In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix rdma_resolve_route() memory leak Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id". This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Wrap the tx reporter dump callback to extract the sq Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually of type struct mlx5e_tx_timeout_ctx *. mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae) kernel stack overflow (page fault): 0000 [#1] SMP NOPTI CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 [mlx5_core] Call Trace: mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core] devlink_health_do_dump.part.91+0x71/0xd0 devlink_health_report+0x157/0x1b0 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core] ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0 [mlx5_core] ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core] ? update_load_avg+0x19b/0x550 ? set_next_entity+0x72/0x80 ? pick_next_task_fair+0x227/0x340 ? finish_task_switch+0xa2/0x280 mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core] process_one_work+0x1de/0x3a0 worker_thread+0x2d/0x3c0 ? process_one_work+0x3a0/0x3a0 kthread+0x115/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 --[ end trace 51ccabea504edaff ]--- RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled end Kernel panic - not syncing: Fatal exception To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the TX-timeout-recovery flow dump callback.

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: regulators: Fix locking up when voltage-spread is out of range Fix voltage coupler lockup which happens when voltage-spread is out of range due to a bug in the code. The max-spread requirement shall be accounted when CPU regulator doesn't have consumers. This problem is observed on Tegra30 Ouya game console once system-wide DVFS is enabled in a device-tree.

In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: nfc: fix segfault in nfc_genl_dump_devices_done When kmalloc in nfc_genl_dump_devices() fails then nfc_genl_dump_devices_done() segfaults as below KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:klist_iter_exit+0x26/0x80 Call Trace: <TASK> class_dev_iter_exit+0x15/0x20 nfc_genl_dump_devices_done+0x3b/0x50 genl_lock_done+0x84/0xd0 netlink_sock_destruct+0x8f/0x270 __sk_destruct+0x64/0x3b0 sk_destruct+0xa8/0xd0 __sk_free+0x2e8/0x3d0 sk_free+0x51/0x90 netlink_sock_destruct_work+0x1c/0x20 process_one_work+0x411/0x710 worker_thread+0x6fd/0xa80

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix resume from sleep before interface was brought up Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. [mkl: fix error handling in mcp251x_stop()]

In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX flush done handling We're starting from a TXQ instance number ('qid'), not a TXQ type, so efx_get_tx_queue() is inappropriate (and could return NULL, leading to panics).

In the Linux kernel, the following vulnerability has been resolved: selinux: fix NULL-pointer dereference when hashtab allocation fails When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prevent divide-by-zero error triggered by the user The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Fix memory leaks in error handling path Should an error occur (invalid TLV len or memory allocation failure), the memory already allocated in 'reduce_power_data' should be freed before returning, otherwise it is leaking.

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated---

In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel_pmc_core: fix memleak on registration failure In case device registration fails during module initialisation, the platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name).

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix potential memleak In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix NULL dereference in nfs3svc_encode_getaclres In error cases the dentry may be NULL. Before 20798dfe249a, the encoder also checked dentry and d_really_is_positive(dentry), but that looks like overkill to me--zero status should be enough to guarantee a positive dentry. This isn't the first time we've seen an error-case NULL dereference hidden in the initialization of a local variable in an xdr encoder. But I went back through the other recent rewrites and didn't spot any similar bugs.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add pointer checks in qedf_update_link_speed() The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: fix memory leak in mt7615_coredump_work Similar to the issue fixed in mt7921_coredump_work, fix a possible memory leak in mt7615_coredump_work routine.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix null pointer dereference on pointer cs_desc The pointer cs_desc return from snd_usb_find_clock_source could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: ext4: always panic when errors=panic is specified Before commit 014c9caa29d3 ("ext4: make ext4_abort() use __ext4_error()"), the following series of commands would trigger a panic: 1. mount /dev/sda -o ro,errors=panic test 2. mount /dev/sda -o remount,abort test After commit 014c9caa29d3, remounting a file system using the test mount option "abort" will no longer trigger a panic. This commit will restore the behaviour immediately before commit 014c9caa29d3. (However, note that the Linux kernel's behavior has not been consistent; some previous kernel versions, including 5.4 and 4.19 similarly did not panic after using the mount option "abort".) This also makes a change to long-standing behaviour; namely, the following series commands will now cause a panic, when previously it did not: 1. mount /dev/sda -o ro,errors=panic test 2. echo test > /sys/fs/ext4/sda/trigger_fs_error However, this makes ext4's behaviour much more consistent, so this is a good thing.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix shared sqpoll cancellation hangs [ 736.982891] INFO: task iou-sqp-4294:4295 blocked for more than 122 seconds. [ 736.982897] Call Trace: [ 736.982901] schedule+0x68/0xe0 [ 736.982903] io_uring_cancel_sqpoll+0xdb/0x110 [ 736.982908] io_sqpoll_cancel_cb+0x24/0x30 [ 736.982911] io_run_task_work_head+0x28/0x50 [ 736.982913] io_sq_thread+0x4e3/0x720 We call io_uring_cancel_sqpoll() one by one for each ctx either in sq_thread() itself or via task works, and it's intended to cancel all requests of a specified context. However the function uses per-task counters to track the number of inflight requests, so it counts more requests than available via currect io_uring ctx and goes to sleep for them to appear (e.g. from IRQ), that will never happen. Cancel a bit more than before, i.e. all ctxs that share sqpoll and continue to use shared counters. Don't forget that we should not remove ctx from the list before running that task_work sqpoll-cancel, otherwise the function wouldn't be able to find the context and will hang.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't remove idle classes from the round-robin list Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT, Fix multiple allocations and memleak of mod acts CT clear action offload adds additional mod hdr actions to the flow's original mod actions in order to clear the registers which hold ct_state. When such flow also includes encap action, a neigh update event can cause the driver to unoffload the flow and then reoffload it. Each time this happens, the ct clear handling adds that same set of mod hdr actions to reset ct_state until the max of mod hdr actions is reached. Also the driver never releases the allocated mod hdr actions and causing a memleak. Fix above two issues by moving CT clear mod acts allocation into the parsing actions phase and only use it when offloading the rule. The release of mod acts will be done in the normal flow_put(). backtrace: [<000000007316e2f3>] krealloc+0x83/0xd0 [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core] [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core] [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core] [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core] [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core] [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core] [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core] [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core] [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]

In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find).

In the Linux kernel, the following vulnerability has been resolved: media: venus: vdec: fixed possible memory leak issue The venus_helper_alloc_dpb_bufs() implementation allows an early return on an error path when checking the id from ida_alloc_min() which would not release the earlier buffer allocation. Move the direct kfree() from the error checking of dma_alloc_attrs() to the common fail path to ensure that allocations are released on all error paths in this function. Addresses-Coverity: 1494120 ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Disable preemption when probing user return MSRs Disable preemption when probing a user return MSR via RDSMR/WRMSR. If the MSR holds a different value per logical CPU, the WRMSR could corrupt the host's value if KVM is preempted between the RDMSR and WRMSR, and then rescheduled on a different CPU. Opportunistically land the helper in common x86, SVM will use the helper in a future commit.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: add error handling in sja1105_setup() If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path.

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix zcard and zqueue hot-unplug memleak Tests with kvm and a kmemdebug kernel showed, that on hot unplug the zcard and zqueue structs for the unplugged card or queue are not properly freed because of a mismatch with get/put for the embedded kref counter. This fix now adjusts the handling of the kref counters. With init the kref counter starts with 1. This initial value needs to drop to zero with the unregister of the card or queue to trigger the release and free the object.

In the Linux kernel, the following vulnerability has been resolved: bus: qcom: Put child node before return Put child node before return to fix potential reference count leak. Generally, the reference count of child is incremented and decremented automatically in the macro for_each_available_child_of_node() and should be decremented manually if the loop is broken in loop body.

In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register()

In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840

In the Linux kernel, the following vulnerability has been resolved: tipc: wait and exit until all work queues are done On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net().

In the Linux kernel, the following vulnerability has been resolved: nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done The done() netlink callback nfc_genl_dump_ses_done() should check if received argument is non-NULL, because its allocation could fail earlier in dumpit() (nfc_genl_dump_ses()).

In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: fix null pointer dereference on pointer block The pointer block return from snd_gf1_dma_next_block could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Coverity reports a possible NULL dereferencing problem: in smc_vlan_by_tcpsk(): 6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times). 7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS) 8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Remove the manual implementation and use netdev_walk_all_lower_dev() to iterate over the lower devices. While on it remove an obsolete function parameter comment.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Limit the period size to 16MB Set the practical limit to the period size (the fragment shift in OSS) instead of a full 31bit; a too large value could lead to the exhaust of memory as we allocate temporary buffers of the period size, too. As of this patch, we set to 16MB limit, which should cover all use cases.

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency The entry/exit latency and minimum residency in state for the idle states of MSM8998 were ..bad: first of all, for all of them the timings were written for CPU sleep but the min-residency-us param was miscalculated (supposedly, while porting this from downstream); Then, the power collapse states are setting PC on both the CPU cluster *and* the L2 cache, which have different timings: in the specific case of L2 the times are higher so these ones should be taken into account instead of the CPU ones. This parameter misconfiguration was not giving particular issues because on MSM8998 there was no CPU scaling at all, so cluster/L2 power collapse was rarely (if ever) hit. When CPU scaling is enabled, though, the wrong timings will produce SoC unstability shown to the user as random, apparently error-less, sudden reboots and/or lockups. This set of parameters are stabilizing the SoC when CPU scaling is ON and when power collapse is frequently hit.

In the Linux kernel, the following vulnerability has been resolved: async_xor: increase src_offs when dropping destination page Now we support sharing one page if PAGE_SIZE is not equal stripe size. To support this, it needs to support calculating xor value with different offsets for each r5dev. One offset array is used to record those offsets. In RMW mode, parity page is used as a source page. It sets ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5. So it needs to add src_list and src_offs at the same time. Now it only needs src_list. So the xor value which is calculated is wrong. It can cause data corruption problem. I can reproduce this problem 100% on a POWER8 machine. The steps are: mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G mkfs.xfs /dev/md0 mount /dev/md0 /mnt/test mount: /mnt/test: mount(2) system call failed: Structure needs cleaning.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: ubifs: rename_whiteout: Fix double free for whiteout_ui->data 'whiteout_ui->data' will be freed twice if space budget fail for rename whiteout operation as following process: rename_whiteout dev = kmalloc whiteout_ui->data = dev kfree(whiteout_ui->data) // Free first time iput(whiteout) ubifs_free_inode kfree(ui->data) // Double free! KASAN reports: ================================================================== BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70 Call Trace: kfree+0x117/0x490 ubifs_free_inode+0x4f/0x70 [ubifs] i_callback+0x30/0x60 rcu_do_batch+0x366/0xac0 __do_softirq+0x133/0x57f Allocated by task 1506: kmem_cache_alloc_trace+0x3c2/0x7a0 do_rename+0x9b7/0x1150 [ubifs] ubifs_rename+0x106/0x1f0 [ubifs] do_syscall_64+0x35/0x80 Freed by task 1506: kfree+0x117/0x490 do_rename.cold+0x53/0x8a [ubifs] ubifs_rename+0x106/0x1f0 [ubifs] do_syscall_64+0x35/0x80 The buggy address belongs to the object at ffff88810238bed8 which belongs to the cache kmalloc-8 of size 8 ================================================================== Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode() -> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it (because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release', and the nlink of whiteout inode is 0).

In the Linux kernel, the following vulnerability has been resolved: thermal: Fix NULL pointer dereferences in of_thermal_ functions of_parse_thermal_zones() parses the thermal-zones node and registers a thermal_zone device for each subnode. However, if a thermal zone is consuming a thermal sensor and that thermal sensor device hasn't probed yet, an attempt to set trip_point_*_temp for that thermal zone device can cause a NULL pointer dereference. Fix it. console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... Call trace: of_thermal_set_trip_temp+0x40/0xc4 trip_point_temp_store+0xc0/0x1dc dev_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec __arm64_sys_write+0x20/0x30 el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc do_el0_svc+0x28/0xa0 el0_svc+0x14/0x24 el0_sync_handler+0x88/0xec el0_sync+0x1c0/0x200 While at it, fix the possible NULL pointer dereference in other functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(), of_thermal_get_trend().

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix panic during f2fs_resize_fs() f2fs_resize_fs() hangs in below callstack with testcase: - mkfs 16GB image & mount image - dd 8GB fileA - dd 8GB fileB - sync - rm fileA - sync - resize filesystem to 8GB kernel BUG at segment.c:2484! Call Trace: allocate_segment_by_default+0x92/0xf0 [f2fs] f2fs_allocate_data_block+0x44b/0x7e0 [f2fs] do_write_page+0x5a/0x110 [f2fs] f2fs_outplace_write_data+0x55/0x100 [f2fs] f2fs_do_write_data_page+0x392/0x850 [f2fs] move_data_page+0x233/0x320 [f2fs] do_garbage_collect+0x14d9/0x1660 [f2fs] free_segment_range+0x1f7/0x310 [f2fs] f2fs_resize_fs+0x118/0x330 [f2fs] __f2fs_ioctl+0x487/0x3680 [f2fs] __x64_sys_ioctl+0x8e/0xd0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is we forgot to check that whether we have enough space in resized filesystem to store all valid blocks in before-resizing filesystem, then allocator will run out-of-space during block migration in free_segment_range().

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/kms/nv50-: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked.