An authenticated attacker can send a specially crafted route to the “edit_route.cgi” binary and have it execute shell commands. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.303 for the LP series and 1.297 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.

An authenticated attacker can upload a file with a filename including “..” and “/” to achieve the ability to upload the desired file anywhere on the filesystem. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.271. This allows a malicious actor to overwrite sensitive system files and install a startup service to gain remote access to the underlaying Linux operating system with root privileges.

LenelS2 NetBox access control and event monitoring system was discovered to contain an unauthenticated RCE in versions prior to and including 5.6.1, which allows an attacker to execute malicious commands with elevated permissions.

Matrikon, a subsidary of Honeywell Matrikon OPC Server (all versions) is vulnerable to a condition where a low privileged user allowed to connect to the OPC server to use the functions of the IPersisFile to execute operating system processes with system-level privileges.

Honeywell Alerton Visual Logic through 2022-05-04 allows unauthenticated programming writes from remote users. This enables code to be stored on the controller and then run without verification. A user with malicious intent can send a crafted packet to change and/or stop the program without the knowledge of other users, altering the controller's function. After the programming change, the program needs to be overwritten in order for the controller to restore its original operational function.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Honeywell MB-Secure allows Privilege Abuse. This issue affects MB-Secure: from V11.04 before V12.53 and MB-Secure PRO from V01.06 before V03.09.Honeywell also recommends updating to the most recent version of this product.

A vulnerability in the web UI of Cisco Modeling Labs could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the web application on the underlying operating system of an affected Cisco Modeling Labs server. This vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected server. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the web application, virl2, on the underlying operating system of the affected server. To exploit this vulnerability, the attacker must have valid user credentials on the web UI.

The package ungit before 1.5.20 are vulnerable to Remote Code Execution (RCE) via argument injection. The issue occurs when calling the /api/fetch endpoint. User controlled values (remote and ref) are passed to the git fetch command. By injecting some git options it was possible to get arbitrary command execution.

The package weblate from 0 and before 4.11.1 are vulnerable to Remote Code Execution (RCE) via argument injection when using git or mercurial repositories. Authenticated users, can change the behavior of the application in an unintended way, leading to command execution.

CRITICAL: An improper neutralization of argument delimiters in a command vulnerability was identified in GitHub Enterprise Server that enabled remote code execution. To exploit this vulnerability, an attacker would need permission to create and build GitHub Pages using GitHub Actions. This vulnerability affected only version 3.7.0 of GitHub Enterprise Server and was fixed in version 3.7.1. This vulnerability was reported via the GitHub Bug Bounty program.

A flaw was found in Ansible Automation Platform’s EDA component where user-supplied Git URLs are passed unsanitized to the git ls-remote command. This vulnerability allows an authenticated attacker to inject arguments and execute arbitrary commands on the EDA worker. In Kubernetes/OpenShift environments, this can lead to service account token theft and cluster access.

CoreDial sipXcom up to and including 21.04 is vulnerable to Improper Neutralization of Argument Delimiters in a Command. XMPP users are able to inject arbitrary arguments into a system command, which can be used to read files from, and write files to, the sipXcom server. This can also be leveraged to gain remote command execution.

A vulnerability in the configuration and management database of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. The vulnerability is due to insufficient validation of command arguments that are passed to the configuration and management database of the affected software. An attacker could exploit this vulnerability by creating custom functions that contain malicious code and are executed as the vmanage user of the configuration management system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69937.

GoCD is a continuous delivery server. In GoCD versions prior to 22.1.0, it is possible for existing authenticated users who have permissions to edit or create pipeline materials or pipeline configuration repositories to get remote code execution capability on the GoCD server via configuring a malicious branch name which abuses Mercurial hooks/aliases to exploit a command injection weakness. An attacker would require access to an account with existing GoCD administration permissions to either create/edit (`hg`-based) configuration repositories; create/edit pipelines and their (`hg`-based) materials; or, where "pipelines-as-code" configuration repositories are used, to commit malicious configuration to such an external repository which will be automatically parsed into a pipeline configuration and (`hg`) material definition by the GoCD server. This issue is fixed in GoCD 22.1.0. As a workaround, users who do not use/rely upon Mercurial materials can uninstall/remove the `hg`/Mercurial binary from the underlying GoCD Server operating system or Docker image.

Remote Code Execution can occur via the external news feed in ILIAS 6.4 because of incorrect parameter sanitization for Magpie RSS data.

In JetBrains TeamCity before 2022.04.2 build parameter injection was possible

Multiple API endpoints in Atlassian Bitbucket Server and Data Center 7.0.0 before version 7.6.17, from version 7.7.0 before version 7.17.10, from version 7.18.0 before version 7.21.4, from version 8.0.0 before version 8.0.3, from version 8.1.0 before version 8.1.3, and from version 8.2.0 before version 8.2.2, and from version 8.3.0 before 8.3.1 allows remote attackers with read permissions to a public or private Bitbucket repository to execute arbitrary code by sending a malicious HTTP request. This vulnerability was reported via our Bug Bounty Program by TheGrandPew.

Discord Recon Server is a bot that allows one to do one's reconnaissance process from one's Discord. A vulnerability in Discord Recon Server prior to 0.0.3 could be exploited to read internal files from the system and write files into the system resulting in remote code execution. This issue has been fixed in version 0.0.3. As a workaround, one may copy the code from `assets/CommandInjection.py` in the Discord Recon Server code repository and overwrite vulnerable code from one's own Discord Recon Server implementation with code that contains the patch.

Jellyfin is a Free Software Media System for managing and streaming media. In affected versions there is an argument injection in the VideosController, specifically the `/Videos/<itemId>/stream` and `/Videos/<itemId>/stream.<container>` endpoints which are present in the current Jellyfin version. Additional endpoints in the AudioController might also be vulnerable, as they differ only slightly in execution. Those endpoints are reachable by an unauthenticated user. In order to exploit this vulnerability an unauthenticated attacker has to guess an itemId, which is a completely random GUID. It’s a very unlikely case even for a large media database with lots of items. Without an additional information leak, this vulnerability shouldn’t be directly exploitable, even if the instance is reachable from the Internet. There are a lot of query parameters that get accepted by the method. At least two of those, videoCodec and audioCodec are vulnerable to the argument injection. The values can be traced through a lot of code and might be changed in the process. However, the fallback is to always use them as-is, which means we can inject our own arguments. Those arguments land in the command line of FFmpeg. Because UseShellExecute is always set to false, we can’t simply terminate the FFmpeg command and execute our own. It should only be possible to add additional arguments to FFmpeg, which is powerful enough as it stands. There is probably a way of overwriting an arbitrary file with malicious content. This vulnerability has been addressed in version 10.8.13. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to argumention injection to the curl binary via crafted HTTP requests to return.cgi. A remote, authenticated attacker can use this vulnerability to upload files to the device and ultimately execute code as root.

A improper neutralization of argument delimiters in a command ('argument injection') in Fortinet FortiNAC versions 9.4.0, 9.2.0 through 9.2.5, 9.1.0 through 9.1.7, 8.8.0 through 8.8.11, 8.7.0 through 8.7.6, 8.6.0 through 8.6.5, 8.5.0 through 8.5.4, 8.3.7 allows attacker to execute unauthorized code or commands via specially crafted input parameters.

Jellyfin is an open source self hosted media server. Versions before 10.10.7 are vulnerable to argument injection in FFmpeg. This can be leveraged to possibly achieve remote code execution by anyone with credentials to a low-privileged user. This vulnerability was previously reported in CVE-2023-49096 and patched in version 10.8.13, but the patch can be bypassed. The original fix sanitizes some parameters to make injection impossible, but certain unsanitized parameters can still be used for argument injection. The same unauthenticated endpoints are vulnerable: /Videos/<itemId>/stream and /Videos/<itemId>/stream.<container>, likely alongside similar endpoints in AudioController. This argument injection can be exploited to achieve arbitrary file write, leading to possible remote code execution through the plugin system. While the unauthenticated endpoints are vulnerable, a valid itemId is required for exploitation and any authenticated attacker could easily retrieve a valid itemId to make the exploit work. This vulnerability is patched in version 10.10.7.

Argument injection in special agent configuration in Checkmk <2.4.0p1, <2.3.0p32, <2.2.0p42 and 2.1.0 allows authenticated attackers to write arbitrary files

An argument injection vulnerability exists in the affected product that could allow an attacker to execute arbitrary code within the context of the host machine.

An issue was discovered in Echo ShareCare 8.15.5. The UnzipFile feature in Access/EligFeedParse_Sup/UnzipFile_Upd.cfm is susceptible to a command argument injection vulnerability when processing remote input in the zippass parameter from an authenticated user, leading to the ability to inject arbitrary arguments to 7z.exe.

Composer is a dependency manager for PHP. URLs for Mercurial repositories in the root composer.json and package source download URLs are not sanitized correctly. Specifically crafted URL values allow code to be executed in the HgDriver if hg/Mercurial is installed on the system. The impact to Composer users directly is limited as the composer.json file is typically under their own control and source download URLs can only be supplied by third party Composer repositories they explicitly trust to download and execute source code from, e.g. Composer plugins. The main impact is to services passing user input to Composer, including Packagist.org and Private Packagist. This allowed users to trigger remote code execution. The vulnerability has been patched on Packagist.org and Private Packagist within 12h of receiving the initial vulnerability report and based on a review of logs, to the best of our knowledge, was not abused by anyone. Other services/tools using VcsRepository/VcsDriver or derivatives may also be vulnerable and should upgrade their composer/composer dependency immediately. Versions 1.10.22 and 2.0.13 include patches for this issue.