In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access. The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency. Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.

In the Linux kernel, the following vulnerability has been resolved: dm: clear cloned request bio pointer when last clone bio completes Stale rq->bio values have been observed to cause double-initialization of cloned bios in request-based device-mapper targets, leading to use-after-free and double-free scenarios. One such case occurs when using dm-multipath on top of a PCIe NVMe namespace, where cloned request bios are freed during blk_complete_request(), but rq->bio is left intact. Subsequent clone teardown then attempts to free the same bios again via blk_rq_unprep_clone(). The resulting double-free path looks like: nvme_pci_complete_batch() nvme_complete_batch() blk_mq_end_request_batch() blk_complete_request() // called on a DM clone request bio_endio() // first free of all clone bios ... rq->end_io() // end_clone_request() dm_complete_request(tio->orig) dm_softirq_done() dm_done() dm_end_request() blk_rq_unprep_clone() // second free of clone bios Fix this by clearing the clone request's bio pointer when the last cloned bio completes, ensuring that later teardown paths do not attempt to free already-released bios.

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation The variable valuesize is declared as u8 but accumulates the total length of all SSIDs to scan. Each SSID contributes up to 33 bytes (IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10) SSIDs the total can reach 330, which wraps around to 74 when stored in a u8. This causes kmalloc to allocate only 75 bytes while the subsequent memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte heap buffer overflow. Widen valuesize from u8 to u32 to accommodate the full range.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores the pointer in pipe_buffer.private. The pipe_buf_operations for these buffers used .get = generic_pipe_buf_get, which only increments the page reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv pointer itself was not handled, so after tee() both the original and the cloned pipe_buffer share the same smc_spd_priv *. When both pipes are subsequently released, smc_rx_pipe_buf_release() is called twice against the same object: 1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct] 2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF] KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which then escalates to a NULL-pointer dereference and kernel panic via smc_rx_update_consumer() when it chases the freed priv->smc pointer: BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0 Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x650 kasan_report+0xc6/0x100 smc_rx_pipe_buf_release+0x78/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:smc_rx_update_consumer+0x8d/0x350 Call Trace: <TASK> smc_rx_pipe_buf_release+0x121/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Kernel panic - not syncing: Fatal exception Beyond the memory-safety problem, duplicating an SMC splice buffer is semantically questionable: smc_rx_update_cons() would advance the consumer cursor twice for the same data, corrupting receive-window accounting. A refcount on smc_spd_priv could fix the double-free, but the cursor-accounting issue would still need to be addressed separately. The .get callback is invoked by both tee(2) and splice_pipe_to_pipe() for partial transfers; both will now return -EFAULT. Users who need to duplicate SMC socket data must use a copy-based read path.

In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix WRITE_SAME No Data Buffer crash In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like "sg_write_same --ndob" we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer.

In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix double free of WoL irq We do not need to free wol_irq since it was instantiated with devm_request_irq(). So devres will free for us.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the source operand is a constant. When dst has signed range [-1, 0], it forks the verifier state: the pushed path gets dst = 0, the current path gets dst = -1. For BPF_AND this is correct: 0 & K == 0. For BPF_OR this is wrong: 0 | K == K, not 0. The pushed path therefore tracks dst as 0 when the runtime value is K, producing an exploitable verifier/runtime divergence that allows out-of-bounds map access. Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to push_stack(), so the pushed path re-executes the ALU instruction with dst = 0 and naturally computes the correct result for any opcode.

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix incorrect pte restoration for lazyfree folios We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the batch has a mix of writable and non-writable bits, we may end up setting the entire batch writable. Fix this by respecting writable bit during batching. Although on a successful unmap of a lazyfree folio, the soft-dirty bit is lost, preserve it on pte restoration by respecting the bit during batching, to make the fix consistent w.r.t both writable bit and soft-dirty bit. I was able to write the below reproducer and crash the kernel. Explanation of reproducer (set 64K mTHP to always): Fault in a 64K large folio. Split the VMA at mid-point with MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do MADV_FREE on the range to mark the folio as lazyfree. Write to the memory to dirty the pte, eventually rmap will dirty the folio. Then trigger reclaim, we will hit the pte restoration path, and the kernel will crash with the trace given below. The BUG happens at: BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw); The code path is asking for anonymous page to be mapped writable into the pagetable. The BUG_ON() firing implies that such a writable page has been mapped into the pagetables of more than one process, which breaks anonymous memory/CoW semantics. [ 21.134473] kernel BUG at mm/page_table_check.c:118! [ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 21.135917] Modules linked in: [ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT [ 21.136858] Hardware name: linux,dummy-virt (DT) [ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 21.137308] pc : page_table_check_set+0x28c/0x2a8 [ 21.137607] lr : page_table_check_set+0x134/0x2a8 [ 21.137885] sp : ffff80008a3b3340 [ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000 [ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001 [ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30 [ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000 [ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff [ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020 [ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0 [ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff [ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002 [ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0 [ 21.141991] Call trace: [ 21.142093] page_table_check_set+0x28c/0x2a8 (P) [ 21.142265] __page_table_check_ptes_set+0x144/0x1e8 [ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8 [ 21.142766] contpte_set_ptes+0xe8/0x140 [ 21.142907] try_to_unmap_one+0x10c4/0x10d0 [ 21.143177] rmap_walk_anon+0x100/0x250 [ 21.143315] try_to_unmap+0xa0/0xc8 [ 21.143441] shrink_folio_list+0x59c/0x18a8 [ 21.143759] shrink_lruvec+0x664/0xbf0 [ 21.144043] shrink_node+0x218/0x878 [ 21.144285] __node_reclaim.constprop.0+0x98/0x338 [ 21.144763] user_proactive_reclaim+0x2a4/0x340 [ 21.145056] reclaim_store+0x3c/0x60 [ 21.145216] dev_attr_store+0x20/0x40 [ 21.145585] sysfs_kf_write+0x84/0xa8 [ 21.145835] kernfs_fop_write_iter+0x130/0x1c8 [ 21.145994] vfs_write+0x2b8/0x368 [ 21.146119] ksys_write+0x70/0x110 [ 21.146240] __arm64_sys_write+0x24/0x38 [ 21.146380] invoke_syscall+0x50/0x120 [ 21.146513] el0_svc_common.constprop.0+0x48/0xf8 [ 21.146679] do_el0_svc+0x28/0x40 [ 21.146798] el0_svc+0x34/0x110 [ 21.146926] el0t ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)

The futex_requeue function in kernel/futex.c in the Linux kernel through 3.14.5 does not ensure that calls have two different futex addresses, which allows local users to gain privileges via a crafted FUTEX_REQUEUE command that facilitates unsafe waiter modification.

In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel

In the Linux kernel, the following vulnerability has been resolved: spi: meson-spicc: Fix double-put in remove path meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory.

In the Linux kernel, the following vulnerability has been resolved: xfs: avoid dereferencing log items after push callbacks After xfsaild_push_item() calls iop_push(), the log item may have been freed if the AIL lock was dropped during the push. Background inode reclaim or the dquot shrinker can free the log item while the AIL lock is not held, and the tracepoints in the switch statement dereference the log item after iop_push() returns. Fix this by capturing the log item type, flags, and LSN before calling xfsaild_push_item(), and introducing a new xfs_ail_push_class trace event class that takes these pre-captured values and the ailp pointer instead of the log item pointer.

In the Linux kernel, the following vulnerability has been resolved: isdn: cpai: check ctr->cnr to avoid array index out of bound The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479]

A heap-based buffer overflow was found in the __vsyslog_internal function of the glibc library. This function is called by the syslog and vsyslog functions. This issue occurs when the openlog function was not called, or called with the ident argument set to NULL, and the program name (the basename of argv[0]) is bigger than 1024 bytes, resulting in an application crash or local privilege escalation. This issue affects glibc 2.36 and newer.

A use after free in the Linux kernel File System notify functionality was found in the way user triggers copy_info_records_to_user() call to fail in copy_event_to_user(). A local user could use this flaw to crash the system or potentially escalate their privileges on the system.

A use-after-free flaw was found in the Linux kernel’s FUSE filesystem in the way a user triggers write(). This flaw allows a local user to gain unauthorized access to data from the FUSE filesystem, resulting in privilege escalation.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free. We recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.

A use-after-free flaw was found in the Linux kernel’s io_uring subsystem in the way a user sets up a ring with IORING_SETUP_IOPOLL with more than one task completing submissions on this ring. This flaw allows a local user to crash or escalate their privileges on the system.

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. In versions prior to 1.10.4 and 1.12.0, Flatpak apps with direct access to AF_UNIX sockets such as those used by Wayland, Pipewire or pipewire-pulse can trick portals and other host-OS services into treating the Flatpak app as though it was an ordinary, non-sandboxed host-OS process. They can do this by manipulating the VFS using recent mount-related syscalls that are not blocked by Flatpak's denylist seccomp filter, in order to substitute a crafted `/.flatpak-info` or make that file disappear entirely. Flatpak apps that act as clients for AF_UNIX sockets such as those used by Wayland, Pipewire or pipewire-pulse can escalate the privileges that the corresponding services will believe the Flatpak app has. Note that protocols that operate entirely over the D-Bus session bus (user bus), system bus or accessibility bus are not affected by this. This is due to the use of a proxy process `xdg-dbus-proxy`, whose VFS cannot be manipulated by the Flatpak app, when interacting with these buses. Patches exist for versions 1.10.4 and 1.12.0, and as of time of publication, a patch for version 1.8.2 is being planned. There are no workarounds aside from upgrading to a patched version.

Integer Overflow or Wraparound vulnerability in io_uring of Linux Kernel allows local attacker to cause memory corruption and escalate privileges to root. This issue affects: Linux Kernel versions prior to 5.4.189; version 5.4.24 and later versions.

A use-after-free flaw was found in the Linux kernel’s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.

An integer overflow flaw was found in the Linux kernel’s virtio device driver code in the way a user triggers the vhost_vdpa_config_validate function. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in shinker's callback The mmap read lock is used during the shrinker's callback, which means that using alloc->vma pointer isn't safe as it can race with munmap(). As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker's debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway.

In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

The root cause of this vulnerability is that the ioctl$DRM_IOCTL_MODE_DESTROY_DUMB can decrease refcount of *drm_vgem_gem_object *(created in *vgem_gem_dumb_create*) concurrently, and *vgem_gem_dumb_create *will access the freed drm_vgem_gem_object.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The function nft_trans_gc_catchall did not remove the catchall set element from the catchall_list when the argument sync is true, making it possible to free a catchall set element many times. We recommend upgrading past commit 93995bf4af2c5a99e2a87f0cd5ce547d31eb7630.

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup.

A flaw out of bounds memory write in the Linux kernel UDF file system functionality was found in the way user triggers some file operation which triggers udf_write_fi(). A local user could use this flaw to crash the system or potentially

In the Linux kernel, the following vulnerability has been resolved: NFSD: Defer sub-object cleanup in export put callbacks svc_export_put() calls path_put() and auth_domain_put() immediately when the last reference drops, before the RCU grace period. RCU readers in e_show() and c_show() access both ex_path (via seq_path/d_path) and ex_client->name (via seq_escape) without holding a reference. If cache_clean removes the entry and drops the last reference concurrently, the sub-objects are freed while still in use, producing a NULL pointer dereference in d_path. Commit 2530766492ec ("nfsd: fix UAF when access ex_uuid or ex_stats") moved kfree of ex_uuid and ex_stats into the call_rcu callback, but left path_put() and auth_domain_put() running before the grace period because both may sleep and call_rcu callbacks execute in softirq context. Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers the callback until after the RCU grace period and executes it in process context where sleeping is permitted. This allows path_put() and auth_domain_put() to be moved into the deferred callback alongside the other resource releases. Apply the same fix to expkey_put(), which has the identical pattern with ek_path and ek_client. A dedicated workqueue scopes the shutdown drain to only NFSD export release work items; flushing the shared system_unbound_wq would stall on unrelated work from other subsystems. nfsd_export_shutdown() uses rcu_barrier() followed by flush_workqueue() to ensure all deferred release callbacks complete before the export caches are destroyed. Reviwed-by: Jeff Layton <jlayton@kernel.org>

Out-of-bounds Write in GitHub repository vim/vim prior to 8.2.4977.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Fix double free in dma-buf feature The error path through vfio_pci_core_feature_dma_buf() ignores its own advice to only use dma_buf_put() after dma_buf_export(), instead falling through the entire unwind chain. In the unlikely event that we encounter file descriptor exhaustion, this can result in an unbalanced refcount on the vfio device and double free of allocated objects. Avoid this by moving the "put" directly into the error path and return the errno rather than entering the unwind chain.

An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system.

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Revert to operating out-of-place This mostly reverts commit 72548b093ee3 except for the copying of the associated data. There is no benefit in operating in-place in algif_aead since the source and destination come from different mappings. Get rid of all the complexity added for in-place operation and just copy the AD directly.

In the Linux kernel, the following vulnerability has been resolved: team: fix header_ops type confusion with non-Ethernet ports Similar to commit 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()") team has the same class of header_ops type confusion. For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops directly. When the team device later calls dev_hard_header() or dev_parse_header(), these callbacks can run with the team net_device instead of the real lower device, so netdev_priv(dev) is interpreted as the wrong private type and can crash. The syzbot report shows a crash in bond_header_create(), but the root cause is in team: the topology is gre -> bond -> team, and team calls the inherited header_ops with its own net_device instead of the lower device, so bond_header_create() receives a team device and interprets netdev_priv() as bonding private data, causing a type confusion crash. Fix this by introducing team header_ops wrappers for create/parse, selecting a team port under RCU, and calling the lower device callbacks with port->dev, so each callback always sees the correct net_device context. Also pass the selected lower device to the lower parse callback, so recursion is bounded in stacked non-Ethernet topologies and parse callbacks always run with the correct device context.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in print_graph_function_flags during tracer switching Kairui reported a UAF issue in print_graph_function_flags() during ftrace stress testing [1]. This issue can be reproduced if puting a 'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(), and executing the following script: $ echo function_graph > current_tracer $ cat trace > /dev/null & $ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point $ echo timerlat > current_tracer The root cause lies in the two calls to print_graph_function_flags within print_trace_line during each s_show(): * One through 'iter->trace->print_line()'; * Another through 'event->funcs->trace()', which is hidden in print_trace_fmt() before print_trace_line returns. Tracer switching only updates the former, while the latter continues to use the print_line function of the old tracer, which in the script above is print_graph_function_flags. Moreover, when switching from the 'function_graph' tracer to the 'timerlat' tracer, s_start only calls graph_trace_close of the 'function_graph' tracer to free 'iter->private', but does not set it to NULL. This provides an opportunity for 'event->funcs->trace()' to use an invalid 'iter->private'. To fix this issue, set 'iter->private' to NULL immediately after freeing it in graph_trace_close(), ensuring that an invalid pointer is not passed to other tracers. Additionally, clean up the unnecessary 'iter->private = NULL' during each 'cat trace' when using wakeup and irqsoff tracers. [1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/