In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed...

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com>

In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix negative period/buffer sizes The period size calculation in OSS layer may receive a negative value as an error, but the code there assumes only the positive values and handle them with size_t. Due to that, a too big value may be passed to the lower layers. This patch changes the code to handle with ssize_t and adds the proper error checks appropriately.

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix memory leak in rds_recvmsg Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | }

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com On the case tmp_dcim=1, the index of buffer is miscalculated. This generate a NULL pointer dereference later. So let's fix the calcul and add a check to prevent this to reappear.

In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed.

In the Linux kernel, the following vulnerability has been resolved: regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL devm_gpiod_get_array_optional may return NULL if no GPIO was assigned.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Don't call free_pages_exact() with NULL address Unlike some other functions, we can't pass NULL pointer to free_pages_exact(). Add a proper NULL check for avoiding possible Oops.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: bcm-voter: add a missing of_node_put() Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak.

In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set This may be a typo. The comment has said shared locks are not allowed when this bit is set. If using shared lock, the wait in `fuse_file_cached_io_open` may be forever.

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a memory leak in 'host1x_remove()' Add a missing 'host1x_channel_list_free()' call in the remove function, as already done in the error handling path of the probe function.

In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadgets null ptr deref on 10gbps cabling. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ssif: initialize ssif_info->client early During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698

In the Linux kernel, the following vulnerability has been resolved: sch_htb: fix refcount leak in htb_parent_to_leaf_offload The commit ae81feb7338c ("sch_htb: fix null pointer dereference on a null new_q") fixes a NULL pointer dereference bug, but it is not correct. Because htb_graft_helper properly handles the case when new_q is NULL, and after the previous patch by skipping this call which creates an inconsistency : dev_queue->qdisc will still point to the old qdisc, but cl->parent->leaf.q will point to the new one (which will be noop_qdisc, because new_q was NULL). The code is based on an assumption that these two pointers are the same, so it can lead to refcount leaks. The correct fix is to add a NULL pointer check to protect qdisc_refcount_inc inside htb_parent_to_leaf_offload.

In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 }

In the Linux kernel, the following vulnerability has been resolved: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test.

In the Linux kernel, the following vulnerability has been resolved: devlink: fix netns refcount leak in devlink_nl_cmd_reload() While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload().

In the Linux kernel, the following vulnerability has been resolved: perf bpf: Avoid memory leak from perf_env__insert_btf() perf_env__insert_btf() doesn't insert if a duplicate BTF id is encountered and this causes a memory leak. Modify the function to return a success/error value and then free the memory if insertion didn't happen. v2. Adds a return -1 when the insertion error occurs in perf_env__fetch_btf. This doesn't affect anything as the result is never checked.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: neighbour: allow NUD_NOARP entries to be forced GCed IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 58956317c8de ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old.

In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register()

In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix an incorrect limit in filelayout_decode_layout() The "sizeof(struct nfs_fh)" is two bytes too large and could lead to memory corruption. It should be NFS_MAXFHSIZE because that's the size of the ->data[] buffer. I reversed the size of the arguments to put the variable on the left.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT, Fix multiple allocations and memleak of mod acts CT clear action offload adds additional mod hdr actions to the flow's original mod actions in order to clear the registers which hold ct_state. When such flow also includes encap action, a neigh update event can cause the driver to unoffload the flow and then reoffload it. Each time this happens, the ct clear handling adds that same set of mod hdr actions to reset ct_state until the max of mod hdr actions is reached. Also the driver never releases the allocated mod hdr actions and causing a memleak. Fix above two issues by moving CT clear mod acts allocation into the parsing actions phase and only use it when offloading the rule. The release of mod acts will be done in the normal flow_put(). backtrace: [<000000007316e2f3>] krealloc+0x83/0xd0 [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core] [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core] [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core] [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core] [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core] [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core] [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core] [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core] [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn.

In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated---

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null.

In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: fix a memory leak in rtw_wx_read32() Free "ptmp" before returning -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: mac80211: track only QoS data frames for admission control For admission control, obviously all of that only works for QoS data frames, otherwise we cannot even access the QoS field in the header. Syzbot reported (see below) an uninitialized value here due to a status of a non-QoS nullfunc packet, which isn't even long enough to contain the QoS header. Fix this to only do anything for QoS data packets.

In the Linux kernel, the following vulnerability has been resolved: thermal: Fix NULL pointer dereferences in of_thermal_ functions of_parse_thermal_zones() parses the thermal-zones node and registers a thermal_zone device for each subnode. However, if a thermal zone is consuming a thermal sensor and that thermal sensor device hasn't probed yet, an attempt to set trip_point_*_temp for that thermal zone device can cause a NULL pointer dereference. Fix it. console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... Call trace: of_thermal_set_trip_temp+0x40/0xc4 trip_point_temp_store+0xc0/0x1dc dev_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec __arm64_sys_write+0x20/0x30 el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc do_el0_svc+0x28/0xa0 el0_svc+0x14/0x24 el0_sync_handler+0x88/0xec el0_sync+0x1c0/0x200 While at it, fix the possible NULL pointer dereference in other functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(), of_thermal_get_trend().

In the Linux kernel, the following vulnerability has been resolved: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: <IRQ> sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297

A flaw was found in the sctp_make_strreset_req function in net/sctp/sm_make_chunk.c in the SCTP network protocol in the Linux kernel with a local user privilege access. In this flaw, an attempt to use more buffer than is allocated triggers a BUG_ON issue, leading to a denial of service (DOS).

In the Linux kernel, the following vulnerability has been resolved: net: fix uninit-value in caif_seqpkt_sendmsg When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline]

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore().

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: rpmpd: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a potential NULL dereference in nfs_get_client() None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Fix memory leak during rmmod Driver failed to release all memory allocated. This would lead to memory leak during driver removal. Properly free memory when the module is removed.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top".

In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: prevent dismantle issue For some reason, fq_pie_destroy() did not copy working code from pie_destroy() and other qdiscs, thus causing elusive bug. Before calling del_timer_sync(&q->adapt_timer), we need to ensure timer will not rearm itself. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579 (t=10501 jiffies g=13085 q=3989) NMI backtrace for cpu 0 CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:627 [inline] check_cpu_stall kernel/rcu/tree_stall.h:711 [inline] rcu_pending kernel/rcu/tree.c:3878 [inline] rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:write_comp_data kernel/kcov.c:221 [inline] RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273 Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00 RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000 RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003 RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000 pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418 fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK>