In the Linux kernel, the following vulnerability has been resolved: net: validate lwtstate->data before returning from skb_tunnel_info() skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ]

In the Linux kernel, the following vulnerability has been resolved: nfnetlink_osf: validate individual option lengths in fingerprints nfnl_osf_add_callback() validates opt_num bounds and string NUL-termination but does not check individual option length fields. A zero-length option causes nf_osf_match_one() to enter the option matching loop even when foptsize sums to zero, which matches packets with no TCP options where ctx->optp is NULL: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:227) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:293) nf_hook_slow (net/netfilter/core.c:623) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) Additionally, an MSS option (kind=2) with length < 4 causes out-of-bounds reads when nf_osf_match_one() unconditionally accesses optp[2] and optp[3] for MSS value extraction. While RFC 9293 section 3.2 specifies that the MSS option is always exactly 4 bytes (Kind=2, Length=4), the check uses "< 4" rather than "!= 4" because lengths greater than 4 do not cause memory safety issues -- the buffer is guaranteed to be at least foptsize bytes by the ctx->optsize == foptsize check. Reject fingerprints where any option has zero length, or where an MSS option has length less than 4, at add time rather than trusting these values in the packet matching hot path.

In the Linux kernel, the following vulnerability has been resolved: ataflop: potential out of bounds in do_format() The function uses "type" as an array index: q = unit[drive].disk[type]->queue; Unfortunately the bounds check on "type" isn't done until later in the function. Fix this by moving the bounds check to the start.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc ..

In the Linux kernel, the following vulnerability has been resolved: mtd: physmap: physmap-bt1-rom: Fix unintentional stack access Cast &data to (char *) in order to avoid unintentionally accessing the stack. Notice that data is of type u32, so any increment to &data will be in the order of 4-byte chunks, and this piece of code is actually intended to be a byte offset. Addresses-Coverity-ID: 1497765 ("Out-of-bounds access")

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out of bounds reads when finding clock sources The current USB-audio driver code doesn't check bLength of each descriptor at traversing for clock descriptors. That is, when a device provides a bogus descriptor with a shorter bLength, the driver might hit out-of-bounds reads. For addressing it, this patch adds sanity checks to the validator functions for the clock descriptor traversal. When the descriptor length is shorter than expected, it's skipped in the loop. For the clock source and clock multiplier descriptors, we can just check bLength against the sizeof() of each descriptor type. OTOH, the clock selector descriptor of UAC2 and UAC3 has an array of bNrInPins elements and two more fields at its tail, hence those have to be checked in addition to the sizeof() check.

In the Linux kernel, the following vulnerability has been resolved: ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111 The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0

In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Don't generate an interrupt on bus reset Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix stack OOB read while fragmenting IPv4 packets running openvswitch on kernels built with KASAN, it's possible to see the following splat while testing fragmentation of IPv4 packets: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888112fc713c by task handler2/1367 CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 ovs_fragment+0x5bf/0x840 [openvswitch] do_execute_actions+0x1bd5/0x2400 [openvswitch] ovs_execute_actions+0xc8/0x3d0 [openvswitch] ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch] genl_family_rcv_msg_doit.isra.15+0x227/0x2d0 genl_rcv_msg+0x287/0x490 netlink_rcv_skb+0x120/0x380 genl_rcv+0x24/0x40 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f957079db07 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07 RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019 RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0 The buggy address belongs to the page: page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame: ovs_fragment+0x0/0x840 [openvswitch] this frame has 2 objects: [32, 144) 'ovs_dst' [192, 424) 'ovs_rt' Memory state around the buggy address: ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00 >ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 ^ ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in ovs_fragment(), similarly to what is done for IPv6 few lines below.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Add hash_key_length check Add hash_key_length check in virtnet_probe() to avoid possible out of bound errors when setting/reading the hash key.

In the Linux kernel, the following vulnerability has been resolved: net_sched: keep alloc_hash updated after hash allocation In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash().

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number

In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_4xxx - fix off by one in uof_get_name() The fw_objs[] array has "num_objs" elements so the > needs to be >= to prevent an out of bounds read.

In the Linux kernel, the following vulnerability has been resolved: bpf: Check validity of link->type in bpf_link_show_fdinfo() If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing bpf_link_type_strs[link->type] may result in an out-of-bounds access. To spot such missed invocations early in the future, checking the validity of link->type in bpf_link_show_fdinfo() and emitting a warning when such invocations are missed.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix UBSAN shift-out-of-bounds warning If get_num_sdma_queues or get_num_xgmi_sdma_queues is 0, we end up doing a shift operation where the number of bits shifted equals number of bits in the operand. This behaviour is undefined. Set num_sdma_queues or num_xgmi_sdma_queues to ULLONG_MAX, if the count is >= number of bits in the operand. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1472

In the Linux kernel, the following vulnerability has been resolved: igb: Fix potential invalid memory access in igb_init_module() The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access.

An issue was discovered in the Linux kernel before 5.8.1. net/bluetooth/hci_event.c has a slab out-of-bounds read in hci_extended_inquiry_result_evt, aka CID-51c19bf3d5cf.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix increasing MSI-X on VF Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: fix global oob in wwan_rtnl_policy The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. Exactly same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"). ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862 CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x14f/0x750 mm/kasan/report.c:395 kasan_report+0x139/0x170 mm/kasan/report.c:495 validate_nla lib/nlattr.c:388 [inline] __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 __nla_parse+0x3c/0x50 lib/nlattr.c:700 nla_parse_nested_deprecated include/net/netlink.h:1269 [inline] __rtnl_newlink net/core/rtnetlink.c:3514 [inline] rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623 rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f67b19a24ad RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004 RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40 </TASK> The buggy address belongs to the variable: wwan_rtnl_policy+0x20/0x40 The buggy address belongs to the physical page: page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner info is not present (never set?) Memory state around the buggy address: ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9 ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 >ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 ^ ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== According to the comment of `nla_parse_nested_deprecated`, use correct size `IFLA_WWAN_MAX` here to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd() The "*cmd" variable can be controlled by the user via debugfs. That means "new_cam" can be as high as 255 while the size of the uc->updated[] array is UCSI_MAX_ALTMODES (30). The call tree is: ucsi_cmd() // val comes from simple_attr_write_xsigned() -> ucsi_send_command() -> ucsi_send_command_common() -> ucsi_run_command() // calls ucsi->ops->sync_control() -> ucsi_ccg_sync_control()

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented.

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix potential out-of-bounds access on the first resume Out-of-bounds access occurs if the fast device is expanded unexpectedly before the first-time resume of the cache table. This happens because expanding the fast device requires reloading the cache table for cache_create to allocate new in-core data structures that fit the new size, and the check in cache_preresume is not performed during the first resume, leading to the issue. Reproduce steps: 1. prepare component devices: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct 2. load a cache table of 512 cache blocks, and deliberately expand the fast device before resuming the cache, making the in-core data structures inadequate. dmsetup create cache --notable dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache 3. suspend the cache to write out the in-core dirty bitset and hint array, leading to out-of-bounds access to the dirty bitset at offset 0x40: dmsetup suspend cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80 Read of size 8 at addr ffffc90000085040 by task dmsetup/90 (...snip...) The buggy address belongs to the virtual mapping at [ffffc90000085000, ffffc90000087000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by checking the size change on the first resume.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read")

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential oob read in nilfs_btree_check_delete() The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix out-of-bounds in dbNextAG() and diAlloc() In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ucode out-of-bounds read warning Clear warning that read ucode[] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: bpf: add check for invalid name in btf_name_valid_section() If the length of the name string is 1 and the value of name[0] is NULL byte, an OOB vulnerability occurs in btf_name_valid_section() and the return value is true, so the invalid name passes the check. To solve this, you need to check if the first position is NULL byte and if the first character is printable.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds read of df_v1_7_channel_number Check the fb_channel_number range to avoid the array out-of-bounds read error

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix out-of-bounds access in sysfs attribute read/write Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: use skb_header_pointer_careful() skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221

In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.

In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix potential OOB access in audio mixer handling In the audio mixer handling code of ctxfi driver, the conf field is used as a kind of loop index, and it's referred in the index callbacks (amixer_index() and sum_index()). As spotted recently by fuzzers, the current code causes OOB access at those functions. | UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48 | index 8 is out of range for type 'unsigned char [8]' After the analysis, the cause was found to be the lack of the proper (re-)initialization of conj field. This patch addresses those OOB accesses by adding the proper initializations of the loop indices.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove().

In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed() cxl_payload_from_user_allowed() casts and dereferences the input payload without first verifying its size. When a raw mailbox command is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG, which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer, triggering a KASAN splat: BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683 Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258 CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x650 mm/kasan/report.c:482 kasan_report+0xce/0x100 mm/kasan/report.c:595 memcmp+0x176/0x1d0 lib/string.c:683 uuid_equal include/linux/uuid.h:73 [inline] cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline] cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline] cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline] cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643 __cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline] cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdaf331ba79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79 RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003 RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768 </TASK> Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate the payload is large enough.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Use correct version for UAC3 header validation The entry of the validators table for UAC3 AC header descriptor is defined with the wrong protocol version UAC_VERSION_2, while it should have been UAC_VERSION_3. This results in the validator never matching for actual UAC3 devices (protocol == UAC_VERSION_3), causing their header descriptors to bypass validation entirely. A malicious USB device presenting a truncated UAC3 header could exploit this to cause out-of-bounds reads when the driver later accesses unvalidated descriptor fields. The bug was introduced in the same commit as the recently fixed UAC3 feature unit sub-type typo, and appears to be from the same copy-paste error when the UAC3 section was created from the UAC2 section.

In the Linux kernel, the following vulnerability has been resolved: bonding: limit BOND_MODE_8023AD to Ethernet devices BOND_MODE_8023AD makes sense for ARPHRD_ETHER only. syzbot reported: BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline] BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497 CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 __hw_addr_create net/core/dev_addr_lists.c:63 [inline] __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:868 [inline] dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886 bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180 do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963 do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 ____sys_sendmsg+0x505/0x820 net/socket.c:2592 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646 __sys_sendmsg+0x164/0x220 net/socket.c:2678 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307 do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332 entry_SYSENTER_compat_after_hwframe+0x84/0x8e </TASK> The buggy address belongs to the variable: lacpdu_mcast_addr+0x0/0x40

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Fix restoration of SVE context When SME is supported, Restoring SVE signal context can go wrong in a few ways, including placing the task into an invalid state where the kernel may read from out-of-bounds memory (and may potentially take a fatal fault) and/or may kill the task with a SIGKILL. (1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into an invalid state where SVCR.SM is set (and sve_state is non-NULL) but TIF_SME is clear, consequently resuting in out-of-bounds memory reads and/or killing the task with SIGKILL. This can only occur in unusual (but legitimate) cases where the SVE signal context has either been modified by userspace or was saved in the context of another task (e.g. as with CRIU), as otherwise the presence of an SVE signal context with SVE_SIG_FLAG_SM implies that TIF_SME is already set. While in this state, task_fpsimd_load() will NOT configure SMCR_ELx (leaving some arbitrary value configured in hardware) before restoring SVCR and attempting to restore the streaming mode SVE registers from memory via sve_load_state(). As the value of SMCR_ELx.LEN may be larger than the task's streaming SVE vector length, this may read memory outside of the task's allocated sve_state, reading unrelated data and/or triggering a fault. While this can result in secrets being loaded into streaming SVE registers, these values are never exposed. As TIF_SME is clear, fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0 accesses to streaming mode SVE registers, so these cannot be accessed directly at EL0. As fpsimd_save_user_state() verifies the live vector length before saving (S)SVE state to memory, no secret values can be saved back to memory (and hence cannot be observed via ptrace, signals, etc). When the live vector length doesn't match the expected vector length for the task, fpsimd_save_user_state() will send a fatal SIGKILL signal to the task. Hence the task may be killed after executing userspace for some period of time. (2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the task's SVCR.SM. If SVCR.SM was set prior to restoring the context, then the task will be left in streaming mode unexpectedly, and some register state will be combined inconsistently, though the task will be left in legitimate state from the kernel's PoV. This can only occur in unusual (but legitimate) cases where ptrace has been used to set SVCR.SM after entry to the sigreturn syscall, as syscall entry clears SVCR.SM. In these cases, the the provided SVE register data will be loaded into the task's sve_state using the non-streaming SVE vector length and the FPSIMD registers will be merged into this using the streaming SVE vector length. Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires ensuring that the task's sme_state has been allocated, but as this could contain live ZA state, it should not be zeroed. Fix (2) by clearing SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear. For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME, and fp_type earlier, immediately after the allocation of sve_state/sme_state, before the restore of the actual register state. This makes it easier to ensure that these are always modified consistently, even if a fault is taken while reading the register data from the signal context. I do not expect any software to depend on the exact state restored when a fault is taken while reading the context.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob access. [fix check to also cover mgmt->u.action.u.addba_req.capab, correct Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix the Out-of-bounds read warning using index i - 1U may beyond element index for mc_data[] when i = 0.

In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in handle_auth_done() Perform an explicit bounds check on payload_len to avoid a possible out-of-bounds access in the callout. [ idryomov: changelog ]

In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix input error path memory access When there is a misconfiguration of input state slow path KASAN report error. Fix this error. west login: [ 52.987278] eth1: renamed from veth11 [ 53.078814] eth1: renamed from veth21 [ 53.181355] eth1: renamed from veth31 [ 54.921702] ================================================================== [ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295 [ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512 [ 54.924169] [ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25 [ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 54.926401] Call Trace: [ 54.926731] <IRQ> [ 54.927009] dump_stack_lvl+0x2a/0x3b [ 54.927478] kasan_report+0x84/0xa6 [ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295 [ 54.928410] xfrmi_rcv_cb+0x2d/0x295 [ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e [ 54.929354] xfrm4_rcv_cb+0x46/0x5e [ 54.929804] xfrm_rcv_cb+0x7e/0xa1 [ 54.930240] xfrm_input+0x1b3a/0x1b96 [ 54.930715] ? xfrm_offload+0x41/0x41 [ 54.931182] ? raw_rcv+0x292/0x292 [ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2 [ 54.932158] ? skb_sec_path+0xd/0x3f [ 54.932610] ? xfrmi_input+0x90/0xce [ 54.933066] xfrm4_esp_rcv+0x33/0x54 [ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2 [ 54.934089] ip_local_deliver_finish+0x110/0x120 [ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.935248] NF_HOOK.constprop.0+0xf8/0x138 [ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168 [ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.938135] NF_HOOK.constprop.0+0xf8/0x138 [ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.939904] ? ip_local_deliver_finish+0x120/0x120 [ 54.940497] __netif_receive_skb_one_core+0xc9/0x107 [ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2 [ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9 [ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38 [ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b [ 54.943618] process_backlog+0xb3/0x187 [ 54.944102] __napi_poll.constprop.0+0x57/0x1a7 [ 54.944669] net_rx_action+0x1cb/0x380 [ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7 [ 54.945744] ? vring_new_virtqueue+0x17a/0x17a [ 54.946300] ? note_interrupt+0x2cd/0x367 [ 54.946805] handle_softirqs+0x13c/0x2c9 [ 54.947300] do_softirq+0x5f/0x7d [ 54.947727] </IRQ> [ 54.948014] <TASK> [ 54.948300] __local_bh_enable_ip+0x48/0x62 [ 54.948832] __neigh_event_send+0x3fd/0x4ca [ 54.949361] neigh_resolve_output+0x1e/0x210 [ 54.949896] ip_finish_output2+0x4bf/0x4f0 [ 54.950410] ? __ip_finish_output+0x171/0x1b8 [ 54.950956] ip_send_skb+0x25/0x57 [ 54.951390] raw_sendmsg+0xf95/0x10c0 [ 54.951850] ? check_new_pages+0x45/0x71 [ 54.952343] ? raw_hash_sk+0x21b/0x21b [ 54.952815] ? kernel_init_pages+0x42/0x51 [ 54.953337] ? prep_new_page+0x44/0x51 [ 54.953811] ? get_page_from_freelist+0x72b/0x915 [ 54.954390] ? signal_pending_state+0x77/0x77 [ 54.954936] ? preempt_count_sub+0x14/0xb3 [ 54.955450] ? __might_resched+0x8a/0x240 [ 54.955951] ? __might_sleep+0x25/0xa0 [ 54.956424] ? first_zones_zonelist+0x2c/0x43 [ 54.956977] ? __rcu_read_lock+0x2d/0x3a [ 54.957476] ? __pte_offset_map+0x32/0xa4 [ 54.957980] ? __might_resched+0x8a/0x240 [ 54.958483] ? __might_sleep+0x25/0xa0 [ 54.958963] ? inet_send_prepare+0x54/0x54 [ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c [ 54.960000] sock_sendmsg_nosec+0x42/0x6c [ 54.960502] __sys_sendto+0x15d/0x1cc [ 54.960966] ? __x64_sys_getpeername+0x44/0x44 [ 54.961522] ? __handle_mm_fault+0x679/0xae4 [ 54.962068] ? find_vma+0x6b/0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to shrink read extent node in batches We use rwlock to protect core structure data of extent tree during its shrink, however, if there is a huge number of extent nodes in extent tree, during shrink of extent tree, it may hold rwlock for a very long time, which may trigger kernel hang issue. This patch fixes to shrink read extent node in batches, so that, critical region of the rwlock can be shrunk to avoid its extreme long time hold.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. (cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bound read in smb2_write ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If ->NextCommand is bigger than Offset + Length of smb2 write, It will allow oversized smb2 write length. It will cause OOB read in smb2_write.

In the Linux kernel, the following vulnerability has been resolved: kobject_uevent: Fix OOB access within zap_modalias_env() zap_modalias_env() wrongly calculates size of memory block to move, so will cause OOB memory access issue if variable MODALIAS is not the last one within its @env parameter, fixed by correcting size to memmove.