A vulnerability was found in otale Tale Blog 2.0.5. It has been classified as problematic. This affects an unknown part of the file /%61dmin/api/logs. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.

GLPI is a free asset and IT management software package. Starting in version 9.5.0 and prior to version 10.0.8, an incorrect rights check on a file allows an unauthenticated user to be able to access dashboards data. Version 10.0.8 contains a patch for this issue.

An improper authentication vulnerability in the authentication module of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to obtain system information by sending a crafted URL to a vulnerable device.

A flaw in Give before 2.5.5, a WordPress plugin, allowed unauthenticated users to bypass API authentication methods and access personally identifiable user information (PII) including names, addresses, IP addresses, and email addresses. Once an API key has been set to any meta key value from the wp_usermeta table, and the token is set to the corresponding MD5 hash of the meta key selected, one can make a request to the restricted endpoints, and thus access sensitive donor data.

Authentication Bypass Vulnerability in Micro Focus Access Manager Product, affects all version prior to version 4.5.3.3. The vulnerability could cause information leakage.

An authentication bypass vulnerability exists in the get_aes_key_info_by_packetid() function of the home_security binary of Anker Eufy Homebase 2 2.1.6.9h. Generic network sniffing can lead to password recovery. An attacker can sniff network traffic to trigger this vulnerability.

In github.com/kongchuanhujiao/server before version 1.3.21 there is an authentication Bypass by Primary Weakness vulnerability. All users are impacted. This is fixed in version 1.3.21.

Gryphon Tower routers contain an unprotected openvpn configuration file which can grant attackers access to the Gryphon homebound VPN network which exposes the LAN interfaces of other users' devices connected to the same service. An attacker could leverage this to make configuration changes to, or otherwise attack victims' devices as though they were on an adjacent network.

The web interfaces of Buffalo WSR-2533DHPL2 firmware version <= 1.02 and WSR-2533DHP3 firmware version <= 1.24 do not properly restrict access to sensitive information from an unauthorized actor.

An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.

A Security Bypass vulnerability exists in Zavio IP Cameras through 1.6.3 because the RTSP protocol authentication is disabled by default, which could let a malicious user obtain unauthorized access to the live video stream.

MegaRAC Default Credentials Vulnerability

XWiki OIDC has various tools to manipulate OpenID Connect protocol in XWiki. Prior to version 1.29.1, even if a wiki has an OpenID provider configured through its xwiki.properties, it is possible to provide a third party provider its details through request parameters. One can then bypass the XWiki authentication altogether by specifying its own provider through the oidc.endpoint.* request parameters (or by using an XWiki-based OpenID provider with oidc.xwikiprovider. With the same approach, one could also provide a specific group mapping through oidc.groups.mapping that would make his user automatically part of the XWikiAdminGroup. This issue has been patched, please upgrade to 1.29.1. There is no workaround, an upgrade of the authenticator is required.

Broken access controls on PDFtron data in M-Files Hubshare before 3.3.11.3 allows unauthenticated attackers to access restricted PDF files via a known URL.

A vulnerability classified as critical was found in Click Studios Passwordstate and Passwordstate Browser Extension Chrome. This vulnerability affects unknown code of the component API. The manipulation leads to authentication bypass by assumed-immutable data. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-216244.

D-Link GO-RT-AC750 GORTAC750_revA_v101b03 & GO-RT-AC750_revB_FWv200b02 is vulnerable to Static Default Credentials via /etc/init0.d/S80telnetd.sh.

XWiki Platform Old Core is a core package for XWiki Platform, a generic wiki platform. Prior to versions 14.2 and 13.10.4, all rights checks that would normally prevent a user from viewing a document on a wiki can be bypassed using the login action and directly specified templates. This exposes title, content and comments of any document and properties of objects, though class and property name must be known. This is also exploitable on private wikis. This has been patched in versions 14.2 and 13.10.4 by properly checking view rights before loading documents and disallowing non-default templates in the login, registration and skin action. As a workaround, it would be possible to protect all templates individually by adding code to check access rights first.

The PixelYourSite – Your smart PIXEL (TAG) & API Manager and the PixelYourSite PRO plugins for WordPress are vulnerable to Sensitive Information Exposure in all versions up to, and including, 9.7.1 and 10.4.2, respectively, through publicly exposed log files. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed log files, and to delete log files.

In WhatsUp Gold versions released before 2024.0.0,  an Authentication Bypass issue exists which allows an attacker to obtain encrypted user credentials.

This vulnerability allows unauthenticated remote attackers to bypass authentication and gain APIs access of the Manager.

Contract Management System v2.0 contains a weak default password which gives attackers to access database connection information.

An issue was discovered in the A4N (Aremis 4 Nomad) application 1.5.0 for Android. It possesses an authentication mechanism; however, some features do not require any token or cookie in a request. Therefore, an attacker may send a simple HTTP request to the right endpoint, and obtain authorization to retrieve application data.

macrozheng mall-tiny 1.0.1 suffers from Insecure Permissions. The application's JWT signing keys are hardcoded and do not change. User information is explicitly written into the JWT and used for subsequent privilege management, making it is possible to forge the JWT of any user to achieve authentication bypass.

Versions of the package asyncua before 0.9.96 are vulnerable to Improper Authentication such that it is possible to access Address Space without encryption and authentication. **Note:** This issue is a result of missing checks for services that require an active session.

Digital Watchdog DW MEGApix IP cameras A7.2.2_20211029 allows unauthenticated attackers to view internal paths and scripts via web files.

An issue was discovered in Docmosis Tornado prior to version 2.9.5. An unauthenticated attacker can bypass the authentication check filter completely by introducing a specially crafted request with relative path segments.

In Xerox Workplace Suite, an API restricted to specific hosts can be bypassed by manipulating the Host header. If the server improperly validates or trusts the Host header without verifying the actual destination, an attacker can forge a value to gain unauthorized access. This exploit targets improper host validation, potentially exposing sensitive API endpoints.

Symphony process is a module for the Symphony PHP framework which executes commands in sub-processes. When consuming a persisted remember-me cookie, Symfony does not check if the username persisted in the database matches the username attached with the cookie, leading to authentication bypass. This vulnerability is fixed in 5.4.47, 6.4.15, and 7.1.8.

Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, A remote, unauthenticated attacker can send a request from the RSLogix 500 software to the victim’s MicroLogix controller. The controller will then respond to the client with used password values to authenticate the user on the client-side. This method of authentication may allow an attacker to bypass authentication altogether, disclose sensitive information, or leak credentials.

A vulnerability classified as problematic was found in Field Logic DataCube4 up to 20231001. This vulnerability affects unknown code of the file /api/ of the component Web API. The manipulation leads to improper authentication. The exploit has been disclosed to the public and may be used. VDB-241030 is the identifier assigned to this vulnerability.

The open-source identity infrastructure software Zitadel allows administrators to disable the user self-registration. Due to a missing security check in versions prior to 2.64.0, 2.63.5, 2.62.7, 2.61.4, 2.60.4, 2.59.5, and 2.58.7, disabling the "User Registration allowed" option only hid the registration button on the login page. Users could bypass this restriction by directly accessing the registration URL (/ui/login/loginname) and register a user that way. Versions 2.64.0, 2.63.5, 2.62.7, 2.61.4, 2.60.4, 2.59.5, and 2.58.7 contain a patch. No known workarounds are available.

D-Link DIR-890L FW1.10 A1 is vulnerable to Authentication bypass.

Grafana 8.4.3 allows unauthenticated access via (for example) a /dashboard/snapshot/*?orgId=0 URI. NOTE: the vendor considers this a UI bug, not a vulnerability

Sensitive information disclosure due to improper authentication. The following products are affected: Acronis Cyber Protect 15 (Windows, Linux) before build 29486, Acronis Cyber Backup 12.5 (Windows, Linux) before build 16545.

D-Link DIR-879 v105A1 is vulnerable to Authentication Bypass via phpcgi.

A vulnerability has been identified in Mendix SAML (Mendix 7 compatible) (All versions >= V1.16.4 < V1.17.3), Mendix SAML (Mendix 8 compatible) (All versions >= V2.2.0 < V2.3.0), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.1.9 < V3.3.1), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.1.8 < V3.3.0), Mendix SAML (Mendix 9.6 compatible, New Track) (All versions >= V3.1.9 < V3.2.7), Mendix SAML (Mendix 9.6 compatible, Upgrade Track) (All versions >= V3.1.8 < V3.2.6). The affected versions of the module insufficiently verify the SAML assertions. This could allow unauthenticated remote attackers to bypass authentication and get access to the application. For compatibility reasons, fix versions still contain this issue, but only when the recommended, default configuration option `'Use Encryption'` is disabled.

The Access Point functionality in eapol_auth_key_handle in eapol.c in iNet wireless daemon (IWD) before 2.14 allows attackers to gain unauthorized access to a protected Wi-Fi network. An attacker can complete the EAPOL handshake by skipping Msg2/4 and instead sending Msg4/4 with an all-zero key.

Improper authentication vulnerability in Cybozu Garoon 4.0.0 to 4.10.3 allows remote attackers to obtain data in Application Menu.

Because of an authentication flaw an attacker would be capable of generating a web report that discloses sensitive information such as internal IP addresses, usernames, store names and other sensitive information.

IBM Planning Analytics Cartridge for Cloud Pak for Data 4.0 connects to a CouchDB server. An attacker can exploit an insecure password policy to the CouchDB server and collect sensitive information from the database. IBM X-Force ID: 247905.

Unraid 6.8.0 allows authentication bypass.

This vulnerability allows remote attackers to bypass authentication on affected installations of PaperCut NG 22.0.5 (Build 63914). Authentication is not required to exploit this vulnerability. The specific flaw exists within the SecurityRequestFilter class. The issue results from improper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-19226.

Barco Control Room Management Suite web application, which is part of TransForm N before 3.14, is exposing log files without authentication.

IBM Spectrum Protect Client 8.1.7.0 through 8.1.9.1 (Linux and Windows), 8.1.9.0 trough 8.1.9.1 (AIX) and IBM Spectrum Protect for Space Management 8.1.7.0 through 8.1.9.1 (Linux), 8.1.9.0 through 8.1.9.1 (AIX) web user interfaces could allow an attacker to bypass authentication due to improper session validation which can result in access to unauthorized resources. IBM X-Force ID: 182019.

Improper authentication in the Intel(R) SDP Tool before version 3.0.0 may allow an unauthenticated user to potentially enable information disclosure via network access.

The Forgotten Password functionality of Rocket TRUfusion Portal v7.9.2.1 allows remote attackers to bypass authentication and access restricted pages by validating the user's session token when the "Password forgotten?" button is clicked.

Passport-wsfed-saml2 is a ws-federation protocol and SAML2 tokens authentication provider for Passport. In versions prior to 4.6.3, a remote attacker may be able to bypass WSFed authentication on a website using passport-wsfed-saml2. A successful attack requires that the attacker is in possession of an arbitrary IDP signed assertion. Depending on the IDP used, fully unauthenticated attacks (e.g without access to a valid user) might also be feasible if generation of a signed message can be triggered. This issue is patched in version 4.6.3. Use of SAML2 authentication instead of WSFed is a workaround.

An access control issue in D-Link DIR816L_FW206b01 allows unauthenticated attackers to access folders folder_view.php and category_view.php.

Misskey is an open source, decentralized social media platform. Prior to version 2023.9.0, by editing the URL, a user can bypass the authentication of the Bull dashboard, which is the job queue management UI, and access it. Version 2023.9.0 contains a fix. There are no known workarounds.

A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.