In the Linux kernel, the following vulnerability has been resolved: gpio: davinci: Validate the obtained number of IRQs Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken DT due to any error this value can be any. Without this value validation there can be out of chips->irqs array boundaries access in davinci_gpio_probe(). Validate the obtained nirq value so that it won't exceed the maximum number of IRQs per bank. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index msg_id before read or write [WHAT] msg_id is used as an array index and it cannot be a negative value, and therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1). [HOW] Check whether msg_id is valid before reading and setting. This fixes 4 OVERRUN issues reported by Coverity.
In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}
In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: Avoid address calculations via out of bounds array indexing Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning.
In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}'
In the Linux kernel, the following vulnerability has been resolved: iio: adc: PAC1934: fix accessing out of bounds array index Fix accessing out of bounds array index for average current and voltage measurements. The device itself has only 4 channels, but in sysfs there are "fake" channels for the average voltages and currents too.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: guard against invalid STA ID on removal Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would result in out-of-bounds array accesses. This prevents issues should the driver get into a bad state during error handling.
In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.
In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size.
In the Linux kernel, the following vulnerability has been resolved: isdn: cpai: check ctr->cnr to avoid array index out of bound The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479]
In the Linux kernel, the following vulnerability has been resolved: pktgen: Avoid out-of-bounds access in get_imix_entries Passing a sufficient amount of imix entries leads to invalid access to the pkt_dev->imix_entries array because of the incorrect boundary check. UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24 index 20 is out of range for type 'imix_pkt [20]' CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl lib/dump_stack.c:117 __ubsan_handle_out_of_bounds lib/ubsan.c:429 get_imix_entries net/core/pktgen.c:874 pktgen_if_write net/core/pktgen.c:1063 pde_write fs/proc/inode.c:334 proc_reg_write fs/proc/inode.c:346 vfs_write fs/read_write.c:593 ksys_write fs/read_write.c:644 do_syscall_64 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130 Found by Linux Verification Center (linuxtesting.org) with SVACE. [ fp: allow to fill the array completely; minor changelog cleanup ]
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Collect command failures data only for known commands DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data.
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbAdjTree Currently there is a bound check missing in the dbAdjTree while accessing the dmt_stree. To add the required check added the bool is_ctl which is required to determine the size as suggest in the following commit. https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diAlloc Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required.
In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]' CPU: 37 PID: 1678 Comm: cat Not tainted 6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_backtrace+0xe0/0x130 show_stack+0x20/0x60 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 ubsan_epilogue+0x10/0x50 __ubsan_handle_out_of_bounds+0x80/0x90 acpi_ds_exec_end_op+0x1bc/0x6d8 acpi_ps_parse_loop+0x57c/0x618 acpi_ps_parse_aml+0x1e0/0x4b4 acpi_ps_execute_method+0x24c/0x2b8 acpi_ns_evaluate+0x3a8/0x4bc acpi_evaluate_object+0x15c/0x37c acpi_evaluate_integer+0x54/0x15c show_power+0x8c/0x12c [acpi_power_meter]
In the Linux kernel, the following vulnerability has been resolved: netlink: prevent potential spectre v1 gadgets Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix array out-of-bound access in SoC stats Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
In the Linux kernel, the following vulnerability has been resolved: fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:1965:6 index -84 is out of range for type 's8[341]' (aka 'signed char[341]') CPU: 1 PID: 4995 Comm: syz-executor146 Not tainted 6.4.0-rc6-syzkaller-00037-gb6dad5178cea #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAllocDmapLev+0x3e5/0x430 fs/jfs/jfs_dmap.c:1965 dbAllocCtl+0x113/0x920 fs/jfs/jfs_dmap.c:1809 dbAllocAG+0x28f/0x10b0 fs/jfs/jfs_dmap.c:1350 dbAlloc+0x658/0xca0 fs/jfs/jfs_dmap.c:874 dtSplitUp fs/jfs/jfs_dtree.c:974 [inline] dtInsert+0xda7/0x6b00 fs/jfs/jfs_dtree.c:863 jfs_create+0x7b6/0xbb0 fs/jfs/namei.c:137 lookup_open fs/namei.c:3492 [inline] open_last_lookups fs/namei.c:3560 [inline] path_openat+0x13df/0x3170 fs/namei.c:3788 do_filp_open+0x234/0x490 fs/namei.c:3818 do_sys_openat2+0x13f/0x500 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_openat fs/open.c:1388 [inline] __se_sys_openat fs/open.c:1383 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1383 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1f4e33f7e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc21129578 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f4e33f7e9 RDX: 000000000000275a RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f1f4e2ff080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f1f4e2ff110 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The bug occurs when the dbAllocDmapLev()function attempts to access dp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative. To rectify this, the patch introduces a safeguard within the dbAllocDmapLev() function. A check has been added to verify if leafidx is negative. If it is, the function immediately returns an I/O error, preventing any further execution that could potentially cause harm. Tested via syzbot.
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path() snd_hda_get_connections() can return a negative error code. It may lead to accessing 'conn' array at a negative index. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: net: mdio: validate parameter addr in mdiobus_get_phy() The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it.
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write() The "id" comes from the user. Change the type to unsigned to prevent an array underflow.
In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix nexthop hash size The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry.
In the Linux kernel, the following vulnerability has been resolved: FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6 index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]') CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> ================================================================================ Kernel panic - not syncing: UBSAN: panic_on_warn set ... CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 panic+0x30f/0x770 kernel/panic.c:340 check_panic_on_warn+0x82/0xa0 kernel/panic.c:236 ubsan_epilogue lib/ubsan.c:223 [inline] __ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> Kernel Offset: disabled Rebooting in 86400 seconds.. The issue is caused when the value of lp becomes greater than CTLTREESIZE which is the max size of stree. Adding a simple check solves this issue. Dave: As the function returns a void, good error handling would require a more intrusive code reorganization, so I modified Osama's patch at use WARN_ON_ONCE for lack of a cleaner option. The patch is tested via syzbot.
In the Linux kernel, the following vulnerability has been resolved: drm/amd: check num of link levels when update pcie param In SR-IOV environment, the value of pcie_table->num_of_link_levels will be 0, and num_of_levels - 1 will cause array index out of bounds
In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt
In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays.
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem.
In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Avoid reading beyond LUT array When the floor LUT index (drm_fixp2int(lut_index) is the last index of the array the ceil LUT index will point to an entry beyond the array. Make sure we guard against it and use the value of the floor LUT index. v3: - Drop bits from commit description that didn't contribute anything of value
In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add validity check for db_maxag and db_agpref Both db_maxag and db_agpref are used as the index of the db_agfree array, but there is currently no validity check for db_maxag and db_agpref, which can lead to errors. The following is related bug reported by Syzbot: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20 index 7936 is out of range for type 'atomic_t[128]' Add checking that the values of db_maxag and db_agpref are valid indexes for the db_agfree array.
In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential array underflow in ucsi_ccg_sync_control() The "command" variable can be controlled by the user via debugfs. The worry is that if con_index is zero then "&uc->ucsi->connector[con_index - 1]" would be an array underflow.
In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report Fix possible array out of bound access in mt7921_mcu_tx_rate_report. Remove unnecessary varibable in mt7921_mcu_tx_rate_report
In the Linux kernel, the following vulnerability has been resolved: net: atlantic: fix aq_vec index out of range error The final update statement of the for loop exceeds the array range, the dereference of self->aq_vec[i] is not checked and then leads to the index out of range error. Also fixed this kind of coding style in other for loop. [ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48 [ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]' [ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2 [ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022 [ 97.937611] Workqueue: events_unbound async_run_entry_fn [ 97.937616] Call Trace: [ 97.937617] <TASK> [ 97.937619] dump_stack_lvl+0x49/0x63 [ 97.937624] dump_stack+0x10/0x16 [ 97.937626] ubsan_epilogue+0x9/0x3f [ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 97.937629] ? __scm_send+0x348/0x440 [ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic] [ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic] [ 97.937644] aq_suspend_common+0x88/0x90 [atlantic] [ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic] [ 97.937653] pci_pm_suspend+0x7e/0x1a0 [ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0 [ 97.937657] dpm_run_callback+0x54/0x190 [ 97.937660] __device_suspend+0x14c/0x4d0 [ 97.937661] async_suspend+0x23/0x70 [ 97.937663] async_run_entry_fn+0x33/0x120 [ 97.937664] process_one_work+0x21f/0x3f0 [ 97.937666] worker_thread+0x4a/0x3c0 [ 97.937668] ? process_one_work+0x3f0/0x3f0 [ 97.937669] kthread+0xf0/0x120 [ 97.937671] ? kthread_complete_and_exit+0x20/0x20 [ 97.937672] ret_from_fork+0x22/0x30 [ 97.937676] </TASK> v2. fixed "warning: variable 'aq_vec' set but not used" v3. simplified a for loop
In the Linux kernel, the following vulnerability has been resolved: wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30
In the Linux kernel, the following vulnerability has been resolved: clk: visconti: prevent array overflow in visconti_clk_register_gates() This code was using -1 to represent that there was no reset function. Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0) condition was always true. This lead to an out of bounds access in visconti_clk_register_gates().
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user.
NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, data tampering, or information disclosure.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix negative array index read Avoid using the negative values for clk_idex as an index into an array pptable->DpmDescriptor. V2: fix clk_index return check (Tim Huang)
In the Linux kernel, the following vulnerability has been resolved: net: hns3: void array out of bound when loop tnl_num When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index may exceed array range within fpu_update_bw_bounding_box [Why] Coverity reports OVERRUN warning. soc.num_states could be 40. But array range of bw_params->clk_table.entries is 8. [How] Assert if soc.num_states greater than 8.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add array index check for hdcp ddc access [Why] Coverity reports OVERRUN warning. Do not check if array index valid. [How] Check msg_id valid and valid array index.
In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these.
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix array-index-out-of-bounds in diFree
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential array overflow in bpf_trampoline_get_progs() The cnt value in the 'cnt >= BPF_MAX_TRAMP_PROGS' check does not include BPF_TRAMP_MODIFY_RETURN bpf programs, so the number of the attached BPF_TRAMP_MODIFY_RETURN bpf programs in a trampoline can exceed BPF_MAX_TRAMP_PROGS. When this happens, the assignment '*progs++ = aux->prog' in bpf_trampoline_get_progs() will cause progs array overflow as the progs field in the bpf_tramp_progs struct can only hold at most BPF_MAX_TRAMP_PROGS bpf programs.
In the Linux kernel, the following vulnerability has been resolved: block: Fix handling of offline queues in blk_mq_alloc_request_hctx() This patch prevents that test nvme/004 triggers the following: UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9 index 512 is out of range for type 'long unsigned int [512]' Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x3b __ubsan_handle_out_of_bounds.cold+0x44/0x49 blk_mq_alloc_request_hctx+0x304/0x310 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core] nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics] nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop] nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop] nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics] nvmf_dev_write+0xae/0x111 [nvme_fabrics] vfs_write+0x144/0x560 ksys_write+0xb7/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae