In the Linux kernel, the following vulnerability has been resolved: atm: Fix NULL pointer dereference When MPOA_cache_impos_rcvd() receives the msg, it can trigger Null Pointer Dereference Vulnerability if both entry and holding_time are NULL. Because there is only for the situation where entry is NULL and holding_time exists, it can be passed when both entry and holding_time are NULL. If these are NULL, the entry will be passd to eg_cache_put() as parameter and it is referenced by entry->use code in it. kasan log: [ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I [ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102 [ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470 [ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80 [ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006 [ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e [ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030 [ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88 [ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15 [ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068 [ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000 [ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0 [ 3.326430] Call Trace: [ 3.326725] <TASK> [ 3.326927] ? die_addr+0x3c/0xa0 [ 3.327330] ? exc_general_protection+0x161/0x2a0 [ 3.327662] ? asm_exc_general_protection+0x26/0x30 [ 3.328214] ? vprintk_emit+0x15e/0x420 [ 3.328543] ? eg_cache_remove_entry+0xa5/0x470 [ 3.328910] ? eg_cache_remove_entry+0x9a/0x470 [ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10 [ 3.329664] ? console_unlock+0x107/0x1d0 [ 3.329946] ? __pfx_console_unlock+0x10/0x10 [ 3.330283] ? do_syscall_64+0xa6/0x1a0 [ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f [ 3.331090] ? __pfx_prb_read_valid+0x10/0x10 [ 3.331395] ? down_trylock+0x52/0x80 [ 3.331703] ? vprintk_emit+0x15e/0x420 [ 3.331986] ? __pfx_vprintk_emit+0x10/0x10 [ 3.332279] ? down_trylock+0x52/0x80 [ 3.332527] ? _printk+0xbf/0x100 [ 3.332762] ? __pfx__printk+0x10/0x10 [ 3.333007] ? _raw_write_lock_irq+0x81/0xe0 [ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10 [ 3.333614] msg_from_mpoad+0x1185/0x2750 [ 3.333893] ? __build_skb_around+0x27b/0x3a0 [ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10 [ 3.334501] ? __alloc_skb+0x1c0/0x310 [ 3.334809] ? __pfx___alloc_skb+0x10/0x10 [ 3.335283] ? _raw_spin_lock+0xe0/0xe0 [ 3.335632] ? finish_wait+0x8d/0x1e0 [ 3.335975] vcc_sendmsg+0x684/0xba0 [ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10 [ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10 [ 3.337056] ? fdget+0x176/0x3e0 [ 3.337348] __sys_sendto+0x4a2/0x510 [ 3.337663] ? __pfx___sys_sendto+0x10/0x10 [ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400 [ 3.338364] ? sock_ioctl+0x1bb/0x5a0 [ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20 [ 3.339017] ? __pfx_sock_ioctl+0x10/0x10 [ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10 [ 3.339727] ? selinux_file_ioctl+0xa4/0x260 [ 3.340166] __x64_sys_sendto+0xe0/0x1c0 [ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140 [ 3.340898] do_syscall_64+0xa6/0x1a0 [ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 3.341533] RIP: 0033:0x44a380 [ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix NULL pointer dereference on mkdir When a 9p tree was mounted with option 'posixacl', parent directory had a default ACL set for its subdirectories, e.g.: setfacl -m default:group:simpsons:rwx parentdir then creating a subdirectory crashed 9p client, as v9fs_fid_add() call in function v9fs_vfs_mkdir_dotl() sets the passed 'fid' pointer to NULL (since dafbe689736) even though the subsequent v9fs_set_create_acl() call expects a valid non-NULL 'fid' pointer: [ 37.273191] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 37.322338] Call Trace: [ 37.323043] <TASK> [ 37.323621] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 37.324448] ? page_fault_oops (arch/x86/mm/fault.c:714) [ 37.325532] ? search_module_extables (kernel/module/main.c:3733) [ 37.326742] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.328006] ? search_bpf_extables (kernel/bpf/core.c:804) [ 37.329142] ? exc_page_fault (./arch/x86/include/asm/paravirt.h:686 arch/x86/mm/fault.c:1488 arch/x86/mm/fault.c:1538) [ 37.330196] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:574) [ 37.331330] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.332562] ? v9fs_fid_xattr_get (fs/9p/xattr.c:30) 9p [ 37.333824] v9fs_fid_xattr_set (fs/9p/fid.h:23 fs/9p/xattr.c:121) 9p [ 37.335077] v9fs_set_acl (fs/9p/acl.c:276) 9p [ 37.336112] v9fs_set_create_acl (fs/9p/acl.c:307) 9p [ 37.337326] v9fs_vfs_mkdir_dotl (fs/9p/vfs_inode_dotl.c:411) 9p [ 37.338590] vfs_mkdir (fs/namei.c:4313) [ 37.339535] do_mkdirat (fs/namei.c:4336) [ 37.340465] __x64_sys_mkdir (fs/namei.c:4354) [ 37.341455] do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) [ 37.342447] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by simply swapping the sequence of these two calls in v9fs_vfs_mkdir_dotl(), i.e. calling v9fs_set_create_acl() before v9fs_fid_add().

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix possible NULL pointer dereference of resource The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2

In the Linux kernel, the following vulnerability has been resolved: can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to bail out if skb cannot be allocated.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add sanity checks on rdev validity There is a possibility that ulp_irq_stop and ulp_irq_start callbacks will be called when the device is in detached state. This can cause a crash due to NULL pointer dereference as the rdev is already freed.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ...

In the Linux kernel, the following vulnerability has been resolved: USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Commit de144ff4234f changes _pnfs_return_layout() to call pnfs_mark_matching_lsegs_return() passing NULL as the struct pnfs_layout_range argument. Unfortunately, pnfs_mark_matching_lsegs_return() doesn't check if we have a value here before dereferencing it, causing an oops. I'm able to hit this crash consistently when running connectathon basic tests on NFS v4.1/v4.2 against Ontap.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid extent tree [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport.

In the Linux kernel, the following vulnerability has been resolved: netfs: Call `invalidate_cache` only if implemented Many filesystems such as NFS and Ceph do not implement the `invalidate_cache` method. On those filesystems, if writing to the cache (`NETFS_WRITE_TO_CACHE`) fails for some reason, the kernel crashes like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP PTI CPU: 9 UID: 0 PID: 3380 Comm: kworker/u193:11 Not tainted 6.13.3-cm4all1-hp #437 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_write_collection_worker RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffff9b86e2ca7dc0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 7fffffffffffffff RDX: 0000000000000001 RSI: ffff89259d576a18 RDI: ffff89259d576900 RBP: ffff89259d5769b0 R08: ffff9b86e2ca7d28 R09: 0000000000000002 R10: ffff89258ceaca80 R11: 0000000000000001 R12: 0000000000000020 R13: ffff893d158b9338 R14: ffff89259d576900 R15: ffff89259d5769b0 FS: 0000000000000000(0000) GS:ffff893c9fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000054442e003 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x15c/0x460 ? try_to_wake_up+0x2d2/0x530 ? exc_page_fault+0x5e/0x100 ? asm_exc_page_fault+0x22/0x30 netfs_write_collection_worker+0xe9f/0x12b0 ? xs_poll_check_readable+0x3f/0x80 ? xs_stream_data_receive_workfn+0x8d/0x110 process_one_work+0x134/0x2d0 worker_thread+0x299/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xba/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000000 This patch adds the missing `NULL` check.

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com>

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix dereference of null pointer flow In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then nft_flow_rule_create is not called and flow is NULL. The subsequent error handling execution via label err_destroy_flow_rule will lead to a null pointer dereference on flow when calling nft_flow_rule_destroy. Since the error path to err_destroy_flow_rule has to cater for null and non-null flows, only call nft_flow_rule_destroy if flow is non-null to fix this issue. Addresses-Coverity: ("Explicity null dereference")

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect).

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f.

In the Linux kernel, the following vulnerability has been resolved: ARM: davinci: da850-evm: Avoid NULL pointer dereference With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0 The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall(). Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add pointer checks in qedf_update_link_speed() The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data.

A flaw was found in the Linux kernel. A null pointer dereference in bond_ipsec_add_sa() may lead to local denial of service.

A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.

In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix TZ_GET_TRIP NULL pointer dereference Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one.

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix NULL pointer in flush_workqueue Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove() Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove(): [ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12 [ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry [ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004 [...] [ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0 [...] [ 57.331328] Call Trace: [ 57.331477] <TASK> [...] [ 57.333511] ? do_user_addr_fault+0x3e5/0x740 [ 57.333778] ? exc_page_fault+0x70/0x170 [ 57.334016] ? asm_exc_page_fault+0x2b/0x30 [ 57.334263] ? __pfx_ocfs2_xa_block_wipe_namevalue+0x10/0x10 [ 57.334596] ? ocfs2_xa_block_wipe_namevalue+0x2a/0xc0 [ 57.334913] ocfs2_xa_remove_entry+0x23/0xc0 [ 57.335164] ocfs2_xa_set+0x704/0xcf0 [ 57.335381] ? _raw_spin_unlock+0x1a/0x40 [ 57.335620] ? ocfs2_inode_cache_unlock+0x16/0x20 [ 57.335915] ? trace_preempt_on+0x1e/0x70 [ 57.336153] ? start_this_handle+0x16c/0x500 [ 57.336410] ? preempt_count_sub+0x50/0x80 [ 57.336656] ? _raw_read_unlock+0x20/0x40 [ 57.336906] ? start_this_handle+0x16c/0x500 [ 57.337162] ocfs2_xattr_block_set+0xa6/0x1e0 [ 57.337424] __ocfs2_xattr_set_handle+0x1fd/0x5d0 [ 57.337706] ? ocfs2_start_trans+0x13d/0x290 [ 57.337971] ocfs2_xattr_set+0xb13/0xfb0 [ 57.338207] ? dput+0x46/0x1c0 [ 57.338393] ocfs2_xattr_trusted_set+0x28/0x30 [ 57.338665] ? ocfs2_xattr_trusted_set+0x28/0x30 [ 57.338948] __vfs_removexattr+0x92/0xc0 [ 57.339182] __vfs_removexattr_locked+0xd5/0x190 [ 57.339456] ? preempt_count_sub+0x50/0x80 [ 57.339705] vfs_removexattr+0x5f/0x100 [...] Reproducer uses faultinject facility to fail ocfs2_xa_remove() -> ocfs2_xa_value_truncate() with -ENOMEM. In this case the comment mentions that we can return 0 if ocfs2_xa_cleanup_value_truncate() is going to wipe the entry anyway. But the following 'rc' check is wrong and execution flow do 'ocfs2_xa_remove_entry(loc);' twice: * 1st: in ocfs2_xa_cleanup_value_truncate(); * 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'. Fix this by skipping the 2nd removal of the same entry and making syzkaller repro happy.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix resume from sleep before interface was brought up Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. [mkl: fix error handling in mcp251x_stop()]

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check")

An issue was discovered in the Linux kernel brcm_nvram_parse in drivers/nvmem/brcm_nvram.c. Lacks for the check of the return value of kzalloc() can cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: net/sched: accept TCA_STAB only for root qdisc Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix potential null dereference on pointer status There are calls to idxd_cmd_exec that pass a null status pointer however a recent commit has added an assignment to *status that can end up with a null pointer dereference. The function expects a null status pointer sometimes as there is a later assignment to *status where status is first null checked. Fix the issue by null checking status before making the assignment. Addresses-Coverity: ("Explicit null dereferenced")

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix system hang while resume with TBT monitor [Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. (cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85)

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Make sure GHCB is mapped before updating Access to the GHCB is mainly in the VMGEXIT path and it is known that the GHCB will be mapped. But there are two paths where it is possible the GHCB might not be mapped. The sev_vcpu_deliver_sipi_vector() routine will update the GHCB to inform the caller of the AP Reset Hold NAE event that a SIPI has been delivered. However, if a SIPI is performed without a corresponding AP Reset Hold, then the GHCB might not be mapped (depending on the previous VMEXIT), which will result in a NULL pointer dereference. The svm_complete_emulated_msr() routine will update the GHCB to inform the caller of a RDMSR/WRMSR operation about any errors. While it is likely that the GHCB will be mapped in this situation, add a safe guard in this path to be certain a NULL pointer dereference is not encountered.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id() mwifiex_get_priv_by_id() returns the priv pointer corresponding to the bss_num and bss_type, but without checking if the priv is actually currently in use. Unused priv pointers do not have a wiphy attached to them which can lead to NULL pointer dereferences further down the callstack. Fix this by returning only used priv pointers which have priv->bss_mode set to something else than NL80211_IFTYPE_UNSPECIFIED. Said NULL pointer dereference happened when an Accesspoint was started with wpa_supplicant -i mlan0 with this config: network={ ssid="somessid" mode=2 frequency=2412 key_mgmt=WPA-PSK WPA-PSK-SHA256 proto=RSN group=CCMP pairwise=CCMP psk="12345678" } When waiting for the AP to be established, interrupting wpa_supplicant with <ctrl-c> and starting it again this happens: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000 | [0000000000000140] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio +mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs +imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6 | CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18 | Hardware name: somemachine (DT) | Workqueue: events sdio_irq_work | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex] | lr : mwifiex_get_cfp+0x34/0x15c [mwifiex] | sp : ffff8000818b3a70 | x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004 | x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9 | x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000 | x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000 | x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517 | x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1 | x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157 | x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124 | x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000 | Call trace: | mwifiex_get_cfp+0xd8/0x15c [mwifiex] | mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex] | mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex] | mwifiex_process_sta_event+0x298/0xf0c [mwifiex] | mwifiex_process_event+0x110/0x238 [mwifiex] | mwifiex_main_process+0x428/0xa44 [mwifiex] | mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio] | process_sdio_pending_irqs+0x64/0x1b8 | sdio_irq_work+0x4c/0x7c | process_one_work+0x148/0x2a0 | worker_thread+0x2fc/0x40c | kthread+0x110/0x114 | ret_from_fork+0x10/0x20 | Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000) | ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: reset mmio mappings with devm Set our various mmio mappings to NULL. This should make it easier to catch something rogue trying to mess with mmio after device removal. For example, we might unmap everything and then start hitting some mmio address which has already been unmamped by us and then remapped by something else, causing all kinds of carnage.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check")

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this my masking the ring interrupts before ring stop request.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations.

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly.