A command injection vulnerability exists in D-Link DAP-1650 devices when handling UPnP SUBSCRIBE messages. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

There is a command injection vulnerability in the ssdpcgi_main function of cgibin binary in D-Link DIR-815 router firmware v1.04.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been classified as critical. This affects the function webdav_mgr of the file /cgi-bin/webdav_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_path leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 & GO-RT-AC750_revB_FWv200b02 is vulnerable to command injection via /htdocs/upnpinc/gena.php.

D-link DIR-816 A2_v1.10CNB04.img is vulnerable to Command injection via /goform/NTPSyncWithHost.

DLINK - DSL-224 Post-auth RCE. DLINK router version 3.0.8 has an interface where you can configure NTP servers (Network Time Protocol) via jsonrpc API. It is possible to inject a command through this interface that will run with ROOT permissions on the router.

D-Link DIR810LA1_FW102B22 was discovered to contain a command injection vulnerability via the Ping_addr function.

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in jhttpd msp_info_htm function.

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in the jhttpd upgrade_filter_asp function.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

D-Link DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution due to insufficient parameter filtering in the CGI handling function of upgrade_filter.asp.

D-Link DI-7003G v19.12.24A1, DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution (RCE) via version_upgrade.asp.

The EFM ipTIME C200 IP Camera is affected by a Command Injection vulnerability in /login.cgi?logout=1 script. To exploit this vulnerability, an attacker can send a GET request that executes arbitrary OS commands via cookie value.

A vulnerability, which was classified as critical, was found in IonicaBizau node-gry up to 5.x. This affects an unknown part. The manipulation leads to command injection. Upgrading to version 6.0.0 is able to address this issue. The patch is named 5108446c1e23960d65e8b973f1d9486f9f9dbd6c. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-218019.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.100 and R6230 before 1.1.0.100.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

ELECOM wireless LAN routers WRC-1167GHBK-S v1.03 and earlier, and WRC-1167GEBK-S v1.03 and earlier allow a network-adjacent authenticated attacker to execute an arbitrary command by sending a specially crafted request to the web management page.

Command injection vulnerability in ELECOM and LOGITEC wireless LAN routers allows a network-adjacent authenticated attacker to execute an arbitrary command by sending a specially crafted request to the web management page. Affected products and versions are as follows: WRC-1167GHBK3-A v1.24 and earlier, WRC-1167FEBK-A v1.18 and earlier, WRC-F1167ACF2 all versions, WRC-600GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, and LAN-W301NR all versions.

Command Injection vulnerability in goform/SetIPTVCfg interface of Tenda AC15 V15.03.05.20 allows remote attackers to run arbitrary commands via crafted POST request.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

NETGEAR R7800 devices before 1.0.2.62 are affected by command injection by an authenticated user.

A vulnerability, which was classified as critical, has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014. Affected by this issue is the function FCGI_WizardProtoProcess of the file /api/wizard/getSpecs of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

The 7520V3V1.0.0B09P27 version, and all earlier versions of ZTE product ZX297520V3 are impacted by a Command Injection vulnerability. Unauthorized users can exploit this vulnerability to control the user terminal system.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been classified as critical. Affected is the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/setLanguage of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be approached within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

A vulnerability, which was classified as critical, was found in H3C Magic NX15, Magic NX400 and Magic R3010 up to V100R014. This affects the function FCGI_WizardProtoProcess of the file /api/wizard/getsyncpppoecfg of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

A vulnerability classified as critical has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected is the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getBasicInfo of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7800 before 1.0.2.60 and XR500 before 2.3.2.32.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014 and classified as critical. This issue affects the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getCapabilityWeb of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7800 before 1.0.2.60 and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7000v2 before 1.0.0.53, R6220 before 1.1.0.80, R6260 before 1.1.0.64, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.60, R7000P before 1.3.1.64, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.46, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

A vulnerability classified as critical was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014. Affected by this vulnerability is the function FCGI_WizardProtoProcess of the file /api/wizard/getCapability of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014 and classified as critical. This vulnerability affects the function FCGI_WizardProtoProcess of the file /api/wizard/setsyncpppoecfg of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been declared as critical. Affected by this vulnerability is the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getLanguage of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

Corega CG-WLBARGL devices allow remote authenticated users to execute arbitrary commands via unspecified vectors.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/wizard/getWifiNeighbour of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /api/wizard/getDualbandSync of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, was found in H3C Magic NX30 Pro up to V100R007. This affects an unknown part of the file /api/wizard/getNetworkStatus of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

AX3000 Dual-Band Gigabit Wi-Fi 6 Router AX9 V22.03.01.46 and AX3000 Dual-Band Gigabit Wi-Fi 6 Router AX12 V1.0 V22.03.01.46 were discovered to contain an authenticated remote command execution (RCE) vulnerability via the macFilterType parameter at /goform/setMacFilterCfg.

A vulnerability, which was classified as critical, has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected by this issue is some unknown functionality of the file /api/esps of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.