The rocker_io_writel function in hw/net/rocker/rocker.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (out-of-bounds read and QEMU process crash) by leveraging failure to limit DMA buffer size.

Buffer overflow in NetRxPkt::ehdr_buf in hw/net/net_rx_pkt.c in QEMU (aka Quick Emulator), when the VLANSTRIP feature is enabled on the vmxnet3 device, allows remote attackers to cause a denial of service (out-of-bounds access and QEMU process crash) via vectors related to VLAN stripping.

An integer overflow and buffer overflow issues were found in the ACPI Error Record Serialization Table (ERST) device of QEMU in the read_erst_record() and write_erst_record() functions. Both issues may allow the guest to overrun the host buffer allocated for the ERST memory device. A malicious guest could use these flaws to crash the QEMU process on the host.

An integer underflow issue was found in the QEMU VNC server while processing ClientCutText messages in the extended format. A malicious client could use this flaw to make QEMU unresponsive by sending a specially crafted payload message, resulting in a denial of service.

hw/display/bochs-display.c in QEMU 4.0.0 does not ensure a sufficient PCI config space allocation, leading to a buffer overflow involving the PCIe extended config space.

Buffer overflow in the stellaris_enet_receive function in hw/net/stellaris_enet.c in QEMU, when the Stellaris ethernet controller is configured to accept large packets, allows remote attackers to cause a denial of service (QEMU crash) via a large packet.

Buffer overflow in the pcnet_receive function in hw/net/pcnet.c in QEMU, when a guest NIC has a larger MTU, allows remote attackers to cause a denial of service (guest OS crash) or execute arbitrary code via a large packet.

Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0 allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message.

Buffer overflow in the SCSI implementation in QEMU, as used in Xen, when a SCSI controller has more than 256 attached devices, allows local users to gain privileges via a small transfer buffer in a REPORT LUNS command.

Buffer overflow in the e1000_receive function in the e1000 device driver (hw/e1000.c) in QEMU 1.3.0-rc2 and other versions, when the SBP and LPE flags are disabled, allows remote attackers to cause a denial of service (guest OS crash) and possibly execute arbitrary guest code via a large packet.

The virtqueue_map_desc function in hw/virtio/virtio.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via a large I/O descriptor buffer length value.

The net_tx_pkt_do_sw_fragmentation function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a zero length for the current fragment length.

The virtqueue_map_desc function in hw/virtio/virtio.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a zero length for the descriptor buffer.

Buffer overflow in the mipsnet_receive function in hw/net/mipsnet.c in QEMU, when the guest NIC is configured to accept large packets, allows remote attackers to cause a denial of service (memory corruption and QEMU crash) or possibly execute arbitrary code via a packet larger than 1514 bytes.

An out-of-bounds memory access issue was found in Quick Emulator (QEMU) before 1.7.2 in the VNC display driver. This flaw could occur while refreshing the VNC display surface area in the 'vnc_refresh_server_surface'. A user inside a guest could use this flaw to crash the QEMU process.

A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc() function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.

A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU process.

A vulnerability has been found in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. This vulnerability affects unknown code of the file /boafrm/formFirewallAdv. Such manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. The impacted element is an unknown function of the file /boafrm/formWlEncrypt. The manipulation of the argument submit-url results in buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited.

A vulnerability was determined in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. Impacted is an unknown function of the file /boafrm/formVpnConfigSetup. Executing manipulation of the argument submit-url can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Tenda AC20 up to 16.03.08.12. The impacted element is an unknown function of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A weakness has been identified in D-Link DWR-M920, DWR-M921, DWR-M960, DIR-822K and DIR-825M 1.01.07. This issue affects some unknown processing of the file /boafrm/formTracerouteDiagnosticRun. Executing manipulation of the argument host can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited.

