An issue was discovered in the Linux kernel through 5.11.11. synic_get in arch/x86/kvm/hyperv.c has a NULL pointer dereference for certain accesses to the SynIC Hyper-V context, aka CID-919f4ebc5987.

A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service.

A null pointer dereference issue was found in can protocol in net/can/af_can.c in the Linux before Linux. ml_priv may not be initialized in the receive path of CAN frames. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev setup Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller.

A NULL pointer dereference flaw was found in dbFree in fs/jfs/jfs_dmap.c in the journaling file system (JFS) in the Linux Kernel. This issue may allow a local attacker to crash the system due to a missing sanity check.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before used [WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context.

A NULL pointer dereference was found in io_file_bitmap_get in io_uring/filetable.c in the io_uring sub-component in the Linux Kernel. When fixed files are unregistered, some context information (file_alloc_{start,end} and alloc_hint) is not cleared. A subsequent request that has auto index selection enabled via IORING_FILE_INDEX_ALLOC can cause a NULL pointer dereference. An unprivileged user can use the flaw to cause a system crash.

In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1] If dvb->mux is not initialized successfully by vidtv_mux_init() in the vidtv_start_streaming(), it will trigger null pointer dereference about mux in vidtv_mux_stop_thread(). Adjust the timing of streaming initialization and check it before stopping it. [1] KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471 Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8 RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125 RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128 RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188 R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710 FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline] vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252 dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000 dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486 dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3f8/0xb60 fs/file_table.c:450 task_work_run+0x14e/0x250 kernel/task_work.c:239 get_signal+0x1d3/0x2610 kernel/signal.c:2790 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally.

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: rose: Fix NULL pointer dereference in rose_send_frame() The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)

In the Linux kernel, the following vulnerability has been resolved: net, neigh: Fix null-ptr-deref in neigh_table_clear() When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: <TASK> neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately.

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Store vhost pointer during subcrq allocation Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix region HPA ordering validation Some regions may not have any address space allocated. Skip them when validating HPA order otherwise a crash like the following may result: devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9 BUG: kernel NULL pointer dereference, address: 0000000000000000 [..] RIP: 0010:store_targetN+0x655/0x1740 [cxl_core] [..] Call Trace: <TASK> kernfs_fop_write_iter+0x144/0x200 vfs_write+0x24a/0x4d0 ksys_write+0x69/0xf0 do_syscall_64+0x3a/0x90 store_targetN+0x655/0x1740: alloc_region_ref at drivers/cxl/core/region.c:676 (inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850 (inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290 (inlined by) attach_target at drivers/cxl/core/region.c:1410 (inlined by) store_targetN at drivers/cxl/core/region.c:1453

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed There is a null-ptr-deref when xps sysfs alloc failed: BUG: KASAN: null-ptr-deref in sysfs_do_create_link_sd+0x40/0xd0 Read of size 8 at addr 0000000000000030 by task gssproxy/457 CPU: 5 PID: 457 Comm: gssproxy Not tainted 6.0.0-09040-g02357b27ee03 #9 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xa3/0x120 sysfs_do_create_link_sd+0x40/0xd0 rpc_sysfs_client_setup+0x161/0x1b0 rpc_new_client+0x3fc/0x6e0 rpc_create_xprt+0x71/0x220 rpc_create+0x1d4/0x350 gssp_rpc_create+0xc3/0x160 set_gssp_clnt+0xbc/0x140 write_gssp+0x116/0x1a0 proc_reg_write+0xd6/0x130 vfs_write+0x177/0x690 ksys_write+0xb9/0x150 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 When the xprt_switch sysfs alloc failed, should not add xprt and switch sysfs to it, otherwise, maybe null-ptr-deref; also initialize the 'xps_sysfs' to NULL to avoid oops when destroy it.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix tc flower deletion for VLAN priority Rx steering To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix the svc_deferred_event trace class Fix a NULL deref crash that occurs when an svc_rqst is deferred while the sunrpc tracing subsystem is enabled. svc_revisit() sets dr->xprt to NULL, so it can't be relied upon in the tracepoint to provide the remote's address. Unfortunately we can't revert the "svc_deferred_class" hunk in commit ece200ddd54b ("sunrpc: Save remote presentation address in svc_xprt for trace events") because there is now a specific check of event format specifiers for unsafe dereferences. The warning that check emits is: event svc_defer_recv has unsafe dereference of argument 1 A "%pISpc" format specifier with a "struct sockaddr *" is indeed flagged by this check. Instead, take the brute-force approach used by the svcrdma_qp_error tracepoint. Convert the dr::addr field into a presentation address in the TP_fast_assign() arm of the trace event, and store that as a string. This fix can be backported to -stable kernels. In the meantime, commit c6ced22997ad ("tracing: Update print fmt check to handle new __get_sockaddr() macro") is now in v5.18, so this wonky fix can be replaced with __sockaddr() and friends properly during the v5.19 merge window.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt This event is just specified for SCO and eSCO link types. On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR of an existing LE connection, LE link type and a status that triggers the second case of the packet processing a NULL pointer dereference happens, as conn->link is NULL.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: ipw2x00: Fix potential NULL dereference in libipw_xmit() crypt and crypt->ops could be null, so we need to checking null before dereference

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix kernel panic on skipped partition In the event of a skipped partition (case when the entry name is empty) the kernel panics in the cleanup function as the name entry is NULL. Rework the parser logic by first checking the real partition number and then allocate the space and set the data for the valid partitions. The logic was also fundamentally wrong as with a skipped partition, the parts number returned was incorrect by not decreasing it for the skipped partitions.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix null pointer dereference of pointer perfmon In the unlikely event that pointer perfmon is null the WARN_ON return path occurs after the pointer has already been deferenced. Fix this by only dereferencing perfmon after it has been null checked.

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead.

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly.

In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Allow probing without .driver_data Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path.

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: media: lgdt3306a: Add a check against null-pointer-def The driver should check whether the client provides the platform_data. The following log reveals it: [ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40 [ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414 [ 29.612820] Call Trace: [ 29.613030] <TASK> [ 29.613201] dump_stack_lvl+0x56/0x6f [ 29.613496] ? kmemdup+0x30/0x40 [ 29.613754] print_report.cold+0x494/0x6b7 [ 29.614082] ? kmemdup+0x30/0x40 [ 29.614340] kasan_report+0x8a/0x190 [ 29.614628] ? kmemdup+0x30/0x40 [ 29.614888] kasan_check_range+0x14d/0x1d0 [ 29.615213] memcpy+0x20/0x60 [ 29.615454] kmemdup+0x30/0x40 [ 29.615700] lgdt3306a_probe+0x52/0x310 [ 29.616339] i2c_device_probe+0x951/0xa90

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_core: handle NULL result of find_service_by_handle In case of an invalid handle the function find_servive_by_handle returns NULL. So take care of this and avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: Add NULL check in BE reparenting Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test.

In the Linux kernel, the following vulnerability has been resolved: net: sparx5: switchdev: fix possible NULL pointer dereference As the possible failure of the allocation, devm_kzalloc() may return NULL pointer. Therefore, it should be better to check the 'db' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: vduse: Fix NULL pointer dereference on sysfs access The control device has no drvdata. So we will get a NULL pointer dereference when accessing control device's msg_timeout attribute via sysfs: [ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271) [ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094) [ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59) [ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088) [ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164) [ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230) [ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041) [ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238) [ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1)) [ 132.876319][ T3644] kernel_read (fs/read_write.c:459) [ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94) [ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186) [ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207) [ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189) [ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132) [ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419) To fix it, don't create the unneeded attribute for control device anymore.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value. Patchwork: https://patchwork.freedesktop.org/patch/482992/

In the Linux kernel, the following vulnerability has been resolved: ovl: fix NULL pointer dereference in copy up warning This patch is fixing a NULL pointer dereference to get a recently introduced warning message working.

In the Linux kernel, the following vulnerability has been resolved: drm/vrr: Set VRR capable prop only if it is attached to connector VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereferences without iommu Check if 'aspace' is set before using it as it will stay null without IOMMU, such as on msm8974.

In the Linux kernel, the following vulnerability has been resolved: efi: fix NULL-deref in init error path In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't null dereference ops->destroy A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then.

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() It is possible to do NULL pointer dereference in routine that updates Tx ring stats. Currently only stats and bytes are updated when ring pointer is valid, but later on ring is accessed to propagate gathered Tx stats onto VSI stats. Change the existing logic to move to next ring when ring is NULL.

In the Linux kernel, the following vulnerability has been resolved: net: sfc: add missing xdp queue reinitialization After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference Added checking of pointer "function" in pcs_set_mux(). pinmux_generic_get_function() can return NULL and the pointer "function" was dereferenced without checking against NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE.