An issue was found in Linux kernel before 5.5.4. The mwifiex_cmd_append_vsie_tlv() function in drivers/net/wireless/marvell/mwifiex/scan.c allows local users to gain privileges or cause a denial of service because of an incorrect memcpy and buffer overflow, aka CID-b70261a288ea.

In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xsk: fix OOB map writes when deleting elements Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] <TASK> [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default.

In the Linux kernel, the following vulnerability has been resolved: ice: copy last block omitted in ice_get_module_eeprom() ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ ....

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter).

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix disable_managed_interrupts Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled. When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior. Stack Trace: [ 7.860089] scsi host2: smartpqi [ 7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0 [ 7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1 [ 7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022 [ 7.963026] Workqueue: events work_for_cpu_fn [ 7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0 [ 7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 [ 7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216 [ 7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010 [ 7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310 [ 7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00 [ 7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000 [ 7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8 [ 7.978290] FS: 0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000 [ 7.978292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0 [ 8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.172818] PKRU: 55555554 [ 8.172819] Call Trace: [ 8.172823] blk_mq_alloc_tag_set+0x12e/0x310 [ 8.264339] scsi_add_host_with_dma.cold.9+0x30/0x245 [ 8.279302] pqi_ctrl_init+0xacf/0xc8e [smartpqi] [ 8.294085] ? pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.309015] pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.323286] local_pci_probe+0x42/0x80 [ 8.337855] work_for_cpu_fn+0x16/0x20 [ 8.351193] process_one_work+0x1a7/0x360 [ 8.364462] ? create_worker+0x1a0/0x1a0 [ 8.379252] worker_thread+0x1ce/0x390 [ 8.392623] ? create_worker+0x1a0/0x1a0 [ 8.406295] kthread+0x10a/0x120 [ 8.418428] ? set_kthread_struct+0x50/0x50 [ 8.431532] ret_from_fork+0x1f/0x40 [ 8.444137] ---[ end trace 1bf0173d39354506 ]---

In the Linux kernel before 4.20.12, net/ipv4/netfilter/nf_nat_snmp_basic_main.c in the SNMP NAT module has insufficient ASN.1 length checks (aka an array index error), making out-of-bounds read and write operations possible, leading to an OOPS or local privilege escalation. This affects snmp_version and snmp_helper.

A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.

objstack in GNU Aspell 0.60.8 has a heap-based buffer overflow in acommon::ObjStack::dup_top (called from acommon::StringMap::add and acommon::Config::lookup_list).

In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability.

A vulnerability was found in Linux Kernel, where a Heap Overflow was found in mwifiex_set_wmm_params() function of Marvell Wifi Driver.

There is heap-based buffer overflow in kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code.

Integer truncation in EDK II may allow an authenticated user to potentially enable escalation of privilege via local access.

There is heap-based buffer overflow in Linux kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: update channel list in reg notifier instead reg worker Currently when ath11k gets a new channel list, it will be processed according to the following steps: 1. update new channel list to cfg80211 and queue reg_work. 2. cfg80211 handles new channel list during reg_work. 3. update cfg80211's handled channel list to firmware by ath11k_reg_update_chan_list(). But ath11k will immediately execute step 3 after reg_work is just queued. Since step 2 is asynchronous, cfg80211 may not have completed handling the new channel list, which may leading to an out-of-bounds write error: BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list Call Trace: ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k] kfree+0x109/0x3a0 ath11k_regd_update+0x1cf/0x350 [ath11k] ath11k_regd_update_work+0x14/0x20 [ath11k] process_one_work+0xe35/0x14c0 Should ensure step 2 is completely done before executing step 3. Thus Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set, cfg80211 will notify ath11k after step 2 is done. So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will notify ath11k after step 2 is done. At this time, there will be no KASAN bug during the execution of the step 3. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs().

An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system.

A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation. A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group(). We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.

It was discovered that the eBPF implementation in the Linux kernel did not properly track bounds information for 32 bit registers when performing div and mod operations. A local attacker could use this to possibly execute arbitrary code.

In the Linux kernel, the following vulnerability has been resolved: vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa max vqp attr to avoid such bugs.

NVIDIA GPU driver for Windows and Linux contains a vulnerability where a user can cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering.

kernel/bpf/verifier.c in the Linux kernel through 5.12.7 enforces incorrect limits for pointer arithmetic operations, aka CID-bb01a1bba579. This can be abused to perform out-of-bounds reads and writes in kernel memory, leading to local privilege escalation to root. In particular, there is a corner case where the off reg causes a masking direction change, which then results in an incorrect final aux->alu_limit.

A heap out-of-bounds write vulnerability in the Linux kernel's Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation. If perf_read_group() is called while an event's sibling_list is smaller than its child's sibling_list, it can increment or write to memory locations outside of the allocated buffer. We recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: possible buffer overflow Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access.

In the Linux kernel, the following vulnerability has been resolved: locking/ww_mutex/test: Fix potential workqueue corruption In some cases running with the test-ww_mutex code, I was seeing odd behavior where sometimes it seemed flush_workqueue was returning before all the work threads were finished. Often this would cause strange crashes as the mutexes would be freed while they were being used. Looking at the code, there is a lifetime problem as the controlling thread that spawns the work allocates the "struct stress" structures that are passed to the workqueue threads. Then when the workqueue threads are finished, they free the stress struct that was passed to them. Unfortunately the workqueue work_struct node is in the stress struct. Which means the work_struct is freed before the work thread returns and while flush_workqueue is waiting. It seems like a better idea to have the controlling thread both allocate and free the stress structures, so that we can be sure we don't corrupt the workqueue by freeing the structure prematurely. So this patch reworks the test to do so, and with this change I no longer see the early flush_workqueue returns.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL OPDESC() simply indexes into nfsd4_ops[] by the op's operation number, without range checking that value. It assumes callers are careful to avoid calling it with an out-of-bounds opnum value. nfsd4_decode_compound() is not so careful, and can invoke OPDESC() with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end of nfsd4_ops[].

In the Linux kernel, the following vulnerability has been resolved: iomap: Fix possible overflow condition in iomap_write_delalloc_scan folio_next_index() returns an unsigned long value which left shifted by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead use folio_pos(folio) + folio_size(folio), which does this correctly.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show() The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries.

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

A out-of-bounds write flaw was found in the xorg-x11-server. This issue occurs due to an incorrect calculation of a buffer offset when copying data stored in the heap in the XIChangeDeviceProperty function in Xi/xiproperty.c and in RRChangeOutputProperty function in randr/rrproperty.c, allowing for possible escalation of privileges or denial of service.

In the Linux kernel, the following vulnerability has been resolved: media: gspca: cpia1: shift-out-of-bounds in set_flicker Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mvpp2_main: fix possible OOB write in mvpp2_ethtool_get_rxnfc() rules is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rules to avoid OOB writing or NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: media: aspeed: Fix memory overwrite if timing is 1600x900 When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on OpenBMC's web The size of macro block captured is 8x8. Therefore, we should make sure the height of src-buf is 8 aligned to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext() The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after failed write When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: wmi: Fix opening of char device Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device using container_of(). This also avoids wmi_char_open() picking a wrong WMI device bound to a driver with the same name as the original driver.

In the Linux kernel, the following vulnerability has been resolved: macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix a potential overflow in sctp_ifwdtsn_skip Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only checks the pos against the end of the chunk. However, the data left for the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference it as struct sctp_ifwdtsn_skip may cause coverflow. This patch fixes it by checking the pos against "the end of the chunk - sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to sctp_fwdtsn_skip.

In the Linux kernel, the following vulnerability has been resolved: block: ublk: extending queue_size to fix overflow When validating drafted SPDK ublk target, in a case that assigning large queue depth to multiqueue ublk device, ublk target would run into a weird incorrect state. During rounds of review and debug, An overflow bug was found in ublk driver. In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means each ublk queue depth can be set as large as 4096. But when setting qd for a ublk device, sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io) will be larger than 65535 if qd is larger than 2728. Then queue_size is overflowed, and ublk_get_queue() references a wrong pointer position. The wrong content of ublk_queue elements will lead to out-of-bounds memory access. Extend queue_size in ublk_device as "unsigned int".

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.

In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Set new vector length before reallocating As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler We do check for target CPU == -1, but this might change at the time we are going to use it. Hold the physical target CPU in a local variable to avoid out-of-bound accesses to the cpu arrays.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---