The eBPF RINGBUF bpf_ringbuf_reserve() function in the Linux kernel did not check that the allocated size was smaller than the ringbuf size, allowing an attacker to perform out-of-bounds writes within the kernel and therefore, arbitrary code execution. This issue was fixed via commit 4b81ccebaeee ("bpf, ringbuf: Deny reserve of buffers larger than ringbuf") (v5.13-rc4) and backported to the stable kernels in v5.12.4, v5.11.21, and v5.10.37. It was introduced via 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") (v5.8-rc1).

Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary.

The sock_setsockopt function in net/core/sock.c in the Linux kernel before 4.8.14 mishandles negative values of sk_sndbuf and sk_rcvbuf, which allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability for a crafted setsockopt system call with the (1) SO_SNDBUFFORCE or (2) SO_RCVBUFFORCE option.

drivers/vfio/pci/vfio_pci.c in the Linux kernel through 4.8.11 allows local users to bypass integer overflow checks, and cause a denial of service (memory corruption) or have unspecified other impact, by leveraging access to a vfio PCI device file for a VFIO_DEVICE_SET_IRQS ioctl call, aka a "state machine confusion bug."

The tipc_msg_build function in net/tipc/msg.c in the Linux kernel through 4.8.11 does not validate the relationship between the minimum fragment length and the maximum packet size, which allows local users to gain privileges or cause a denial of service (heap-based buffer overflow) by leveraging the CAP_NET_ADMIN capability.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix hashtab overflow check on 32-bit arches The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix DEVMAP_HASH overflow check on 32-bit arches The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation.

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in binderfs_evict_inode() Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well.

In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated---

The join_session_keyring function in security/keys/process_keys.c in the Linux kernel before 4.4.1 mishandles object references in a certain error case, which allows local users to gain privileges or cause a denial of service (integer overflow and use-after-free) via crafted keyctl commands.

In the Linux kernel before 5.1.17, ptrace_link in kernel/ptrace.c mishandles the recording of the credentials of a process that wants to create a ptrace relationship, which allows local users to obtain root access by leveraging certain scenarios with a parent-child process relationship, where a parent drops privileges and calls execve (potentially allowing control by an attacker). One contributing factor is an object lifetime issue (which can also cause a panic). Another contributing factor is incorrect marking of a ptrace relationship as privileged, which is exploitable through (for example) Polkit's pkexec helper with PTRACE_TRACEME. NOTE: SELinux deny_ptrace might be a usable workaround in some environments.

i915_gem_userptr_get_pages in drivers/gpu/drm/i915/i915_gem_userptr.c in the Linux kernel 4.15.0 on Ubuntu 18.04.2 allows local users to cause a denial of service (NULL pointer dereference and BUG) or possibly have unspecified other impact via crafted ioctl calls to /dev/dri/card0.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store() If the 'buf' array received from the user contains an empty string, the 'length' variable will be zero. Accessing the 'buf' array element with index 'length - 1' will result in a buffer overflow. Add a check for an empty string. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Authentication Bypass vulnerability in Hitachi Ops Center Common Services.This issue affects Hitachi Ops Center Common Services: from 10.9.3-00 before 11.0.2-01.

In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up.

The Linux kernel before 5.1-rc5 allows page->_refcount reference count overflow, with resultant use-after-free issues, if about 140 GiB of RAM exists. This is related to fs/fuse/dev.c, fs/pipe.c, fs/splice.c, include/linux/mm.h, include/linux/pipe_fs_i.h, kernel/trace/trace.c, mm/gup.c, and mm/hugetlb.c. It can occur with FUSE requests.

In the Linux kernel, the following vulnerability has been resolved: ndisc: use RCU protection in ndisc_alloc_skb() ndisc_alloc_skb() can be called without RTNL or RCU being held. Add RCU protection to avoid possible UAF.

Integer overflow in lib/asn1_decoder.c in the Linux kernel before 4.6 allows local users to gain privileges via crafted ASN.1 data.

In the Linux kernel, the following vulnerability has been resolved: dm cache: Fix UAF in destroy() Dm_cache also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in destroy().

In the Linux kernel, the following vulnerability has been resolved: kernfs: fix use-after-free in __kernfs_remove Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 </TASK> Allocated by task 855: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/slub: reset KASAN tag in defer_free() before accessing freed memory When CONFIG_SLUB_TINY is enabled, kfree_nolock() calls kasan_slab_free() before defer_free(). On ARM64 with MTE (Memory Tagging Extension), kasan_slab_free() poisons the memory and changes the tag from the original (e.g., 0xf3) to a poison tag (0xfe). When defer_free() then tries to write to the freed object to build the deferred free list via llist_add(), the pointer still has the old tag, causing a tag mismatch and triggering a KASAN use-after-free report: BUG: KASAN: slab-use-after-free in defer_free+0x3c/0xbc mm/slub.c:6537 Write at addr f3f000000854f020 by task kworker/u8:6/983 Pointer tag: [f3], memory tag: [fe] Fix this by calling kasan_reset_tag() before accessing the freed memory. This is safe because defer_free() is part of the allocator itself and is expected to manipulate freed memory for bookkeeping purposes.

In the Linux kernel, the following vulnerability has been resolved: scsi: aic94xx: fix use-after-free in device removal path The asd_pci_remove() function fails to synchronize with pending tasklets before freeing the asd_ha structure, leading to a potential use-after-free vulnerability. When a device removal is triggered (via hot-unplug or module unload), race condition can occur. The fix adds tasklet_kill() before freeing the asd_ha structure, ensuring all scheduled tasklets complete before cleanup proceeds.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] <TASK> [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra-adma: Fix use-after-free A use-after-free bug exists in the Tegra ADMA driver when audio streams are terminated, particularly during XRUN conditions. The issue occurs when the DMA buffer is freed by tegra_adma_terminate_all() before the vchan completion tasklet finishes accessing it. The race condition follows this sequence: 1. DMA transfer completes, triggering an interrupt that schedules the completion tasklet (tasklet has not executed yet) 2. Audio playback stops, calling tegra_adma_terminate_all() which frees the DMA buffer memory via kfree() 3. The scheduled tasklet finally executes, calling vchan_complete() which attempts to access the already-freed memory Since tasklets can execute at any time after being scheduled, there is no guarantee that the buffer will remain valid when vchan_complete() runs. Fix this by properly synchronizing the virtual channel completion: - Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the descriptors as terminated instead of freeing the descriptor. - Add the callback tegra_adma_synchronize() that calls vchan_synchronize() which kills any pending tasklets and frees any terminated descriptors. Crash logs: [ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0 [ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0 [ 337.427562] Call trace: [ 337.427564] dump_backtrace+0x0/0x320 [ 337.427571] show_stack+0x20/0x30 [ 337.427575] dump_stack_lvl+0x68/0x84 [ 337.427584] print_address_description.constprop.0+0x74/0x2b8 [ 337.427590] kasan_report+0x1f4/0x210 [ 337.427598] __asan_load8+0xa0/0xd0 [ 337.427603] vchan_complete+0x124/0x3b0 [ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0 [ 337.427617] tasklet_action+0x30/0x40 [ 337.427623] __do_softirq+0x1a0/0x5c4 [ 337.427628] irq_exit+0x110/0x140 [ 337.427633] handle_domain_irq+0xa4/0xe0 [ 337.427640] gic_handle_irq+0x64/0x160 [ 337.427644] call_on_irq_stack+0x20/0x4c [ 337.427649] do_interrupt_handler+0x7c/0x90 [ 337.427654] el1_interrupt+0x30/0x80 [ 337.427659] el1h_64_irq_handler+0x18/0x30 [ 337.427663] el1h_64_irq+0x7c/0x80 [ 337.427667] cpuidle_enter_state+0xe4/0x540 [ 337.427674] cpuidle_enter+0x54/0x80 [ 337.427679] do_idle+0x2e0/0x380 [ 337.427685] cpu_startup_entry+0x2c/0x70 [ 337.427690] rest_init+0x114/0x130 [ 337.427695] arch_call_rest_init+0x18/0x24 [ 337.427702] start_kernel+0x380/0x3b4 [ 337.427706] __primary_switched+0xc0/0xc8

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in a buffer overflow (although it's unrealistic). This patch replaces it with a safer version, scnprintf() for papering over such a potential issue.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: bound check rq_pages index in inline path svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without verifying rc_curpage stays within the allocated page array. Add guards before the first use and after advancing to a new page.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix gmap_helper_zap_one_page() again A few checks were missing in gmap_helper_zap_one_page(), which can lead to memory corruption in the guest under specific circumstances. Add the missing checks.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix "UBSAN: shift-out-of-bounds error" This patch ensures that the RX ring size (rx_pending) is not set below the permitted length. This avoids UBSAN shift-out-of-bounds errors when users passes small or zero ring sizes via ethtool -G.

A heap out-of-bounds write affecting Linux since v2.6.19-rc1 was discovered in net/netfilter/x_tables.c. This allows an attacker to gain privileges or cause a DoS (via heap memory corruption) through user name space

The aio_mount function in fs/aio.c in the Linux kernel before 4.7.7 does not properly restrict execute access, which makes it easier for local users to bypass intended SELinux W^X policy restrictions, and consequently gain privileges, via an io_setup system call.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc() TID getting from ieee80211_get_tid() might be out of range of array size of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise, UBSAN warn: UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30 index 10 is out of range for type 'rtl_tid_data [9]'

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats() Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters update") added three new counters and placed them after BNXT_RE_OUT_OF_SEQ_ERR. BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware statistics with different num_counters values on chip_gen_p5_p7 devices. As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating hw_stats, which leads to an out-of-bounds write in bnxt_re_copy_err_stats(). The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not only p5/p7 devices. Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they are included in the generic counter set.

In the Linux kernel, the following vulnerability has been resolved: team: fix check for port enabled in team_queue_override_port_prio_changed() There has been a syzkaller bug reported recently with the following trace: list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:59! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59 Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d49f370 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000 RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005 RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230 R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480 FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:223 [inline] list_del_rcu include/linux/rculist.h:178 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:826 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:821 [inline] team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline] team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534 team_option_set drivers/net/team/team_core.c:376 [inline] team_nl_options_set_doit+0x8ae/0xe60 drivers/net/team/team_core.c:2653 genl_family_rcv_msg_doit+0x209/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2630 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2684 __sys_sendmsg+0x16d/0x220 net/socket.c:2716 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The problem is in this flow: 1) Port is enabled, queue_id != 0, in qom_list 2) Port gets disabled -> team_port_disable() -> team_queue_override_port_del() -> del (removed from list) 3) Port is disabled, queue_id != 0, not in any list 4) Priority changes -> team_queue_override_port_prio_changed() -> checks: port disabled && queue_id != 0 -> calls del - hits the BUG as it is removed already To fix this, change the check in team_queue_override_port_prio_changed() so it returns early if port is not enabled.

In the Linux kernel, the following vulnerability has been resolved: gve: defer interrupt enabling until NAPI registration Currently, interrupts are automatically enabled immediately upon request. This allows interrupt to fire before the associated NAPI context is fully initialized and cause failures like below: [ 0.946369] Call Trace: [ 0.946369] <IRQ> [ 0.946369] __napi_poll+0x2a/0x1e0 [ 0.946369] net_rx_action+0x2f9/0x3f0 [ 0.946369] handle_softirqs+0xd6/0x2c0 [ 0.946369] ? handle_edge_irq+0xc1/0x1b0 [ 0.946369] __irq_exit_rcu+0xc3/0xe0 [ 0.946369] common_interrupt+0x81/0xa0 [ 0.946369] </IRQ> [ 0.946369] <TASK> [ 0.946369] asm_common_interrupt+0x22/0x40 [ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10 Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto enablement and explicitly enable the interrupt in NAPI initialization path (and disable it during NAPI teardown). This ensures that interrupt lifecycle is strictly coupled with readiness of NAPI context.

In the Linux kernel, the following vulnerability has been resolved: iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED syzkaller found it could overflow math in the test infrastructure and cause a WARN_ON by corrupting the reserved interval tree. This only effects test kernels with CONFIG_IOMMUFD_TEST. Validate the user input length in the test ioctl.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node() Previously, btrfs_get_or_create_delayed_node() set the delayed_node's refcount before acquiring the root->delayed_nodes lock. Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes") moved refcount_set inside the critical section, which means there is no longer a memory barrier between setting the refcount and setting btrfs_inode->delayed_node. Without that barrier, the stores to node->refs and btrfs_inode->delayed_node may become visible out of order. Another thread can then read btrfs_inode->delayed_node and attempt to increment a refcount that hasn't been set yet, leading to a refcounting bug and a use-after-free warning. The fix is to move refcount_set back to where it was to take advantage of the implicit memory barrier provided by lock acquisition. Because the allocations now happen outside of the lock's critical section, they can use GFP_NOFS instead of GFP_ATOMIC.

In the Linux kernel, the following vulnerability has been resolved: Input: lkkbd - disable pending work before freeing device lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work handler lkkbd_reinit() dereferences the lkkbd structure and its serio/input_dev fields. lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd structure without preventing the reinit work from being queued again until serio_close() returns. This can allow the work handler to run after the structure has been freed, leading to a potential use-after-free. Use disable_work_sync() instead of cancel_work_sync() to ensure the reinit work cannot be re-queued, and call it both in lkkbd_disconnect() and in lkkbd_connect() error paths after serio_open().

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: exynos-clkout: Assign .num before accessing .hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS) about the number of elements in .hws[], so that it can warn when .hws[] is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in exynos_clkout_probe() due to .num being assigned after .hws[] has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18 index 0 is out of range for type 'clk_hw *[*]' Move the .num initialization to before the first access of .hws[], clearing up the warning.

In the Linux kernel, the following vulnerability has been resolved: i2c: piix4: Fix adapter not be removed in piix4_remove() In piix4_probe(), the piix4 adapter will be registered in: piix4_probe() piix4_add_adapters_sb800() / piix4_add_adapter() i2c_add_adapter() Based on the probed device type, piix4_add_adapters_sb800() or single piix4_add_adapter() will be called. For the former case, piix4_adapter_count is set as the number of adapters, while for antoher case it is not set and kept default *zero*. When piix4 is removed, piix4_remove() removes the adapters added in piix4_probe(), basing on the piix4_adapter_count value. Because the count is zero for the single adapter case, the adapter won't be removed and makes the sources allocated for adapter leaked, such as the i2c client and device. These sources can still be accessed by i2c or bus and cause problems. An easily reproduced case is that if a new adapter is registered, i2c will get the leaked adapter and try to call smbus_algorithm, which was already freed: Triggered by: rmmod i2c_piix4 && modprobe max31730 BUG: unable to handle page fault for address: ffffffffc053d860 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3752 Comm: modprobe Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core RSP: 0018:ffff888107477710 EFLAGS: 00000246 ... <TASK> i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core __process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core bus_for_each_dev (drivers/base/bus.c:301) i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... </TASK> ---[ end trace 0000000000000000 ]--- Fix this problem by correctly set piix4_adapter_count as 1 for the single adapter so it can be normally removed.

In the Linux kernel, the following vulnerability has been resolved: smb/server: call ksmbd_session_rpc_close() on error path in create_smb2_pipe() When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close().

In the Linux kernel, the following vulnerability has been resolved: x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their CPU masks and unconditionally accesses per-CPU data for the first CPU of each mask. According to Documentation/admin-guide/mm/numaperf.rst: "Some memory may share the same node as a CPU, and others are provided as memory only nodes." Therefore, some node CPU masks may be empty and wouldn't have a "first CPU". On a machine with far memory (and therefore CPU-less NUMA nodes): - cpumask_of_node(nid) is 0 - cpumask_first(0) is CONFIG_NR_CPUS - cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an index that is 1 out of bounds This does not have any security implications since flashing microcode is a privileged operation but I believe this has reliability implications by potentially corrupting memory while flashing a microcode update. When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes a microcode update. I get the following splat: UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y index 512 is out of range for type 'unsigned long[512]' [...] Call Trace: dump_stack __ubsan_handle_out_of_bounds load_microcode_amd request_microcode_amd reload_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Change the loop to go over only NUMA nodes which have CPUs before determining whether the first CPU on the respective node needs microcode update. [ bp: Massage commit message, fix typo. ]

In the Linux kernel, the following vulnerability has been resolved: usb: phy: isp1301: fix non-OF device reference imbalance A recent change fixing a device reference leak in a UDC driver introduced a potential use-after-free in the non-OF case as the isp1301_get_client() helper only increases the reference count for the returned I2C device in the OF case. Increment the reference count also for non-OF so that the caller can decrement it unconditionally. Note that this is inherently racy just as using the returned I2C device is since nothing is preventing the PHY driver from being unbound while in use.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: properly keep track of conduit reference Problem description ------------------- DSA has a mumbo-jumbo of reference handling of the conduit net device and its kobject which, sadly, is just wrong and doesn't make sense. There are two distinct problems. 1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch: (unbind the conduit driver for net device eno2) echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind we see these lines in the output diff which appear only with the patch applied: kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000) kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000) 2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()). Actually we actually use that netdev tracker mechanism implicitly on user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link(). But time still passes at DSA switch probe time between the initial of_find_net_device_by_node() code and the user port creation time, time during which the conduit could unregister itself and DSA wouldn't know about it. So we have to run of_find_net_device_by_node() under rtnl_lock() to prevent that from happening, and release the lock only with the netdev tracker having acquired the reference. Do we need to keep the reference until dsa_unregister_switch() / dsa_switch_shutdown()? 1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference. 2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed. As for the conduit's kobject for the /sys/class/net/ entry, we don't care about it, we can release it as soon as we hold the net device object itself. History and blame attribution ----------------------------- The code has been refactored so many times, it is very difficult to follow and properly attribute a blame, but I'll try to make a short history which I hope to be correct. We have two distinct probing paths: - one for OF, introduced in 2016 i ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: fix use-after-free on probe deferral The driver is dropping the references taken to the larb devices during probe after successful lookup as well as on errors. This can potentially lead to a use-after-free in case a larb device has not yet been bound to its driver so that the iommu driver probe defers. Fix this by keeping the references as expected while the iommu driver is bound.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix potential UAF in xe_oa_add_config_ioctl() In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping metrics_lock. Since this lock protects the lifetime of oa_config, an attacker could guess the id and call xe_oa_remove_config_ioctl() with perfect timing, freeing oa_config before we dereference it, leading to a potential use-after-free. Fix this by caching the id in a local variable while holding the lock. v2: (Matt A) - Dropped mutex_unlock(&oa->metrics_lock) ordering change from xe_oa_remove_config_ioctl() (cherry picked from commit 28aeaed130e8e587fd1b73b6d66ca41ccc5a1a31)

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: always drop device refcount in ib_del_sub_device_and_put() Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add support to add/delete a sub IB device through netlink") grabs a reference using ib_device_get_by_index() before calling ib_del_sub_device_and_put(), we need to drop that reference before returning -EOPNOTSUPP error.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: revert use of devm_kzalloc in btusb This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the other interfaces of the driver that may not be released yet. To fix this, revert the use of devm and go back to freeing memory explicitly.

In the Linux kernel, the following vulnerability has been resolved: net: arc_emac: Fix use after free in arc_mdio_probe() If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup Commit b3c9a924aab6 ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove") fixed a use-after-free error due the vesafb driver freeing the fb_info in the .remove handler instead of doing it in .fb_destroy. This can happen if the .fb_destroy callback is executed after the .remove callback, since the former tries to access a pointer freed by the latter. But that change didn't take into account that another possible scenario is that .fb_destroy is called before the .remove callback. For example, if no process has the fbdev chardev opened by the time the driver is removed. If that's the case, fb_info will be freed when unregister_framebuffer() is called, making the fb_info pointer accessed in vesafb_remove() after that to no longer be valid. To prevent that, move the expression containing the info->par to happen before the unregister_framebuffer() function call.