A vulnerability was found in D-Link DIR-822K 1.00. This issue affects the function sub_455524 of the file /boafrm/formNtp. Performing manipulation of the argument submit-url results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A vulnerability was identified in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. The affected element is an unknown function of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in D-Link DWR-M920, DWR-M921, DWR-M960, DWR-M961 and DIR-825M 1.01.07/1.1.47. This vulnerability affects unknown code of the file /boafrm/formPingDiagnosticRun. Performing manipulation of the argument host results in buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be exploited.

A weakness has been identified in H3C Magic B0 up to 100R002. This impacts the function EditWlanMacList of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Tenda CH22 1.0.0.1. This impacts the function fromPptpUserSetting of the file /goform/PPTPUserSetting. The manipulation of the argument delno leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in D-Link DWR-M920 1.1.50. This affects the function sub_41C7FC of the file /boafrm/formPinManageSetup. This manipulation of the argument submit-url causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

A vulnerability was detected in Tenda CH22 1.0.0.1. Affected is the function formWrlExtraGet of the file /goform/WrlExtraGet. Performing manipulation of the argument chkHz results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in H3C Magic B1 up to 100R004. The affected element is the function sub_44de0 of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda A15 15.13.07.13. Affected is the function fromSetWirelessRepeat of the file /goform/openNetworkGateway. The manipulation of the argument wpapsk_crypto2_4g results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.

A security vulnerability has been detected in Tenda AC23 16.03.07.52. Affected is the function saveParentControlInfo of the file /goform/saveParentControlInfo. Such manipulation of the argument Time leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

The extract_name function in Fluent Bit in_docker input plugin copies container names into a fixed size stack buffer without validating length. An attacker who can create containers or control container names, can supply a long name that overflows the buffer, leading to process crash or arbitrary code execution.

A vulnerability was identified in Tenda AC21 16.03.08.16. This vulnerability affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg. The manipulation of the argument startIp leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A weakness has been identified in Tenda CH22 1.0.0.1. Affected is the function fromwebExcptypemanFilter of the file /goform/webExcptypemanFilter. Executing manipulation of the argument page can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited.

A weakness has been identified in Tenda CH22 1.0.0.1. Affected by this issue is the function fromVirtualSer of the file /goform/VirtualSer. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited.

A vulnerability has been found in Tenda CH22 1.0.0.1. This affects the function fromSafeMacFilter of the file /goform/SafeMacFilter. The manipulation of the argument page leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function fromSafeClientFilter of the file /goform/SafeClientFilter. Performing manipulation of the argument page results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A weakness has been identified in TOTOLINK A3300R 17.0.0cu.557_B20221024. The impacted element is the function setDdnsCfg of the file /cgi-bin/cstecgi.cgi. Executing manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be exploited.

A security vulnerability has been detected in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function fromP2pListFilter of the file /goform/P2pListFilter. The manipulation of the argument page leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A vulnerability was determined in Tenda CH22 1.0.0.1. This issue affects the function fromDhcpListClient of the file /goform/DhcpListClient. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A security vulnerability has been detected in TOTOLINK A3300R 17.0.0cu.557_B20221024. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

Buffer Overflow vulnerability in FFMpeg 4.2.3 in dnn_execute_layer_pad in libavfilter/dnn/dnn_backend_native_layer_pad.c due to a call to memcpy without length checks, which could let a remote malicious user execute arbitrary code.

A flaw has been found in Tenda CH22 1.0.0.1. Affected by this issue is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter. Executing manipulation of the argument page can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted commands sent through the PubNub service can cause a stack-based buffer overflow overwriting arbitrary data. An attacker should send an authenticated HTTP request to trigger this vulnerability. At 0x9d01ef24 the value for the s_offset key is copied using strcpy to the buffer at $sp+0x2b0. This buffer is 32 bytes large, sending anything longer will cause a buffer overflow.

A vulnerability was determined in Tenda AC10 16.03.10.13. Affected by this vulnerability is the function formSysRunCmd of the file /goform/SysRunCmd. This manipulation of the argument getui causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Tenda CH22 1.0.0.1. This impacts the function fromAddressNat of the file /goform/addressNat. Performing manipulation of the argument page results in buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be exploited.