EnGenius ENH1350EXT A8J-ENH1350EXT devices through 3.9.3.2_c1.9.51 allow (blind) OS Command Injection via shell metacharacters to the Ping or Speed Test utility. During the time of initial setup, the device creates an open unsecured network whose admin panel is configured with the default credentials of admin/admin. An unauthorized attacker in proximity to the Wi-Fi network can exploit this window of time to execute arbitrary OS commands with root-level permissions.

EnGenius EWS356-FIR 1.1.30 and earlier devices allow a remote attacker to execute arbitrary OS commands via the Controller connectivity parameter.

EnGenius EWS356-FIT devices through 1.1.30 allow blind OS command injection. This allows an attacker to execute arbitrary OS commands via shell metacharacters to the Ping and Speed Test utilities.

The EnGenius EWS660AP router with firmware 2.0.284 allows an attacker to execute arbitrary commands using the built-in ping and traceroute utilities by using different payloads and injecting multiple parameters. This vulnerability is fixed in a later firmware version.

An OS command injection vulnerability exists in EnGenius EnShare Cloud Service version 1.4.11 and earlier. The usbinteract.cgi script fails to properly sanitize user input passed to the path parameter, allowing unauthenticated remote attackers to inject arbitrary shell commands. The injected commands are executed with root privileges, leading to full system compromise. Exploitation evidence was observed by the Shadowserver Foundation on 2024-12-05 UTC.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the Address parameter in the SetNetworkTomographySettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

Tenda AC7 v.15.03.06.44 ate_iwpriv_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

D-Link DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution. An attacker can achieve arbitrary command execution by sending a carefully crafted malicious string to the CGI function responsible for handling usb_paswd.asp.

Tenda AC7 v.15.03.06.44 ate_ifconfig_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

An OS command injection vulnerability in the ccm_debug component of MIPC Camera firmware prior to v5.4.1.240424171021 allows attackers within the same network to execute arbitrary code via a crafted HTML request.

This vulnerability allows network-adjacent attackers to execute arbitrary commands on affected installations of D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd service, which listens on TCP port 4044 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15905.

A command injection issue in TOTOLINK A6000R V1.0.1-B20201211.2000 firmware allows a remote attacker to execute arbitrary code via the iface parameter in the vif_enable function.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ChgSambaUserSettings function of prog.cgi, which allows remote attackers to execute arbitrary commands via shell.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent unauthenticated attacker to execute arbitrary OS commands by sending a specially crafted request to the product. Affected products and versions are as follows: WRC-X3200GST3-B v1.25 and earlier, WRC-G01-W v1.24 and earlier, and WMC-X1800GST-B v1.41 and earlier. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

Wi-Fi Alliance wfa_dut (in Wi-Fi Test Suite) through 9.0.0 allows OS command injection via 802.11x frames because the system() library function is used. For example, on Arcadyan FMIMG51AX000J devices, this leads to wfaTGSendPing remote code execution as root via traffic to TCP port 8000 or 8080 on a LAN interface. On other devices, this may be exploitable over a WAN interface.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the enable parameter in the setMacFilterRules function.

Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a network-adjacent unauthenticated attacker to execute an arbitrary OS command on the affected product.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the tz parameter in the setNtpCfg function.

D-Link DIR-878 has inadequate filtering for special characters in the webpage input field. An unauthenticated LAN attacker can perform command injection attack to execute arbitrary system commands to control the system or disrupt service.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6in4 function via the remote6in4 parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the setWanCfg function via the hostName parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product to execute arbitrary OS commands. The affected device, with the initial configuration, allows login only from the LAN port or Wi-Fi.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6rd function via the relay6rd parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

This issue was discovered when the ipTIME C200 IP Camera was synchronized with the ipTIME NAS. It is necessary to extract value for ipTIME IP camera because the ipTIME NAS send ans setCookie('[COOKIE]') . The value is transferred to the --header option in wget binary, and there is no validation check. This vulnerability allows remote attackers to execute remote command.

ASUS RT-AC86U’s LPD service has insufficient filtering for special characters in the user request, which allows an unauthenticated LAN attacker to perform command injection attack, execute arbitrary commands and disrupt or terminate service.

A command injection vulnerability exists in Wyze V4 Pro firmware versions before 4.50.4.9222, which allows attackers to execute arbitrary commands over Bluetooth as root during the camera setup process.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Brivo ACS100, ACS300 allows OS Command Injection, Bypassing Physical Security.This issue affects ACS100 (Network Adjacent Access), ACS300 (Physical Access): from 5.2.4 before 6.2.4.3.

TOTOLINK X5000R v9.1.0cu.2350_B20230313 was discovered to contain a command injection via the disconnectVPN function.

A malicious user on the same LAN could use DNS spoofing followed by a command injection attack to trick a NAS device into loading through an unsecured HTTP call. Addressed this vulnerability by disabling checks for internet connectivity using HTTP.

Netcommunity OG410X and OG810X series (Netcommunity OG410Xa, OG410Xi, OG810Xa, and OG810Xi firmware Ver.2.28 and earlier) allow an attacker on the adjacent network to execute an arbitrary OS command via a specially crafted config file.

D-Link G416 awsfile rm Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21811.

D-Link G416 cfgsave Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21286.

D-Link G416 awsfile chmod Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21298.

D-Link G416 flupl pythonapp Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21297.

D-Link G416 cfgsave upusb Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21289.

D-Link G416 nodered File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21807.

D-Link G416 nodered chmod Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21296.

D-Link G416 flupl filename Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21300.

D-Link G416 nodered tar File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21808.

D-Link G416 cfgsave backusb Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21288.

D-Link G416 awsfile tar File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21810.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker on the adjacent network to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

OpenBlocks IoT VX2 prior to Ver.4.0.0 (Ver.3 Series) allows an attacker on the same network segment to execute arbitrary OS commands with root privileges via unspecified vectors.

Aterm series (Aterm WF1200C firmware Ver1.2.1 and earlier, Aterm WG1200CR firmware Ver1.2.1 and earlier, Aterm WG2600HS firmware Ver1.3.2 and earlier) allows an attacker on the same network segment to execute arbitrary OS commands with root privileges via UPnP function.

D-Link DAP-1325 HNAP SetWLanRadioSettings Channel Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18822.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Orbi 2.5.1.16 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UA_Parser utility. A crafted Host Name option in a DHCP request can trigger execution of a system call composed from a user-supplied string. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11076.

Askey Fiber Router RTF3505VW-N1 BR_SV_g000_R3505VWN1001_s32_7 devices allow Remote Code Execution and retrieval of admin credentials to log into the Dashboard or login via SSH, leading to code execution as root.

A lack of input validation and access controls in Lua CGIs on D-Link DSR VPN routers may result in arbitrary input being passed to system command APIs, resulting in arbitrary command execution with root privileges. This affects DSR-150, DSR-250, DSR-500, and DSR-1000AC with firmware 3.14 and 3.17.

Furbo dog camera has insufficient filtering for special parameter of device log management function. An unauthenticated remote attacker in the Bluetooth network with normal user privileges can exploit this vulnerability to perform command injection attack to execute arbitrary system commands or disrupt service.

The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36,  USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled.