In the Linux kernel, the following vulnerability has been resolved: r8169: Fix possible ring buffer corruption on fragmented Tx packets. An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer.

In the Linux kernel, the following vulnerability has been resolved: net: gtp: Fix Use-After-Free in gtp_dellink Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: add missing boundary check in vm_access A missing bounds check in vm_access() can lead to an out-of-bounds read or write in the adjacent memory area, since the len attribute is not validated before the memcpy later in the function, potentially hitting: [ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000 [ 183.637934] #PF: supervisor read access in kernel mode [ 183.637997] #PF: error_code(0x0000) - not-present page [ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0 [ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI [ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1 [ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019 [ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10 [ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246 [ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc [ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004 [ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000 [ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000 [ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000 [ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000 [ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0 [ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 183.650142] Call Trace: [ 183.650988] <TASK> [ 183.651793] vm_access+0x1f0/0x2a0 [i915] [ 183.652726] __access_remote_vm+0x224/0x380 [ 183.653561] mem_rw.isra.0+0xf9/0x190 [ 183.654402] vfs_read+0x9d/0x1b0 [ 183.655238] ksys_read+0x63/0xe0 [ 183.656065] do_syscall_64+0x38/0xc0 [ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 183.657663] RIP: 0033:0x7fe5ef725142 [ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142 [ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005 [ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046 [ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0 [ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000 Changes since v1: - Updated if condition with range_overflows_t [Chris Wilson] [mauld: tidy up the commit message and add Cc: stable] (cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)

In the Linux kernel, the following vulnerability has been resolved: dm: fix use-after-free in dm_cleanup_zoned_dev() dm_cleanup_zoned_dev() uses queue, so it must be called before blk_cleanup_disk() starts its killing: blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()-> ->...RCU...->blk_free_queue_rcu()->kmem_cache_free() Otherwise, RCU callback may be executed first and dm_cleanup_zoned_dev() will touch free'd memory: BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0 Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681 CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x150 ? dm_cleanup_zoned_dev+0x33/0xd0 kasan_report.cold+0x7f/0x11b ? dm_cleanup_zoned_dev+0x33/0xd0 dm_cleanup_zoned_dev+0x33/0xd0 __dm_destroy+0x26a/0x400 ? dm_blk_ioctl+0x230/0x230 ? up_write+0xd8/0x270 dev_remove+0x156/0x1d0 ctl_ioctl+0x269/0x530 ? table_clear+0x140/0x140 ? lock_release+0xb2/0x750 ? remove_all+0x40/0x40 ? rcu_read_lock_sched_held+0x12/0x70 ? lock_downgrade+0x3c0/0x3c0 ? rcu_read_lock_sched_held+0x12/0x70 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb6dfa95c27

In the Linux kernel, the following vulnerability has been resolved: drm/i915/selftests: fix subtraction overflow bug On some machines hole_end can be small enough to cause subtraction overflow. On the other side (addr + 2 * min_alignment) can overflow in case of mock tests. This patch should handle both cases. (cherry picked from commit ab3edc679c552a466e4bf0b11af3666008bd65a2)

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Don't remove map on creater_process and device_release Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix double free race when mount fails in cifs_get_root() When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae

The kvm_iommu_map_pages function in virt/kvm/iommu.c in the Linux kernel through 3.17.2 miscalculates the number of pages during the handling of a mapping failure, which allows guest OS users to cause a denial of service (host OS page unpinning) or possibly have unspecified other impact by leveraging guest OS privileges. NOTE: this vulnerability exists because of an incorrect fix for CVE-2014-3601.

The svpn and policyserver components of the F5 BIG-IP APM client prior to version 7.1.7.1 for Linux and macOS runs as a privileged process and can allow an unprivileged user to get ownership of files owned by root on the local client host. A malicious local unprivileged user may gain knowledge of sensitive information, manipulate certain data, or assume super-user privileges on the local client host.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: always drop device refcount in ib_del_sub_device_and_put() Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add support to add/delete a sub IB device through netlink") grabs a reference using ib_device_get_by_index() before calling ib_del_sub_device_and_put(), we need to drop that reference before returning -EOPNOTSUPP error.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node() Previously, btrfs_get_or_create_delayed_node() set the delayed_node's refcount before acquiring the root->delayed_nodes lock. Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes") moved refcount_set inside the critical section, which means there is no longer a memory barrier between setting the refcount and setting btrfs_inode->delayed_node. Without that barrier, the stores to node->refs and btrfs_inode->delayed_node may become visible out of order. Another thread can then read btrfs_inode->delayed_node and attempt to increment a refcount that hasn't been set yet, leading to a refcounting bug and a use-after-free warning. The fix is to move refcount_set back to where it was to take advantage of the implicit memory barrier provided by lock acquisition. Because the allocations now happen outside of the lock's critical section, they can use GFP_NOFS instead of GFP_ATOMIC.

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb f ---truncated---

In the Linux kernel through 3.2, the rds_message_alloc_sgs() function does not validate a value that is used during DMA page allocation, leading to a heap-based out-of-bounds write (related to the rds_rdma_extra_size function in net/rds/rdma.c).

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access.

In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix possible double free of kmem_cache When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt'

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free when reverting termination table When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier() The scmi_dev->name is released prematurely in __scmi_device_destroy(), which causes slab-use-after-free when accessing scmi_dev->name in scmi_bus_notifier(). So move the release of scmi_dev->name to scmi_device_release() to avoid slab-use-after-free. | BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec | Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1 | | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1 | Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT) | Call trace: | dump_backtrace+0x94/0x114 | show_stack+0x18/0x24 | dump_stack_lvl+0x48/0x60 | print_report+0xf4/0x5b0 | kasan_report+0xa4/0xec | __asan_report_load1_noabort+0x20/0x2c | strncmp+0xe4/0xec | scmi_bus_notifier+0x5c/0x54c | notifier_call_chain+0xb4/0x31c | blocking_notifier_call_chain+0x68/0x9c | bus_notify+0x54/0x78 | device_del+0x1bc/0x840 | device_unregister+0x20/0xb4 | __scmi_device_destroy+0xac/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Allocated by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_alloc_info+0x24/0x34 | __kasan_kmalloc+0xa0/0xb8 | __kmalloc_node_track_caller+0x6c/0x104 | kstrdup+0x48/0x84 | kstrdup_const+0x34/0x40 | __scmi_device_create.part.0+0x8c/0x408 | scmi_device_create+0x104/0x370 | scmi_chan_setup+0x2a0/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Freed by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_free_info+0x38/0x5c | __kasan_slab_free+0xe8/0x164 | __kmem_cache_free+0x11c/0x230 | kfree+0x70/0x130 | kfree_const+0x20/0x40 | __scmi_device_destroy+0x70/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20

The sock_setsockopt function in net/core/sock.c in the Linux kernel before 4.8.14 mishandles negative values of sk_sndbuf and sk_rcvbuf, which allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability for a crafted setsockopt system call with the (1) SO_SNDBUFFORCE or (2) SO_RCVBUFFORCE option.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix use-after-free in device_for_each_child() Syzbot has reported the following KASAN splat: BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0 Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980 CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 ? device_for_each_child+0x18f/0x1a0 print_report+0x13a/0x4cb ? __virt_addr_valid+0x5e/0x590 ? __phys_addr+0xc6/0x150 ? device_for_each_child+0x18f/0x1a0 kasan_report+0xda/0x110 ? device_for_each_child+0x18f/0x1a0 ? __pfx_dev_memalloc_noio+0x10/0x10 device_for_each_child+0x18f/0x1a0 ? __pfx_device_for_each_child+0x10/0x10 pm_runtime_set_memalloc_noio+0xf2/0x180 netdev_unregister_kobject+0x1ed/0x270 unregister_netdevice_many_notify+0x123c/0x1d80 ? __mutex_trylock_common+0xde/0x250 ? __pfx_unregister_netdevice_many_notify+0x10/0x10 ? trace_contention_end+0xe6/0x140 ? __mutex_lock+0x4e7/0x8f0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x12/0xc0 ? unregister_netdev+0x12/0x30 unregister_netdevice_queue+0x30d/0x3f0 ? __pfx_unregister_netdevice_queue+0x10/0x10 ? __pfx_down_write+0x10/0x10 unregister_netdev+0x1c/0x30 bnep_session+0x1fb3/0x2ab0 ? __pfx_bnep_session+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_woken_wake_function+0x10/0x10 ? __kthread_parkme+0x132/0x200 ? __pfx_bnep_session+0x10/0x10 ? kthread+0x13a/0x370 ? __pfx_bnep_session+0x10/0x10 kthread+0x2b7/0x370 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x48/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 4974: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x1d1/0x440 hci_alloc_dev_priv+0x1d/0x2820 __vhci_create_device+0xef/0x7d0 vhci_write+0x2c7/0x480 vfs_write+0x6a0/0xfc0 ksys_write+0x12f/0x260 do_syscall_64+0xc7/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 4979: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x4f/0x70 kfree+0x141/0x490 hci_release_dev+0x4d9/0x600 bt_host_release+0x6a/0xb0 device_release+0xa4/0x240 kobject_put+0x1ec/0x5a0 put_device+0x1f/0x30 vhci_release+0x81/0xf0 __fput+0x3f6/0xb30 task_work_run+0x151/0x250 do_exit+0xa79/0x2c30 do_group_exit+0xd5/0x2a0 get_signal+0x1fcd/0x2210 arch_do_signal_or_restart+0x93/0x780 syscall_exit_to_user_mode+0x140/0x290 do_syscall_64+0xd4/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when an underlying (kobject) reference counter is greater than 1. This means that reparenting (happened when the device is actually freed) is delayed and, during that delay, parent controller device (hciX) may be deleted. Since the latter may create a dangling pointer to freed parent, avoid that scenario by reparenting to NULL explicitly.

In the Linux kernel, the following vulnerability has been resolved: ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit After an insertion in TNC, the tree might split and cause a node to change its `znode->parent`. A further deletion of other nodes in the tree (which also could free the nodes), the aforementioned node's `znode->cparent` could still point to a freed node. This `znode->cparent` may not be updated when getting nodes to commit in `ubifs_tnc_start_commit()`. This could then trigger a use-after-free when accessing the `znode->cparent` in `write_index()` in `ubifs_tnc_end_commit()`. This can be triggered by running rm -f /etc/test-file.bin dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then reports: BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950 Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153 Call trace: dump_backtrace+0x0/0x340 show_stack+0x18/0x24 dump_stack_lvl+0x9c/0xbc print_address_description.constprop.0+0x74/0x2b0 kasan_report+0x1d8/0x1f0 kasan_check_range+0xf8/0x1a0 memcpy+0x84/0xf4 ubifs_tnc_end_commit+0xa5c/0x1950 do_commit+0x4e0/0x1340 ubifs_bg_thread+0x234/0x2e0 kthread+0x36c/0x410 ret_from_fork+0x10/0x20 Allocated by task 401: kasan_save_stack+0x38/0x70 __kasan_kmalloc+0x8c/0xd0 __kmalloc+0x34c/0x5bc tnc_insert+0x140/0x16a4 ubifs_tnc_add+0x370/0x52c ubifs_jnl_write_data+0x5d8/0x870 do_writepage+0x36c/0x510 ubifs_writepage+0x190/0x4dc __writepage+0x58/0x154 write_cache_pages+0x394/0x830 do_writepages+0x1f0/0x5b0 filemap_fdatawrite_wbc+0x170/0x25c file_write_and_wait_range+0x140/0x190 ubifs_fsync+0xe8/0x290 vfs_fsync_range+0xc0/0x1e4 do_fsync+0x40/0x90 __arm64_sys_fsync+0x34/0x50 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 Freed by task 403: kasan_save_stack+0x38/0x70 kasan_set_track+0x28/0x40 kasan_set_free_info+0x28/0x4c __kasan_slab_free+0xd4/0x13c kfree+0xc4/0x3a0 tnc_delete+0x3f4/0xe40 ubifs_tnc_remove_range+0x368/0x73c ubifs_tnc_remove_ino+0x29c/0x2e0 ubifs_jnl_delete_inode+0x150/0x260 ubifs_evict_inode+0x1d4/0x2e4 evict+0x1c8/0x450 iput+0x2a0/0x3c4 do_unlinkat+0x2cc/0x490 __arm64_sys_unlinkat+0x90/0x100 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free when a node becomes root in TNC but still has a `cparent` to an already freed node. More specifically, consider the following TNC: zroot / / zp1 / / zn Inserting a new node `zn_new` with a key smaller then `zn` will trigger a split in `tnc_insert()` if `zp1` is full: zroot / \ / \ zp1 zp2 / \ / \ zn_new zn `zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still points to `zp1`. Now, consider a removal of all the nodes _except_ `zn`. Just when `tnc_delete()` is about to delete `zroot` and `zp2`: zroot \ \ zp2 \ \ zn `zroot` and `zp2` get freed and the tree collapses: zn `zn` now becomes the new `zroot`. `get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and `write_index()` will check its `znode->cparent` that wrongly points to the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called with `znode->cparent->zbranch[znode->iip].hash` that triggers the use-after-free! Fix this by explicitly setting `znode->cparent` to `NULL` in `get_znodes_to_commit()` for the root node. The search for the dirty nodes ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let's only add it to the list after everything has succeeded.

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device.

In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: Fix out-of-bounds array access In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an out-of-bound index. This is used as a special marker for the base extensions, that cannot be disabled. However, when traversing the extensions, that special marker is not checked prior indexing the array. Add an out-of-bounds check to the function.

A use-after-free vulnerability in the Linux kernel's net/sched: cls_fw component can be exploited to achieve local privilege escalation. If tcf_change_indev() fails, fw_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability. We recommend upgrading past commit 0323bce598eea038714f941ce2b22541c46d488f.

In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in SMB request handling A race condition exists between SMB request handling in `ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the workqueue handler `handle_ksmbd_work()`. This leads to a UAF. - KASAN: slab-use-after-free Read in handle_ksmbd_work - KASAN: slab-use-after-free in rtlock_slowlock_locked This race condition arises as follows: - `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero: `wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);` - Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using `atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls `ksmbd_conn_free()`, which frees `conn`. - However, after `handle_ksmbd_work()` decrements `conn->r_count`, it may still access `conn->r_count_q` in the following line: `waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)` This results in a UAF, as `conn` has already been freed. The discovery of this UAF can be referenced in the following PR for syzkaller's support for SMB requests.

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Release resources at card release The current 6fire code tries to release the resources right after the call of usb6fire_chip_abort(). But at this moment, the card object might be still in use (as we're calling snd_card_free_when_closed()). For avoid potential UAFs, move the release of resources to the card's private_free instead of the manual call of usb6fire_chip_destroy() at the USB disconnect callback.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix possible UAF in sctp_v6_available() A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints that sctp_v6_available() is calling dev_get_by_index_rcu() and ipv6_chk_addr() without holding rcu. [1] ============================= WARNING: suspicious RCU usage 6.12.0-rc5-virtme #1216 Tainted: G W ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by sctp_hello/31495: #0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp stack backtrace: CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7)) sctp_v6_available (net/sctp/ipv6.c:701) sctp sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp sctp_bind (net/sctp/socket.c:320) sctp inet6_bind_sk (net/ipv6/af_inet6.c:465) ? security_socket_bind (security/security.c:4581 (discriminator 1)) __sys_bind (net/socket.c:1848 net/socket.c:1869) ? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340) ? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13)) __x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1)) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f59b934a1e7 Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48 All code ======== 0: 44 00 00 add %r8b,(%rax) 3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43 a: f7 d8 neg %eax c: 64 89 02 mov %eax,%fs:(%rdx) f: b8 ff ff ff ff mov $0xffffffff,%eax 14: eb bd jmp 0xffffffffffffffd3 16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1) 1d: 00 00 00 20: 0f 1f 00 nopl (%rax) 23: b8 31 00 00 00 mov $0x31,%eax 28: 0f 05 syscall 2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction 30: 73 01 jae 0x33 32: c3 ret 33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43 3a: f7 d8 neg %eax 3c: 64 89 01 mov %eax,%fs:(%rcx) 3f: 48 rex.W Code starting with the faulting instruction =========================================== 0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax 6: 73 01 jae 0x9 8: c3 ret 9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19 10: f7 d8 neg %eax 12: 64 89 01 mov %eax,%fs:(%rcx) 15: 48 rex.W RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7 RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f59b9253298 R11: 000000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming.

In the Linux kernel, the following vulnerability has been resolved: hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer When hvs is released, there is a possibility that vsk->trans may not be initialized to NULL, which could lead to a dangling pointer. This issue is resolved by initializing vsk->trans to NULL.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix bfqq uaf in bfq_limit_depth() Set new allocated bfqq to bic or remove freed bfqq from bic are both protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq from bic without the lock, this can lead to UAF if the io_context is shared by multiple tasks. For example, test bfq with io_uring can trigger following UAF in v6.6: ================================================================== BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50 Call Trace: <TASK> dump_stack_lvl+0x47/0x80 print_address_description.constprop.0+0x66/0x300 print_report+0x3e/0x70 kasan_report+0xb4/0xf0 bfqq_group+0x15/0x50 bfqq_request_over_limit+0x130/0x9a0 bfq_limit_depth+0x1b5/0x480 __blk_mq_alloc_requests+0x2b5/0xa00 blk_mq_get_new_requests+0x11d/0x1d0 blk_mq_submit_bio+0x286/0xb00 submit_bio_noacct_nocheck+0x331/0x400 __block_write_full_folio+0x3d0/0x640 writepage_cb+0x3b/0xc0 write_cache_pages+0x254/0x6c0 write_cache_pages+0x254/0x6c0 do_writepages+0x192/0x310 filemap_fdatawrite_wbc+0x95/0xc0 __filemap_fdatawrite_range+0x99/0xd0 filemap_write_and_wait_range.part.0+0x4d/0xa0 blkdev_read_iter+0xef/0x1e0 io_read+0x1b6/0x8a0 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 808602: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc_node+0x1b1/0x6d0 bfq_get_queue+0x138/0xfa0 bfq_get_bfqq_handle_split+0xe3/0x2c0 bfq_init_rq+0x196/0xbb0 bfq_insert_request.isra.0+0xb5/0x480 bfq_insert_requests+0x156/0x180 blk_mq_insert_request+0x15d/0x440 blk_mq_submit_bio+0x8a4/0xb00 submit_bio_noacct_nocheck+0x331/0x400 __blkdev_direct_IO_async+0x2dd/0x330 blkdev_write_iter+0x39a/0x450 io_write+0x22a/0x840 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x1b/0x30 Freed by task 808589: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 __kasan_slab_free+0x126/0x1b0 kmem_cache_free+0x10c/0x750 bfq_put_queue+0x2dd/0x770 __bfq_insert_request.isra.0+0x155/0x7a0 bfq_insert_request.isra.0+0x122/0x480 bfq_insert_requests+0x156/0x180 blk_mq_dispatch_plug_list+0x528/0x7e0 blk_mq_flush_plug_list.part.0+0xe5/0x590 __blk_flush_plug+0x3b/0x90 blk_finish_plug+0x40/0x60 do_writepages+0x19d/0x310 filemap_fdatawrite_wbc+0x95/0xc0 __filemap_fdatawrite_range+0x99/0xd0 filemap_write_and_wait_range.part.0+0x4d/0xa0 blkdev_read_iter+0xef/0x1e0 io_read+0x1b6/0x8a0 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x1b/0x30 Fix the problem by protecting bic_to_bfqq() with bfqd->lock.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add missing range check in bitmap_ip_uadt When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists, the values of ip and ip_to are slightly swapped. Therefore, the range check for ip should be done later, but this part is missing and it seems that the vulnerability occurs. So we should add missing range checks and remove unnecessary range checks.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix race in concurrent f2fs_stop_gc_thread In my test case, concurrent calls to f2fs shutdown report the following stack trace: Oops: general protection fault, probably for non-canonical address 0xc6cfff63bb5513fc: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 678 Comm: f2fs_rep_shutdo Not tainted 6.12.0-rc5-next-20241029-g6fb2fa9805c5-dirty #85 Call Trace: <TASK> ? show_regs+0x8b/0xa0 ? __die_body+0x26/0xa0 ? die_addr+0x54/0x90 ? exc_general_protection+0x24b/0x5c0 ? asm_exc_general_protection+0x26/0x30 ? kthread_stop+0x46/0x390 f2fs_stop_gc_thread+0x6c/0x110 f2fs_do_shutdown+0x309/0x3a0 f2fs_ioc_shutdown+0x150/0x1c0 __f2fs_ioctl+0xffd/0x2ac0 f2fs_ioctl+0x76/0xe0 vfs_ioctl+0x23/0x60 __x64_sys_ioctl+0xce/0xf0 x64_sys_call+0x2b1b/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e The root cause is a race condition in f2fs_stop_gc_thread() called from different f2fs shutdown paths: [CPU0] [CPU1] ---------------------- ----------------------- f2fs_stop_gc_thread f2fs_stop_gc_thread gc_th = sbi->gc_thread gc_th = sbi->gc_thread kfree(gc_th) sbi->gc_thread = NULL < gc_th != NULL > kthread_stop(gc_th->f2fs_gc_task) //UAF The commit c7f114d864ac ("f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()") attempted to fix this issue by using a read semaphore to prevent races between shutdown and remount threads, but it fails to prevent all race conditions. Fix it by converting to write lock of s_umount in f2fs_do_shutdown().

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix use-after-free of slot->bus on hot remove Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock. Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware"), USB4 v2 and v1 Host Routers are reset on probe of the thunderbolt driver. The reset clears the Presence Detect State and Data Link Layer Link Active bits at the USB4 Host Router's Root Port and thus causes hot removal of the dock. The crash occurs when pciehp is unbound from one of the dock's Downstream Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The pci_slot contains a pointer to the pci_bus below the Downstream Port, but a reference on that pci_bus is never acquired. The pci_bus is destroyed before the pci_slot, so a use-after-free ensues when pci_slot_release() accesses slot->bus. In principle this should not happen because pci_stop_bus_device() unbinds pciehp (and therefore destroys the pci_slot) before the pci_bus is destroyed by pci_remove_bus_device(). However the stacktrace provided by Dennis shows that pciehp is unbound from pci_remove_bus_device() instead of pci_stop_bus_device(). To understand the significance of this, one needs to know that the PCI core uses a two step process to remove a portion of the hierarchy: It first unbinds all drivers in the sub-hierarchy in pci_stop_bus_device() and then actually removes the devices in pci_remove_bus_device(). There is no precaution to prevent driver binding in-between pci_stop_bus_device() and pci_remove_bus_device(). In Dennis' case, it seems removal of the hierarchy by pciehp races with driver binding by pci_bus_add_devices(). pciehp is bound to the Downstream Port after pci_stop_bus_device() has run, so it is unbound by pci_remove_bus_device() instead of pci_stop_bus_device(). Because the pci_bus has already been destroyed at that point, accesses to it result in a use-after-free. One might conclude that driver binding needs to be prevented after pci_stop_bus_device() has run. However it seems risky that pci_slot points to pci_bus without holding a reference. Solely relying on correct ordering of driver unbind versus pci_bus destruction is certainly not defensive programming. If pci_slot has a need to access data in pci_bus, it ought to acquire a reference. Amend pci_create_slot() accordingly. Dennis reports that the crash is not reproducible with this change. Abridged stacktrace: pcieport 0000:00:07.0: PME: Signaling with IRQ 156 pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ pci_bus 0000:20: dev 00, created physical slot 12 pcieport 0000:00:07.0: pciehp: Slot(12): Card not present ... pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0 Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1 RIP: 0010:dev_driver_string+0x12/0x40 pci_destroy_slot pciehp_remove pcie_port_remove_service device_release_driver_internal bus_remove_device device_del device_unregister remove_iter device_for_each_child pcie_portdrv_remove pci_device_remove device_release_driver_internal bus_remove_device device_del pci_remove_bus_device (recursive invocation) pci_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist

In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

In the Linux kernel, the following vulnerability has been resolved: block: fix uaf for flush rq while iterating tags blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [in ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ARM: 9381/1: kasan: clear stale stack poison We found below OOB crash: [ 33.452494] ================================================================== [ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0 [ 33.455515] [ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1 [ 33.456880] Hardware name: Generic DT based system [ 33.457555] unwind_backtrace from show_stack+0x18/0x1c [ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c [ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4 [ 33.459863] print_report from kasan_report+0x9c/0x148 [ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0 [ 33.461424] kasan_check_range from memset+0x20/0x3c [ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c [ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354 [ 33.465029] do_idle from cpu_startup_entry+0x20/0x24 [ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4 [ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18 [ 33.467397] [ 33.467644] The buggy address belongs to stack of task swapper/0/0 [ 33.468493] and is located at offset 112 in frame: [ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec [ 33.469917] [ 33.470165] This frame has 2 objects: [ 33.470696] [32, 76) 'global_zone_diff' [ 33.470729] [112, 276) 'global_node_diff' [ 33.471294] [ 33.472095] The buggy address belongs to the physical page: [ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03 [ 33.473944] flags: 0x1000(reserved|zone=0) [ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001 [ 33.475656] raw: 00000000 [ 33.476050] page dumped because: kasan: bad access detected [ 33.476816] [ 33.477061] Memory state around the buggy address: [ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 [ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1 [ 33.480415] ^ [ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3 [ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.482978] ================================================================== We find the root cause of this OOB is that arm does not clear stale stack poison in the case of cpuidle. This patch refer to arch/arm64/kernel/sleep.S to resolve this issue. From cited commit [1] that explain the problem Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In the case of cpuidle, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. If CPUs lose context and return to the kernel via a cold path, we restore a prior context saved in __cpu_suspend_enter are forgotten, and we never remove the poison they placed in the stack shadow area by functions calls between this and the actual exit of the kernel. Thus, (depending on stackframe layout) subsequent calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. From cited commit [2] Extend to check for CONFIG_KASAN_STACK [1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison") [2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle dml allocation failure to avoid crash [Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer (cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c)

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject struct_ops registration that uses module ptr and the module btf_id is missing There is a UAF report in the bpf_struct_ops when CONFIG_MODULES=n. In particular, the report is on tcp_congestion_ops that has a "struct module *owner" member. For struct_ops that has a "struct module *owner" member, it can be extended either by the regular kernel module or by the bpf_struct_ops. bpf_try_module_get() will be used to do the refcounting and different refcount is done based on the owner pointer. When CONFIG_MODULES=n, the btf_id of the "struct module" is missing: WARN: resolve_btfids: unresolved symbol module Thus, the bpf_try_module_get() cannot do the correct refcounting. Not all subsystem's struct_ops requires the "struct module *owner" member. e.g. the recent sched_ext_ops. This patch is to disable bpf_struct_ops registration if the struct_ops has the "struct module *" member and the "struct module" btf_id is missing. The btf_type_is_fwd() helper is moved to the btf.h header file for this test. This has happened since the beginning of bpf_struct_ops which has gone through many changes. The Fixes tag is set to a recent commit that this patch can apply cleanly. Considering CONFIG_MODULES=n is not common and the age of the issue, targeting for bpf-next also.

In the Linux kernel, the following vulnerability has been resolved: mm: resolve faulty mmap_region() error path behaviour The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust.

In the Linux kernel, the following vulnerability has been resolved: NFSv4.0: Fix a use-after-free problem in the asynchronous open() Yang Erkun reports that when two threads are opening files at the same time, and are forced to abort before a reply is seen, then the call to nfs_release_seqid() in nfs4_opendata_free() can result in a use-after-free of the pointer to the defunct rpc task of the other thread. The fix is to ensure that if the RPC call is aborted before the call to nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid() in nfs4_open_release() before the rpc_task is freed.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential array underflow in ucsi_ccg_sync_control() The "command" variable can be controlled by the user via debugfs. The worry is that if con_index is zero then "&uc->ucsi->connector[con_index - 1]" would be an array underflow.

In the Linux kernel, the following vulnerability has been resolved: vdpa: solidrun: Fix UB bug with devres In psnet_open_pf_bar() and snet_open_vf_bar() a string later passed to pcim_iomap_regions() is placed on the stack. Neither pcim_iomap_regions() nor the functions it calls copy that string. Should the string later ever be used, this, consequently, causes undefined behavior since the stack frame will by then have disappeared. Fix the bug by allocating the strings on the heap through devm_kasprintf().

get_gate_page in mm/gup.c in the Linux kernel 5.7.x and 5.8.x before 5.8.7 allows privilege escalation because of incorrect reference counting (caused by gate page mishandling) of the struct page that backs the vsyscall page. The result is a refcount underflow. This can be triggered by any 64-bit process that can use ptrace() or process_vm_readv(), aka CID-9fa2dd946743.

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix use-after-free of nreq in reqsk_timer_handler(). The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with __inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler(). Then, oreq should be passed to reqsk_put() instead of req; otherwise use-after-free of nreq could happen when reqsk is migrated but the retry attempt failed (e.g. due to timeout). Let's pass oreq to reqsk_put().

In the Linux kernel, the following vulnerability has been resolved: perf: Avoid undefined behavior from stopping/starting inactive events Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can leave event->hw.idx at -1. When PMU drivers later attempt to use this negative index as a shift exponent in bitwise operations, it leads to UBSAN shift-out-of-bounds reports. The issue is a logical flaw in how event groups handle throttling when some members are intentionally disabled. Based on the analysis and the reproducer provided by Mark Rutland (this issue on both arm64 and x86-64). The scenario unfolds as follows: 1. A group leader event is configured with a very aggressive sampling period (e.g., sample_period = 1). This causes frequent interrupts and triggers the throttling mechanism. 2. A child event in the same group is created in a disabled state (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF. Since it hasn't been scheduled onto the PMU, its event->hw.idx remains initialized at -1. 3. When throttling occurs, perf_event_throttle_group() and later perf_event_unthrottle_group() iterate through all siblings, including the disabled child event. 4. perf_event_throttle()/unthrottle() are called on this inactive child event, which then call event->pmu->start()/stop(). 5. The PMU driver receives the event with hw.idx == -1 and attempts to use it as a shift exponent. e.g., in macros like PMCNTENSET(idx), leading to the UBSAN report. The throttling mechanism attempts to start/stop events that are not actively scheduled on the hardware. Move the state check into perf_event_throttle()/perf_event_unthrottle() so that inactive events are skipped entirely. This ensures only active events with a valid hw.idx are processed, preventing undefined behavior and silencing UBSAN warnings. The corrected check ensures true before proceeding with PMU operations. The problem can be reproduced with the syzkaller reproducer:

In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix ordering of iput() and watched_objects decrement Ensure the superblock is kept alive until we're done with iput(). Holding a reference to an inode is not allowed unless we ensure the superblock stays alive, which fsnotify does by keeping the watched_objects count elevated, so iput() must happen before the watched_objects decrement. This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the UAF is hard to hit because race orderings that oops are more likely, thanks to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super(). Also, ensure that fsnotify_put_sb_watched_objects() doesn't call fsnotify_sb_watched_objects() on a superblock that may have already been freed, which would cause a UAF read of sb->s_fsnotify_info.

In the Linux kernel, the following vulnerability has been resolved: ima: fix buffer overrun in ima_eventdigest_init_common Function ima_eventdigest_init() calls ima_eventdigest_init_common() with HASH_ALGO__LAST which is then used to access the array hash_digest_size[] leading to buffer overrun. Have a conditional statement to handle this.