NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In NanoMQ version 0.24.6, after enabling auth.http_auth (HTTP authentication), when a client connects to the broker using MQTT CONNECT without providing username/password, and the configuration params uses the placeholders %u / %P (e.g., username="%u", password="%P"), the HTTP request construction phase enters auth_http.c:set_data(). This results in calling strlen() on a NULL pointer, causing a SIGSEGV crash. This crash can be triggered remotely, resulting in a denial of service. This issue has been patched in version 0.24.7.

In NanoMQ v0.15.0-0, segment fault with Null Pointer Dereference occurs in the process of decoding subinfo_decode and unsubinfo_decode.

EMQ X Broker versions prior to 4.2.8 are vulnerable to a denial of service attack as a result of excessive memory consumption due to the handling of untrusted inputs. These inputs cause the message broker to consume large amounts of memory, resulting in the application being terminated by the operating system.

A segmentation fault in NanoMQ v0.21.10 allows attackers to cause a Denial of Service (DoS) via crafted messages.

NanoMQ 0.16.5 is vulnerable to heap-use-after-free in the nano_ctx_send function of nmq_mqtt.c.

A use-after-free vulnerability exists in NanoMQ 0.17.2. The vulnerability can be triggered by calling the function nni_mqtt_msg_get_publish_property() in the file mqtt_msg.c. This vulnerability is caused by improper data tracing, and an attacker could exploit it to cause a denial of service attack.

A heap buffer overflow vulnerability exists in NanoMQ 0.17.2. The vulnerability can be triggered by calling the function nmq_subinfo_decode() in the file mqtt_parser.c. An attacker could exploit this vulnerability to cause a denial of service attack.

NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Versions prior to 0.24.11 have a remotely triggerable heap buffer overflow in the `uri_param_parse` function of NanoMQ's REST API. The vulnerability occurs due to an off-by-one error when allocating memory for query parameter keys and values, allowing an attacker to write a null byte beyond the allocated buffer. This can be triggered via a crafted HTTP request. Version 0.24.11 patches the issue.

NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.24.8, NanoMQ’s MQTT-over-WebSocket transport can be crashed by sending an MQTT packet with a deliberately large Remaining Length in the fixed header while providing a much shorter actual payload. The code path copies Remaining Length bytes without verifying that the current receive buffer contains that many bytes, resulting in an out-of-bounds read (ASAN reports OOB / crash). This is remotely triggerable over the WebSocket listener. This issue has been patched in version 0.24.8.

NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. MQTT v5 Variable Byte Integer parsing out-of-bounds: get_var_integer() accepts 5-byte varints without bounds checks; reliably triggers OOB read / crash when built with ASan. This affects 0.24.6 and earlier.

In NanoMQ v0.15.0-0, a Heap overflow occurs in copyn_utf8_str function of mqtt_parser.c

NanoMQ v0.22.7 is vulnerable to Denial of Service (DoS) due to improper resource throttling. A crafted sequence of requests causes the recv-q queue to saturate, leading to the rapid exhaustion of system file descriptors (FDs). This exhaustion triggers a process crash, rendering the broker unable to provide services.

An invalid read size in Nanomq v0.21.9 allows attackers to cause a Denial of Service (DoS).

NanoMQ v0.17.9 was discovered to contain a heap use-after-free vulnerability via the component sub_Ctx_handle. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted SUBSCRIBE message.

NanoMQ 0.17.5 was discovered to contain a segmentation fault via the component /nanomq/pub_handler.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted PUBLISH message.

A heap buffer overflow vulnerability exists in NanoMQ 0.17.2. The vulnerability can be triggered by calling the function copyn_str() in the file mqtt_parser.c. An attacker could exploit this vulnerability to cause a denial of service attack.

A heap buffer overflow vulnerability exists in NanoMQ 0.17.2. The vulnerability can be triggered by calling the function nni_msg_get_pub_pid() in the file message.c. An attacker could exploit this vulnerability to cause a denial of service attack.

In NanoMQ v0.15.0-0, Heap overflow occurs in read_byte function of mqtt_code.c.

NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In version 0.24.6, NanoMQ has a protocol parsing / forwarding inconsistency when handling shared subscriptions ($share/). A malformed SUBSCRIBE topic such as $share/ab (missing the second /) is not strictly validated during the subscription stage, so the invalid Topic Filter is stored into the subscription table. Later, when any PUBLISH matches this subscription, the broker send path (nmq_pipe_send_start_v4/v5) performs a second $share/ parsing using strchr() and increments the returned pointer without NULL checks. If the second strchr() returns NULL, sub_topic++ turns the pointer into an invalid address (e.g. 0x1). This invalid pointer is then passed into topic_filtern(), which triggers strlen() and crashes with SIGSEGV. The crash is stable and remotely triggerable. This issue has been patched in version 0.24.7.

The TRENDnet TI-PG1284i switch(hw v2.0R) prior to version 2.0.2.S0 suffers from a null pointer dereference vulnerability. This vulnerability exists in its lldp related component. Due to fail to check if ChassisID TLV is contained in the packet, by sending a crafted lldp packet to the device, an attacker can crash the process due to null pointer dereference.

Internet Key Exchange (IKE) Protocol Denial of Service Vulnerability

Windows iSCSI Discovery Service Denial of Service Vulnerability

sshd in OpenSSH before 7.4 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence NEWKEYS message, as demonstrated by Honggfuzz, related to kex.c and packet.c.

A Null pointer dereference in usr/sbin/httpd in ASUS AC68U 3.0.0.4.384.82230 allows remote attackers to trigger DoS via network packet.

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) (AP + CP MDM9x35, or Qualcomm Onechip) software. There is a NULL pointer dereference issue in the IPC socket code. The Samsung ID is SVE-2016-5980 (July 2016).

SkyStream EMR5000 1.16 through 1.18 does not drop packets or disable the Ethernet interface when the buffers are full, which allows remote attackers to cause a denial of service (null pointer exception and kernel panic) via a large number of packets.

In ss_SendCallBarringPwdRequiredIndMsg of ss_CallBarring.c, there is a possible null pointer deref due to a missing null check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

The resolver in nginx before 1.8.1 and 1.9.x before 1.9.10 allows remote attackers to cause a denial of service (invalid pointer dereference and worker process crash) via a crafted UDP DNS response.

A denial-of-service vulnerability exists in the omec-project UPF (component upf-epc/pfcpiface) up to at least version upf-epc-pfcpiface:2.1.3-dev. When the UPF receives a PFCP Association Setup Request that is missing the mandatory NodeID Information Element, the association setup handler dereferences a nil pointer instead of validating the message, causing a panic and terminating the UPF process. An attacker who can send PFCP Association Setup Request messages to the UPF's N4/PFCP endpoint can exploit this issue to repeatedly crash the UPF and disrupt user-plane services.

NULL pointer dereference in get_san_or_cn_from_cert() in src/coap_openssl.c in OISM libcoap 4.3.5 allows remote attackers to cause a denial of service via a crafted X.509 certificate that causes sk_GENERAL_NAME_value() to return NULL.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_ibm_upload.

An issue was discovered in GNU LibreDWG through 0.9.3. There is a NULL pointer dereference in the function dwg_encode_LWPOLYLINE in dwg.spec.

Null pointer dereference in free5gc pcf 1.4.0 in file internal/sbi/processor/ampolicy.go in function HandleDeletePoliciesPolAssoId.

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to cause the Junos OS kernel to crash. Continued receipt of this specifically crafted malicious MPLS packet will cause a sustained Denial of Service condition. This issue require it to be received on an interface configured to receive this type of traffic. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D76 prior to 12.1X46-D81 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 12.3R12-S10; 12.3X48 versions above and including 12.3X48-D66 prior to 12.3X48-D75 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 14.1X53-D47 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100; 14.1X53 versions above and including 14.1X53-D115 prior to 14.1X53-D130 on QFabric System; 15.1 versions above and including 15.1F6-S10; 15.1R4-S9; 15.1R6-S6; 15.1 versions above and including 15.1R7 prior to 15.1R7-S2; 15.1X49 versions above and including 15.1X49-D131 prior to 15.1X49-D150 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 15.1X53 versions above 15.1X53-D233 prior to 15.1X53-D235 on QFX5200/QFX5110; 15.1X53 versions up to and including 15.1X53-D471 prior to 15.1X53-D590 on NFX150, NFX250; 15.1X53-D67 on QFX10000 Series; 15.1X53-D59 on EX2300/EX3400; 16.1 versions above and including 16.1R3-S8; 16.1 versions above and including 16.1R4-S9 prior to 16.1R4-S12; 16.1 versions above and including 16.1R5-S4; 16.1 versions above and including 16.1R6-S3 prior to 16.1R6-S6; 16.1 versions above and including 16.1R7 prior to 16.1R7-S2; 16.2 versions above and including 16.2R1-S6; 16.2 versions above and including 16.2R2-S5 prior to 16.2R2-S7; 17.1R1-S7; 17.1 versions above and including 17.1R2-S7 prior to 17.1R2-S9; 17.2R1-S6; 17.2 versions above and including 17.2R2-S4 prior to 17.2R2-S6; 17.2X75 versions above and including 17.2X75-D100 prior to X17.2X75-D101, 17.2X75-D110; 17.3 versions above and including 17.3R1-S4 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.3 versions above and including 17.3R2-S2 prior to 17.3R2-S4 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.3R3 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.4 versions above and including 17.4R1-S3 prior to 17.4R1-S5 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.4R2 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.1 versions above and including 18.1R2 prior to 18.1R2-S3, 18.1R3 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.2 versions above and including 18.2R1 prior to 18.2R1-S2, 18.2R1-S3, 18.2R2 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.2X75 versions above and including 18.2X75-D5 prior to 18.2X75-D20.

A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. When the UPF receives a PFCP Session Report Response that is missing the mandatory Cause Information Element, the session report handler dereferences a nil pointer instead of rejecting the malformed message. This triggers a panic and terminates the UPF process. An attacker who can send PFCP Session Report Response messages to the UPF's N4/PFCP endpoint can exploit this flaw to repeatedly crash the UPF and disrupt user-plane services.

In mz-automation libiec61850 v1.4.0, a NULL Pointer Dereference was detected in the mmsServer_handleFileCloseRequest.c function of src/mms/iso_mms/server/mms_file_service.c. The vulnerability manifests as SEGV and causes the application to crash

VERITAS Backup Exec 9.0 through 10.0 for Windows Servers, and 9.0.4019 through 9.1.307 for Netware, allows remote attackers to cause a denial of service (Remote Agent crash) via (1) a crafted packet in NDMLSRVR.DLL or (2) a request packet with an invalid (non-0) "Error Status" value, which triggers a null dereference.

A NULL pointer dereference vulnerability in the importDataObject() function of PDF-XChange Editor v10.7.3.401 allows attackers to cause a Denial of Service (DoS) via a crafted input.

A null pointer dereference vulnerability exists in airpig2011 IEC104 thru Commit be6d841 (2019-07-08). When multiple threads enqueue elements concurrently via IEC10X_PrioEnQueue, the function may dereference a null or freed queue pointer, resulting in a segmentation fault and potential denial-of-service.

A vulnerability was found in Filseclab Twister Antivirus 8. It has been rated as critical. This issue affects the function 0x8011206B in the library fildds.sys of the component IoControlCode Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-223289 was assigned to this vulnerability.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions from 8.0.0 to before 8.0.2, a NULL dereference can occur when the entropy keyword is used in conjunction with base64_data. This issue has been patched in version 8.0.2. A workaround involves disabling rules that use entropy in conjunction with base64_data.

A missing nullptr-check in handle_ra_input can cause a nullptr-deref.

mah-jong before 1.6.2 allows remote attackers to cause a denial of service (server crash) via a missing argument, which triggers a null pointer dereference.

An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL does not call this function however third party applications might call these functions on untrusted data.

The Negotiate Security Software Provider (SSP) interface in Windows 2000, Windows XP, and Windows Server 2003, allows remote attackers to cause a denial of service (crash from null dereference) or execute arbitrary code via a crafted SPNEGO NegTokenInit request during authentication protocol selection.

An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash. This function can be called on public keys supplied from untrusted sources which could allow an attacker to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but applications might call the function if there are additional security requirements imposed by standards such as FIPS 140-3.

The dissect_attribute_value_pairs function in packet-radius.c for Ethereal 0.8.13 to 0.10.2 allows remote attackers to cause a denial of service (crash) via a malformed RADIUS packet that triggers a null dereference.

A NULL pointer dereference vulnerability in the Linux kernel NVMe functionality, in nvmet_setup_auth(), allows an attacker to perform a Pre-Auth Denial of Service (DoS) attack on a remote machine. Affected versions v6.0-rc1 to v6.0-rc3, fixed in v6.0-rc4.

RealNetworks Helix Universal Server 9.0.1 and 9.0.2 allows remote attackers to cause a denial of service (crash) via malformed requests that trigger a null dereference, as demonstrated using (1) GET_PARAMETER or (2) DESCRIBE requests.

The do_change_cipher_spec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference.