The ip_cmsg_recv_checksum function in net/ipv4/ip_sockglue.c in the Linux kernel before 4.10.1 has incorrect expectations about skb data layout, which allows local users to cause a denial of service (buffer over-read) or possibly have unspecified other impact via crafted system calls, as demonstrated by use of the MSG_MORE flag in conjunction with loopback UDP transmission.

It was discovered that the eBPF implementation in the Linux kernel did not properly track bounds information for 32 bit registers when performing div and mod operations. A local attacker could use this to possibly execute arbitrary code.

The eBPF ALU32 bounds tracking for bitwise ops (AND, OR and XOR) in the Linux kernel did not properly update 32-bit bounds, which could be turned into out of bounds reads and writes in the Linux kernel and therefore, arbitrary code execution. This issue was fixed via commit 049c4e13714e ("bpf: Fix alu32 const subreg bound tracking on bitwise operations") (v5.13-rc4) and backported to the stable kernels in v5.12.4, v5.11.21, and v5.10.37. The AND/OR issues were introduced by commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") (5.7-rc1) and the XOR variant was introduced by 2921c90d4718 ("bpf:Fix a verifier failure with xor") ( 5.10-rc1).

The bpf verifier in the Linux kernel did not properly handle mod32 destination register truncation when the source register was known to be 0. A local attacker with the ability to load bpf programs could use this gain out-of-bounds reads in kernel memory leading to information disclosure (kernel memory), and possibly out-of-bounds writes that could potentially lead to code execution. This issue was addressed in the upstream kernel in commit 9b00f1b78809 ("bpf: Fix truncation handling for mod32 dst reg wrt zero") and in Linux stable kernels 5.11.2, 5.10.19, and 5.4.101.

In the Linux kernel, the following vulnerability has been resolved: OPP: add index check to assert to avoid buffer overflow in _read_freq() Pass the freq index to the assert function to make sure we do not read a freq out of the opp->rates[] table when called from the indexed variants: dev_pm_opp_find_freq_exact_indexed() or dev_pm_opp_find_freq_ceil/floor_indexed(). Add a secondary parameter to the assert function, unused for assert_single_clk() then add assert_clk_index() which will check for the clock index when called from the _indexed() find functions.

The snd_msndmidi_input_read function in sound/isa/msnd/msnd_midi.c in the Linux kernel through 4.11.7 allows local users to cause a denial of service (over-boundary access) or possibly have unspecified other impact by changing the value of a message queue head pointer between two kernel reads of that value, aka a "double fetch" vulnerability.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.

A vulnerability was found in compare_netdev_and_ip in drivers/infiniband/core/cma.c in RDMA in the Linux Kernel. The improper cleanup results in out-of-boundary read, where a local user can utilize this problem to crash the system or escalation of privilege.

In the Linux kernel, the following vulnerability has been resolved: parport: Proper fix for array out-of-bounds access The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix out of bound check Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: add missing boundary check in vm_access A missing bounds check in vm_access() can lead to an out-of-bounds read or write in the adjacent memory area, since the len attribute is not validated before the memcpy later in the function, potentially hitting: [ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000 [ 183.637934] #PF: supervisor read access in kernel mode [ 183.637997] #PF: error_code(0x0000) - not-present page [ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0 [ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI [ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1 [ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019 [ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10 [ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246 [ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc [ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004 [ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000 [ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000 [ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000 [ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000 [ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0 [ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 183.650142] Call Trace: [ 183.650988] <TASK> [ 183.651793] vm_access+0x1f0/0x2a0 [i915] [ 183.652726] __access_remote_vm+0x224/0x380 [ 183.653561] mem_rw.isra.0+0xf9/0x190 [ 183.654402] vfs_read+0x9d/0x1b0 [ 183.655238] ksys_read+0x63/0xe0 [ 183.656065] do_syscall_64+0x38/0xc0 [ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 183.657663] RIP: 0033:0x7fe5ef725142 [ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142 [ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005 [ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046 [ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0 [ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000 Changes since v1: - Updated if condition with range_overflows_t [Chris Wilson] [mauld: tidy up the commit message and add Cc: stable] (cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)

In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Harden accesses to the reset domains Accessing reset domains descriptors by the index upon the SCMI drivers requests through the SCMI reset operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses.

In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780)

vcs_write in drivers/tty/vt/vc_screen.c in the Linux kernel through 5.3.13 does not prevent write access to vcsu devices, aka CID-0c9acb1af77a.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not return negative stream id for array [WHY] resource_stream_to_stream_idx returns an array index and it return -1 when not found; however, -1 is not a valid array index number. [HOW] When this happens, call ASSERT(), and return a zero instead. This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity.

An issue was discovered in the Linux kernel before 4.20.2. An out-of-bounds access exists in the function build_audio_procunit in the file sound/usb/mixer.c.

In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer.

An out-of-bounds (OOB) memory access flaw was found in x25_bind in net/x25/af_x25.c in the Linux kernel version v5.12-rc5. A bounds check failure allows a local attacker with a user account on the system to gain access to out-of-bounds memory, leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Prevent out-of-bounds memory access The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)fff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix global oob in ksmbd_nl_policy Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potencial out-of-bounds when buffer offset is invalid I found potencial out-of-bounds when buffer offset fields of a few requests is invalid. This patch set the minimum value of buffer offset field to ->Buffer offset to validate buffer length.

In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE.

An issue was discovered in ksmbd in the Linux kernel before 6.6.10. smb2_get_data_area_len in fs/smb/server/smb2misc.c can cause an smb_strndup_from_utf16 out-of-bounds access because the relationship between Name data and CreateContexts data is mishandled.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, data tampering, or information disclosure.

An issue was discovered in xenvif_set_hash_mapping in drivers/net/xen-netback/hash.c in the Linux kernel through 4.18.1, as used in Xen through 4.11.x and other products. The Linux netback driver allows frontends to control mapping of requests to request queues. When processing a request to set or change this mapping, some input validation (e.g., for an integer overflow) was missing or flawed, leading to OOB access in hash handling. A malicious or buggy frontend may cause the (usually privileged) backend to make out of bounds memory accesses, potentially resulting in one or more of privilege escalation, Denial of Service (DoS), or information leaks.

An out-of-bounds access vulnerability involving netfilter was reported and fixed as: f1082dd31fe4 (netfilter: nf_tables: Reject tables of unsupported family); While creating a new netfilter table, lack of a safeguard against invalid nf_tables family (pf) values within `nf_tables_newtable` function enables an attacker to achieve out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: vfio/platform: check the bounds of read/write syscalls count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix invalid page access after closing deferred I/O devices When a fbdev with deferred I/O is once opened and closed, the dirty pages still remain queued in the pageref list, and eventually later those may be processed in the delayed work. This may lead to a corruption of pages, hitting an Oops. This patch makes sure to cancel the delayed work and clean up the pageref list at closing the device for addressing the bug. A part of the cleanup code is factored out as a new helper function that is called from the common fb_release().

kernel/trace/trace_syscalls.c in the Linux kernel through 3.17.2 does not properly handle private syscall numbers during use of the perf subsystem, which allows local users to cause a denial of service (out-of-bounds read and OOPS) or bypass the ASLR protection mechanism via a crafted application.

An issue was discovered in the Linux kernel before 5.0.10. SMB2_negotiate in fs/cifs/smb2pdu.c has an out-of-bounds read because data structures are incompletely updated after a change from smb30 to smb21.

An issue was discovered in the Linux kernel before 5.2.3. An out of bounds access exists in the function hclge_tm_schd_mode_vnet_base_cfg in the file drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c.

The snd_msnd_interrupt function in sound/isa/msnd/msnd_pinnacle.c in the Linux kernel through 4.11.7 allows local users to cause a denial of service (over-boundary access) or possibly have unspecified other impact by changing the value of a message queue head pointer between two kernel reads of that value, aka a "double fetch" vulnerability.

The IPv6 fragmentation implementation in the Linux kernel through 4.11.1 does not consider that the nexthdr field may be associated with an invalid option, which allows local users to cause a denial of service (out-of-bounds read and BUG) or possibly have unspecified other impact via crafted socket and send system calls.

In the Linux kernel 4.14.x, 4.15.x, 4.16.x, 4.17.x, and 4.18.x before 4.18.13, faulty computation of numeric bounds in the BPF verifier permits out-of-bounds memory accesses because adjust_scalar_min_max_vals in kernel/bpf/verifier.c mishandles 32-bit right shifts.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an out-of-bounds read may lead to denial of service, information disclosure, or data tampering.

An out-of-bounds access issue was found in the Linux kernel sound subsystem. It could occur when the 'id->name' provided by the user did not end with '\0'. A privileged local user could pass a specially crafted name through ioctl() interface and crash the system or potentially escalate their privileges on the system.

In __f2fs_setxattr in fs/f2fs/xattr.c in the Linux kernel through 5.15.11, there is an out-of-bounds memory access when an inode has an invalid last xattr entry.

In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks]

In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is returned.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since 6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses were permitted above state->allocated_stack, but not below it. In other words, if the stack was already "large enough", the access was permitted, but otherwise the access was rejected instead of being allowed to "grow the stack". This undesired rejection was happening in two places: - in check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of them were changed to add also run unprivileged, in which case the old behavior persists. One tests couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same commit as the first one because they're inter-related. Before this patch, writes to the stack using registers containing a variable offset (as opposed to registers with fixed, known values) were not properly contributing to the function's needed stack size. As a result, it was possible for a program to verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth, which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the variable offset. This was incorrect; the minimum possible value of that register should be used instead. This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The code is now simpler and more convincingly tracks the correct maximum stack size. check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this helps with the fix for the first issue. A few tests were changed to also check the stack depth computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

In the Linux kernel, the following vulnerability has been resolved: crypto: scomp - fix req->dst buffer overflow The req->dst buffer size should be checked before copying from the scomp_scratch->dst to avoid req->dst buffer overflow problem.

In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix buffer overflow in trans_stat_show Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt