In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: Avoid divide by zero in table status in Inline mode In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ...

In the Linux kernel, the following vulnerability has been resolved: spi: sn-f-ospi: Fix division by zero When there is no dummy cycle in the spi-nor commands, both dummy bus cycle bytes and width are zero. Because of the cpu's warning when divided by zero, the warning should be avoided. Return just zero to avoid such calculations.

In the Linux kernel, the following vulnerability has been resolved: block: prevent division by zero in blk_rq_stat_sum() The expression dst->nr_samples + src->nr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace.

In the Linux kernel, the following vulnerability has been resolved: gve: guard XDP xmit NDO on existence of xdp queues In GVE, dedicated XDP queues only exist when an XDP program is installed and the interface is up. As such, the NDO XDP XMIT callback should return early if either of these conditions are false. In the case of no loaded XDP program, priv->num_xdp_queues=0 which can cause a divide-by-zero error, and in the case of interface down, num_xdp_queues remains untouched to persist XDP queue count for the next interface up, but the TX pointer itself would be NULL. The XDP xmit callback also needs to synchronize with a device transitioning from open to close. This synchronization will happen via the GVE_PRIV_FLAGS_NAPI_ENABLED bit along with a synchronize_net() call, which waits for any RCU critical sections at call-time to complete.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominator defaults to 1 [WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. (cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7)

In the Linux kernel, the following vulnerability has been resolved: ad7780: fix division by zero in ad7780_write_raw() In the ad7780_write_raw() , val2 can be zero, which might lead to a division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw() is based on iio_info's write_raw. While val is explicitly declared that can be zero (in read mode), val2 is not specified to be non-zero.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix divide error in DM plane scale calcs dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add check for granularity in dml ceil/floor helpers [Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec)

In the Linux kernel, the following vulnerability has been resolved: fbdev: rivafb: fix divide error in nv3_arb() A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856

Found Linux Kernel flaw in the i740 driver. The Userspace program could pass any values to the driver through ioctl() interface. The driver doesn't check the value of 'pixclock', so it may cause a divide by zero error.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominators' default to 1 [WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize get_bytes_per_element's default to 1 Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix zero-division error when disabling tc cbs The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: prevent the risk of a division by zero As reported by Coverity, the logic at tpg_precalculate_line() blindly rescales the buffer even when scaled_witdh is equal to zero. If this ever happens, this will cause a division by zero. Instead, add a WARN_ON_ONCE() to trigger such cases and return without doing any precalculation.

In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator pbn_div before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator crb_pipes before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: ext4: check stripe size compatibility on remount as well We disable stripe size in __ext4_fill_super if it is not a multiple of the cluster ratio however this check is missed when trying to remount. This can leave us with cases where stripe < cluster_ratio after remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some unforeseen bugs like divide by 0. Fix that by adding the check in remount path as well.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the warning division or modulo by zero Checks the partition mode and returns an error for an invalid mode.

In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Handle err return when savagefb_check_var failed The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Add poll mod list filling check In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign linear_pitch_alignment even for VM [Description] Assign linear_pitch_alignment so we don't cause a divide by 0 error in VM environments

In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK> serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Rule: add

In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK> Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are.

In the Linux kernel, the following vulnerability has been resolved: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: <TASK> tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix division by zero in setup_dsc_config When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447) kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2)) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu After applying this patch, the driver no longer crashes when the monitor is connected and the system is rebooted. I believe this is the same issue reported for 3113.

In the Linux kernel, the following vulnerability has been resolved: fbmon: prevent division by zero in fb_videomode_from_videomode() The expression htotal * vtotal can have a zero value on overflow. It is necessary to prevent division by zero like in fb_var_to_videomode(). Found by Linux Verification Center (linuxtesting.org) with Svace.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt Determine if bb_fragments is 0 instead of determining bb_free to eliminate the risk of dividing by zero when the block bitmap is corrupted.

In the Linux kernel, the following vulnerability has been resolved: fbdev: sis: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8.

In the Linux kernel, the following vulnerability has been resolved: USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands. The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error).

In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8.

In the Linux kernel, the following vulnerability has been resolved: mm/damon: fix divide by zero in damon_get_intervals_score() The current implementation allows having zero size regions with no special reasons, but damon_get_intervals_score() gets crashed by divide by zero when the region size is zero. [ 29.403950] Oops: divide error: 0000 [#1] SMP NOPTI This patch fixes the bug, but does not disallow zero size regions to keep the backward compatibility since disallowing zero size regions might be a breaking change for some users. In addition, the same crash can happen when intervals_goal.access_bp is zero so this should be fixed in stable trees as well.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-mem: Add fix to avoid divide error For some SPI flash memory operations, dummy bytes are not mandatory. For example, in Winbond SPINAND flash memory devices, the `write_cache` and `update_cache` operation variants have zero dummy bytes. Calculating the duration for SPI memory operations with zero dummy bytes causes a divide error when `ncycles` is calculated in the spi_mem_calc_op_duration(). Add changes to skip the 'ncylcles' calculation for zero dummy bytes. Following divide error is fixed by this change: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI ... ? do_trap+0xdb/0x100 ? do_error_trap+0x75/0xb0 ? spi_mem_calc_op_duration+0x56/0xb0 ? exc_divide_error+0x3b/0x70 ? spi_mem_calc_op_duration+0x56/0xb0 ? asm_exc_divide_error+0x1b/0x20 ? spi_mem_calc_op_duration+0x56/0xb0 ? spinand_select_op_variant+0xee/0x190 [spinand] spinand_match_and_init+0x13e/0x1a0 [spinand] spinand_manufacturer_match+0x6e/0xa0 [spinand] spinand_probe+0x357/0x7f0 [spinand] ? kernfs_activate+0x87/0xd0 spi_mem_probe+0x7a/0xb0 spi_probe+0x7d/0x130

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix divide-by-zero in setup_geo() with zero far_copies setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero.

In the Linux kernel, the following vulnerability has been resolved: sound: ua101: fix division by zero at probe Add a missing sanity check for bNrChannels in detect_usb_format() to prevent a division by zero in playback_urb_complete() and capture_urb_complete(). USB core does not validate class-specific descriptor fields such as bNrChannels, so drivers must verify them before use. If a device provides bNrChannels = 0, frame_bytes becomes zero and is later used as a divisor in the URB completion handlers, leading to a kernel crash.

In the Linux kernel, the following vulnerability has been resolved: iio: proximity: hx9023s: Protect against division by zero in set_samp_freq Avoid division by zero when sampling frequency is unspecified.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that as "should not happen". Crash: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: <IRQ> nf_osf_match (net/netfilter/nfnetlink_osf.c:220) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:348) nf_hook_slow (net/netfilter/core.c:622) ip_local_deliver (net/ipv4/ip_input.c:265) ip_rcv (include/linux/skbuff.h:1162) __netif_receive_skb_one_core (net/core/dev.c:6181) process_backlog (net/core/dev.c:6642) __napi_poll (net/core/dev.c:7710) net_rx_action (net/core/dev.c:7945) handle_softirqs (kernel/softirq.c:622)

In the Linux kernel, the following vulnerability has been resolved: mptcp: do not account for OoO in mptcp_rcvbuf_grow() MPTCP-level OoOs are physiological when multiple subflows are active concurrently and will not cause retransmissions nor are caused by drops. Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly drifting towards tcp_rmem[2]. Remove such accounting. Note that subflows will still account for TCP-level OoO when the MPTCP-level rcvbuf is propagated. This also closes a subtle and very unlikely race condition with rcvspace init; active sockets with user-space holding the msk-level socket lock, could complete such initialization in the receive callback, after that the first OoO data reaches the rcvbuf and potentially triggering a divide by zero Oops.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+ RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362) Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)

In the Linux kernel, the following vulnerability has been resolved: media: ccs: Avoid possible division by zero Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential zero beacon interval in beacon tracking During fuzz testing, it was discovered that bss_conf->beacon_int might be zero, which could result in a division by zero error in subsequent calculations. Set a default value of 100 TU if the interval is zero to ensure stability.

In the Linux kernel, the following vulnerability has been resolved: drm/modes: Avoid divide by zero harder in drm_mode_vrefresh() drm_mode_vrefresh() is trying to avoid divide by zero by checking whether htotal or vtotal are zero. But we may still end up with a div-by-zero of vtotal*htotal*...

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: sysfs: Prevent div by zero Prevent a division by 0 when monitoring is not enabled.

In the Linux kernel, the following vulnerability has been resolved: usbnet: sanity check for maxpacket maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: cirrusfb: check pixclock to avoid divide by zero Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae