In the Linux kernel, the following vulnerability has been resolved: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_read (drivers/tty/vt/vc_screen.c:415) vfs_read (fs/read_write.c:468 fs/read_write.c:450) ... </TASK> Allocated by task 1191: ... kmalloc_trace (mm/slab_common.c:1069) vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720 drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108) con_install (drivers/tty/vt/vt.c:3383) tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413 drivers/tty/tty_io.c:1390) tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:883) vfs_open (fs/open.c:1014) ... Freed by task 1548: ... kfree (mm/slab_common.c:1021) vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2776) ... The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of 1024-byte region [ffff888113747800, ffff888113747c00) The buggy address belongs to the physical page: page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x113740 head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER) Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix use-after-free vulnerability in amdtee_close_session There is a potential race condition in amdtee_close_session that may cause use-after-free in amdtee_open_session. For instance, if a session has refcount == 1, and one thread tries to free this session via: kref_put(&sess->refcount, destroy_session); the reference count will get decremented, and the next step would be to call destroy_session(). However, if in another thread, amdtee_open_session() is called before destroy_session() has completed execution, alloc_session() may return 'sess' that will be freed up later in destroy_session() leading to use-after-free in amdtee_open_session. To fix this issue, treat decrement of sess->refcount and removal of 'sess' from session list in destroy_session() as a critical section, so that it is executed atomically.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug. Set the tcp_sw_host->session after we have completed session creation and can no longer fail.

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop().

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix uaf in smb20_oplock_break_ack drop reference after use opinfo.

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_inode's cache, dic may be released, it needs break the loop rather than continuing it, in order to avoid accessing invalid dic pointer.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix gtk offload status event locking The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] u ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hsr: Prevent use after free in prp_create_tagged_frame() The prp_fill_rct() function can fail. In that situation, it frees the skb and returns NULL. Meanwhile on the success path, it returns the original skb. So it's straight forward to fix bug by using the returned value.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential context UAFs gem_context_register() makes the context visible to userspace, and which point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl. So we need to ensure that nothing uses the ctx ptr after this. And we need to ensure that adding the ctx to the xarray is the *last* thing that gem_context_register() does with the ctx pointer. [tursulin: Stable and fixes tags add/tidy.] (cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c)

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup.

In the Linux kernel, the following vulnerability has been resolved: net: nfc: Fix use-after-free in local_cleanup() Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301)

There is a logic error in io_uring's implementation which can be used to trigger a use-after-free vulnerability leading to privilege escalation. In the io_prep_async_work function the assumption that the last io_grab_identity call cannot return false is not true, and in this case the function will use the init_cred or the previous linked requests identity to do operations instead of using the current identity. This can lead to reference counting issues causing use-after-free. We recommend upgrading past version 5.10.161.

In the Linux kernel, the following vulnerability has been resolved: net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..). If some error happens in emac_tx_fill_tpd(), the skb will be freed via dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd(). But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len). As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len, thus my patch assigns skb->len to 'len' before the possible free and use 'len' instead of skb->len later.

In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ssip_xmit_work ssi_protocol_remove | kfree(ssi); | | struct hsi_client *cl = ssi->cl; | // use ssi Fix it by ensuring that the work is canceled before proceeding with the cleanup in ssi_protocol_remove().

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcmu: Fix possible page UAF tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix use after free in remove_phb_dynamic() In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed.

In the Linux kernel, the following vulnerability has been resolved: mt76: fix tx status related use-after-free race on station removal There is a small race window where ongoing tx activity can lead to a skb getting added to the status tracking idr after that idr has already been cleaned up, which will keep the wcid linked in the status poll list. Fix this by only adding status skbs if the wcid pointer is still assigned in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is returned.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3 Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c Patchwork: https://patchwork.freedesktop.org/patch/483255/ [DB: fixed Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: NFC: NULL out the dev->rfkill to prevent UAF Commit 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") assumes the device_is_registered() in function nfc_dev_up() will help to check when the rfkill is unregistered. However, this check only take effect when device_del(&dev->dev) is done in nfc_unregister_device(). Hence, the rfkill object is still possible be dereferenced. The crash trace in latest kernel (5.18-rc2): [ 68.760105] ================================================================== [ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750 [ 68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313 [ 68.760756] [ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4 [ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 68.760756] Call Trace: [ 68.760756] <TASK> [ 68.760756] dump_stack_lvl+0x57/0x7d [ 68.760756] print_report.cold+0x5e/0x5db [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] kasan_report+0xbe/0x1c0 [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] __lock_acquire+0x3ec1/0x6750 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? register_lock_class+0x18d0/0x18d0 [ 68.760756] lock_acquire+0x1ac/0x4f0 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0 [ 68.760756] ? nla_get_range_signed+0x540/0x540 [ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 68.760756] _raw_spin_lock_irqsave+0x39/0x50 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] rfkill_blocked+0xe/0x60 [ 68.760756] nfc_dev_up+0x84/0x260 [ 68.760756] nfc_genl_dev_up+0x90/0xe0 [ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230 [ 68.760756] ? security_capable+0x51/0x90 [ 68.760756] genl_rcv_msg+0x280/0x500 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? lock_acquire+0x1ac/0x4f0 [ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] netlink_rcv_skb+0x11b/0x340 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? netlink_ack+0x9c0/0x9c0 [ 68.760756] ? netlink_deliver_tap+0x136/0xb00 [ 68.760756] genl_rcv+0x1f/0x30 [ 68.760756] netlink_unicast+0x430/0x710 [ 68.760756] ? memset+0x20/0x40 [ 68.760756] ? netlink_attachskb+0x740/0x740 [ 68.760756] ? __build_skb_around+0x1f4/0x2a0 [ 68.760756] netlink_sendmsg+0x75d/0xc00 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] sock_sendmsg+0xdf/0x110 [ 68.760756] __sys_sendto+0x19e/0x270 [ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0 [ 68.760756] ? fd_install+0x178/0x4c0 [ 68.760756] ? fd_install+0x195/0x4c0 [ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 68.760756] __x64_sys_sendto+0xd8/0x1b0 [ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130 [ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] RIP: 0033:0x7f67fb50e6b3 ... [ 68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3 [ 68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003 [ 68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c [ 68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e [ 68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003 [ 68.760756] </TASK> [ 68.760756] [ 68.760756] Allocated by task 279: [ 68.760756] kasan_save_stack+0x1e/0x40 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: Fix the error handling in cx23885_initdev() When the driver fails to call the dma_set_mask(), the driver will get the following splat: [ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50 This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid skb access on nf_stolen When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN".

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure.

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove() In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io triggers KASAN use-after-free. To avoid the use-after-free, keep the reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to fsl_destroy_mc_io(). This patch needs rework to apply to kernels older than v5.15.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref().

In the Linux kernel, the following vulnerability has been resolved: tipc: re-fetch skb cb after tipc_msg_validate As the call trace shows, the original skb was freed in tipc_msg_validate(), and dereferencing the old skb cb would cause an use-after-free crash. BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] Call Trace: <IRQ> tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] ... Allocated by task 47078: kmem_cache_alloc_node+0x158/0x4d0 __alloc_skb+0x1c1/0x270 tipc_buf_acquire+0x1e/0xe0 [tipc] tipc_msg_create+0x33/0x1c0 [tipc] tipc_link_build_proto_msg+0x38a/0x2100 [tipc] tipc_link_timeout+0x8b8/0xef0 [tipc] tipc_node_timeout+0x2a1/0x960 [tipc] call_timer_fn+0x2d/0x1c0 ... Freed by task 47078: tipc_msg_validate+0x7b/0x440 [tipc] tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] This patch fixes it by re-fetching the skb cb from the new allocated skb after calling tipc_msg_validate().

In the Linux kernel, the following vulnerability has been resolved: net: hsr: Fix potential use-after-free The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout Connecting the same socket twice consecutively in sco_sock_connect() could lead to a race condition where two sco_conn objects are created but only one is associated with the socket. If the socket is closed before the SCO connection is established, the timer associated with the dangling sco_conn object won't be canceled. As the sock object is being freed, the use-after-free problem happens when the timer callback function sco_sock_timeout() accesses the socket. Here's the call trace: dump_stack+0x107/0x163 ? refcount_inc+0x1c/ print_address_description.constprop.0+0x1c/0x47e ? refcount_inc+0x1c/0x7b kasan_report+0x13a/0x173 ? refcount_inc+0x1c/0x7b check_memory_region+0x132/0x139 refcount_inc+0x1c/0x7b sco_sock_timeout+0xb2/0x1ba process_one_work+0x739/0xbd1 ? cancel_delayed_work+0x13f/0x13f ? __raw_spin_lock_init+0xf0/0xf0 ? to_kthread+0x59/0x85 worker_thread+0x593/0x70e kthread+0x346/0x35a ? drain_workqueue+0x31a/0x31a ? kthread_bind+0x4b/0x4b ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix a race in rxrpc_exit_net() Current code can lead to the following race: CPU0 CPU1 rxrpc_exit_net() rxrpc_peer_keepalive_worker() if (rxnet->live) rxnet->live = false; del_timer_sync(&rxnet->peer_keepalive_timer); timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay); cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_exit_net() exits while peer_keepalive_timer is still armed, leading to use-after-free. syzbot report was: ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0 WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0 R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __debug_check_no_obj_freed lib/debugobjects.c:992 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023 kfree+0xd6/0x310 mm/slab.c:3809 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176 ops_free_list net/core/net_namespace.c:174 [inline] cleanup_net+0x591/0xb00 net/core/net_namespace.c:598 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK>

In the Linux kernel, the following vulnerability has been resolved: skbuff: fix coalescing for page_pool fragment recycling Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce().

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix crash when startup fails. If the nic fails to start, it is possible that the reset_work has already been scheduled. Ensure the work item is canceled so we do not have use-after-free crash in case cleanup is called before the work item is executed. This fixes crash on my x86_64 apu2 when mt7921k radio fails to work. Radio still fails, but OS does not crash.

In the Linux kernel, the following vulnerability has been resolved: bfq: Update cgroup information before merging bio When the process is migrated to a different cgroup (or in case of writeback just starts submitting bios associated with a different cgroup) bfq_merge_bio() can operate with stale cgroup information in bic. Thus the bio can be merged to a request from a different cgroup or it can result in merging of bfqqs for different cgroups or bfqqs of already dead cgroups and causing possible use-after-free issues. Fix the problem by updating cgroup information in bfq_merge_bio().

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ==================================================================

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470

In the Linux kernel, the following vulnerability has been resolved: igb: fix a use-after-free issue in igb_clean_tx_ring Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: blk-throttle: Set BIO_THROTTLED when bio has been throttled 1.In current process, all bio will set the BIO_THROTTLED flag after __blk_throtl_bio(). 2.If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.But in the current process, if bio is throttled. The BIO_THROTTLED will be set to bio after timer start. If the bio has been completed, it may cause use-after-free blow. BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70 Read of size 2 at addr ffff88801b8902d4 by task fio/26380 dump_stack+0x9b/0xce print_address_description.constprop.6+0x3e/0x60 kasan_report.cold.9+0x22/0x3a blk_throtl_bio+0x12f0/0x2c70 submit_bio_checks+0x701/0x1550 submit_bio_noacct+0x83/0xc80 submit_bio+0xa7/0x330 mpage_readahead+0x380/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 26380: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.2+0xc1/0xd0 kmem_cache_alloc+0x146/0x440 mempool_alloc+0x125/0x2f0 bio_alloc_bioset+0x353/0x590 mpage_alloc+0x3b/0x240 do_mpage_readpage+0xddf/0x1ef0 mpage_readahead+0x264/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: kasan_save_stack+0x19/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x1b/0x30 __kasan_slab_free+0x111/0x160 kmem_cache_free+0x94/0x460 mempool_free+0xd6/0x320 bio_free+0xe0/0x130 bio_put+0xab/0xe0 bio_endio+0x3a6/0x5d0 blk_update_request+0x590/0x1370 scsi_end_request+0x7d/0x400 scsi_io_completion+0x1aa/0xe50 scsi_softirq_done+0x11b/0x240 blk_mq_complete_request+0xd4/0x120 scsi_mq_done+0xf0/0x200 virtscsi_vq_done+0xbc/0x150 vring_interrupt+0x179/0x390 __handle_irq_event_percpu+0xf7/0x490 handle_irq_event_percpu+0x7b/0x160 handle_irq_event+0xcc/0x170 handle_edge_irq+0x215/0xb20 common_interrupt+0x60/0x120 asm_common_interrupt+0x1e/0x40 Fix this by move BIO_THROTTLED set into the queue_lock.

In the Linux kernel, the following vulnerability has been resolved: srcu: Tighten cleanup_srcu_struct() GP checks Currently, cleanup_srcu_struct() checks for a grace period in progress, but it does not check for a grace period that has not yet started but which might start at any time. Such a situation could result in a use-after-free bug, so this commit adds a check for a grace period that is needed but not yet started to cleanup_srcu_struct().

In the Linux kernel, the following vulnerability has been resolved: blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx blk_mq_run_hw_queues() could be run when there isn't queued request and after queue is cleaned up, at that time tagset is freed, because tagset lifetime is covered by driver, and often freed after blk_cleanup_queue() returns. So don't touch ->tagset for figuring out current default hctx by the mapping built in request queue, so use-after-free on tagset can be avoided. Meantime this way should be fast than retrieving mapping from tagset.

In the Linux kernel, the following vulnerability has been resolved: driver: base: fix UAF when driver_attach failed When driver_attach(drv); failed, the driver_private will be freed. But it has been added to the bus, which caused a UAF. To fix it, we need to delete it from the bus when failed.

In the Linux kernel, the following vulnerability has been resolved: bfq: Avoid merging queues with different parents It can happen that the parent of a bfqq changes between the moment we decide two queues are worth to merge (and set bic->stable_merge_bfqq) and the moment bfq_setup_merge() is called. This can happen e.g. because the process submitted IO for a different cgroup and thus bfqq got reparented. It can even happen that the bfqq we are merging with has parent cgroup that is already offline and going to be destroyed in which case the merge can lead to use-after-free issues such as: BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50 Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544 CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x46/0x5a print_address_description.constprop.0+0x1f/0x140 ? __bfq_deactivate_entity+0x9cb/0xa50 kasan_report.cold+0x7f/0x11b ? __bfq_deactivate_entity+0x9cb/0xa50 __bfq_deactivate_entity+0x9cb/0xa50 ? update_curr+0x32f/0x5d0 bfq_deactivate_entity+0xa0/0x1d0 bfq_del_bfqq_busy+0x28a/0x420 ? resched_curr+0x116/0x1d0 ? bfq_requeue_bfqq+0x70/0x70 ? check_preempt_wakeup+0x52b/0xbc0 __bfq_bfqq_expire+0x1a2/0x270 bfq_bfqq_expire+0xd16/0x2160 ? try_to_wake_up+0x4ee/0x1260 ? bfq_end_wr_async_queues+0xe0/0xe0 ? _raw_write_unlock_bh+0x60/0x60 ? _raw_spin_lock_irq+0x81/0xe0 bfq_idle_slice_timer+0x109/0x280 ? bfq_dispatch_request+0x4870/0x4870 __hrtimer_run_queues+0x37d/0x700 ? enqueue_hrtimer+0x1b0/0x1b0 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_update_offsets_now+0x6f/0x280 hrtimer_interrupt+0x2c8/0x740 Fix the problem by checking that the parent of the two bfqqs we are merging in bfq_setup_merge() is the same.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix use-after-free for dynamic ftrace_ops KASAN reported a use-after-free with ftrace ops [1]. It was found from vmcore that perf had registered two ops with the same content successively, both dynamic. After unregistering the second ops, a use-after-free occurred. In ftrace_shutdown(), when the second ops is unregistered, the FTRACE_UPDATE_CALLS command is not set because there is another enabled ops with the same content. Also, both ops are dynamic and the ftrace callback function is ftrace_ops_list_func, so the FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value of 'command' will be 0 and ftrace_shutdown() will skip the rcu synchronization. However, ftrace may be activated. When the ops is released, another CPU may be accessing the ops. Add the missing synchronization to fix this problem. [1] BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468 CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132 show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b4/0x248 lib/dump_stack.c:118 print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387 __kasan_report mm/kasan/report.c:547 [inline] kasan_report+0x118/0x210 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load8+0x98/0xc0 mm/kasan/generic.c:253 __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 ftrace_graph_call+0x0/0x4 __might_sleep+0x8/0x100 include/linux/perf_event.h:1170 __might_fault mm/memory.c:5183 [inline] __might_fault+0x58/0x70 mm/memory.c:5171 do_strncpy_from_user lib/strncpy_from_user.c:41 [inline] strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139 getname_flags+0xb0/0x31c fs/namei.c:149 getname+0x2c/0x40 fs/namei.c:209 [...] Allocated by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:479 [inline] __kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493 kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:675 [inline] perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 __arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723 [...] Freed by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track+0x24/0x34 mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358 __kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437 __kasan_slab_free mm/kasan/common.c:445 [inline] kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446 slab_free_hook mm/slub.c:1569 [inline] slab_free_freelist_hook mm/slub.c:1608 [inline] slab_free mm/slub.c:3179 [inline] kfree+0x12c/0xc10 mm/slub.c:4176 perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 [...]