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to modify the behavior of default system policies, such as quality of service (QoS) policies, on an affected system. This vulnerability is due to improper access control when restricted security domains are used to implement multi-tenancy. An attacker with a valid user account associated with a restricted security domain could exploit this vulnerability. A successful exploit could allow the attacker to read, modify, or delete child policies created under default system policies, which are implicitly used by all tenants in the fabric, resulting in disruption of network traffic. Exploitation is not possible for policies under tenants that an attacker has no authorization to access.
A vulnerability in Cisco Webex Teams, formerly Cisco Spark, could allow an authenticated, remote attacker to view and modify data for an organization other than their own organization. The vulnerability exists because the affected software performs insufficient checks for associations between user accounts and organization accounts. An attacker who has administrator or compliance officer privileges for one organization account could exploit this vulnerability by using those privileges to view and modify data for another organization account. No customer data was impacted by this vulnerability.
A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.
A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.
A vulnerability in the configuration file protections of Cisco Virtualized Infrastructure Manager (VIM) could allow an authenticated, local attacker to access confidential information and elevate privileges on an affected device. This vulnerability is due to improper access permissions for certain configuration files. An attacker with low-privileged credentials could exploit this vulnerability by accessing an affected device and reading the affected configuration files. A successful exploit could allow the attacker to obtain internal database credentials, which the attacker could use to view and modify the contents of the database. The attacker could use this access to the database to elevate privileges on the affected device.
A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.
A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
A vulnerability in the Stealthwatch Management Console (SMC) of Cisco Stealthwatch Enterprise could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected system. The vulnerability is due to an insecure system configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. An exploit could allow the attacker to gain unauthenticated access, resulting in elevated privileges in the SMC.
A vulnerability in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to errors that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit this vulnerability by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to access resources that are behind the affected device and would typically be protected by the interface ACL.
A vulnerability in the authentication and authorization checking mechanisms of Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, adjacent attacker to gain network access to a Cisco TrustSec domain. Under normal circumstances, this access should be prohibited. The vulnerability is due to the dynamic assignment of Security Group Tags (SGTs) during a wireless roam from one Service Set Identifier (SSID) to another within the Cisco TrustSec domain. An attacker could exploit this vulnerability by attempting to acquire an SGT from other SSIDs within the domain. Successful exploitation could allow the attacker to gain privileged network access that should be prohibited under normal circumstances.
A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network.
A vulnerability in the Graphite web interface of the Policy and Charging Rules Function (PCRF) of Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access the Graphite web interface. The attacker would need to have access to the internal VLAN where CPS is deployed. The vulnerability is due to lack of authentication. An attacker could exploit this vulnerability by directly connecting to the Graphite web interface. An exploit could allow the attacker to access various statistics and Key Performance Indicators (KPIs) regarding the Cisco Policy Suite environment.
A vulnerability in the binding configuration of Cisco SD-WAN vManage Software containers could allow an unauthenticated, adjacent attacker who has access to the VPN0 logical network to also access the messaging service ports on an affected system. This vulnerability exists because the messaging server container ports on an affected system lack sufficient protection mechanisms. An attacker could exploit this vulnerability by connecting to the messaging service ports of the affected system. To exploit this vulnerability, the attacker must be able to send network traffic to interfaces within the VPN0 logical network. This network may be restricted to protect logical or physical adjacent networks, depending on device deployment configuration. A successful exploit could allow the attacker to view and inject messages into the messaging service, which can cause configuration changes or cause the system to reload.
Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.
A vulnerability in the client forwarding code of multiple Cisco Access Points (APs) could allow an unauthenticated, adjacent attacker to inject packets from the native VLAN to clients within nonnative VLANs on an affected device. This vulnerability is due to a logic error on the AP that forwards packets that are destined to a wireless client if they are received on the native VLAN. An attacker could exploit this vulnerability by obtaining access to the native VLAN and directing traffic directly to the client through their MAC/IP combination. A successful exploit could allow the attacker to bypass VLAN separation and potentially also bypass any Layer 3 protection mechanisms that are deployed.
A vulnerability in the Disaster Recovery framework of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), and Cisco Unity Connection could allow an authenticated, remote attacker to perform certain administrative actions they should not be able to. This vulnerability is due to insufficient access control checks on the affected device. An attacker with read-only privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to perform a set of administrative actions they should not be able to.
Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.
A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to elevate privileges and execute arbitrary code on the underlying operating system as the root user. An attacker must be authenticated on an affected device as a PRIV15 user. This vulnerability is due to insufficient file system protection and the presence of a sensitive file in the bootflash directory on an affected device. An attacker could exploit this vulnerability by overwriting an installer file stored in the bootflash directory with arbitrary commands that can be executed with root-level privileges. A successful exploit could allow the attacker to read and write changes to the configuration database on the affected device.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet.
A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.
A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.
A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.
A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.
A vulnerability in an access control mechanism of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access services beyond the scope of their authorization. This vulnerability is due to insufficient enforcement of access control in the affected software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow the attacker to overwrite policies and impact the configuration and operation of the affected device.
Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an unauthenticated, remote attacker to read or write arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker could exploit this vulnerability by using a specific API endpoint to upload a file to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on an affected device.
A vulnerability in the anti-spam protection mechanisms of Cisco AsyncOS Software for the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass certain content filters on an affected device. The vulnerability is due to incomplete input and validation checking mechanisms for certain Sender Policy Framework (SPF) messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. If successful, an exploit could allow the attacker to bypass the URL filters that are configured for the affected device, which could allow malicious URLs to pass through the device.
A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.
A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.
Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.